Hi sir, at your video of vrc 720 comment was close so I wrote here to contact you. Please can you explain at the 1.05 min of video why adaptive heat curve option should be desctivated? Thanks in advence..
Hello mate,was wondering for a bit of advice. because the installer is a bit unsure about all this. I have a new heat pump, Split/75 7kw 190l tank. With the arotherm fan outside. This VRC700 is on my indoor unit. And then l had the SensoComfort installed on the wall, with the gate way etc and the app. The man Said that the VRC700 was conflicting with Sensocomfort wall unit, that's what he was only assuming. There is a little blue box with a black knob, and it was clicking and it moves 180 degrees or ,something to do with the heating on off , the hot water . I think you know what it is and does l am clueless. Anyway he had to disconnect the VRC700 from my indoor unit, and said ,l need to find out but I don't think you can have both working together,and will have to have one or the other. I think ,perhaps the sensocomfort is not set up right to communicate as one, What do you think. could be going on here. I want the VRC700 reconnected to the indoor unit and l want to still have the sensocomfort working with the app. also. One other thing, I just looked at your video on how to set up the sensocomfort wall unit,do you think they are the right settings for Sweden,where l am. comments were turned off. Can get minus 20 here sometimes ,average minus 10 in Stockholm. Have 2 floors heated floors,did not understand that curve setting either. kind regards Kevin
Hi guys, can anyone give me a clue how to open/separate the Vailant VRC 700/6…….I’ve been trying to separate the unit from the base to no avail ! Any suggestions please ? Thanks
How does the Maximum Flow Temperature that has been set interact with the Heating Curve? e.g. If the Maximum Flow Temp has been set to 40C, and Heating Curve 1.0 is selected does this mean that the flow temperature will never go above 40C even if the outside temperature drops below about 6C? So even if the outside temperature was -15 you would still have a flow temp of 40C?
Yes, if setting the maximum flow temp, that will be the highest temperature delivered. It will work to the heat curve and max out at whatever this setting is adjusted to. If you select ‘Y’ to adaptive heat curve, if you ever override the room temp, i.e turn it up to 30 degrees then this will influence the heat curve as it will ramp up to a target flow temperature needed to achieve that. Always best to set that to ‘N’ as it will just work to weather compensation values from the chart in the installation manual
Hi sir, at your video of vrc 720 comment was close so I wrote here to contact you. Please can you explain at the 1.05 min of video why adaptive heat curve option should be desctivated? Thanks in advence..
Hello mate,was wondering for a bit of advice. because the installer is a bit unsure about all this.
I have a new heat pump, Split/75 7kw 190l tank. With the arotherm fan outside. This VRC700 is on my indoor unit. And then l had the SensoComfort installed on the wall, with the gate way etc and the app. The man Said that the VRC700 was conflicting with Sensocomfort wall unit, that's what he was only assuming. There is a little blue box with a black knob, and it was clicking and it moves 180 degrees or ,something to do with the heating on off , the hot water . I think you know what it is and does l am clueless. Anyway he had to disconnect the VRC700 from my indoor unit, and said ,l need to find out but I don't think you can have both working together,and will have to have one or the other. I think ,perhaps the sensocomfort is not set up right to communicate as one, What do you think. could be going on here. I want the VRC700 reconnected to the indoor unit and l want to still have the sensocomfort working with the app. also. One other thing, I just looked at your video on how to set up the sensocomfort wall unit,do you think they are the right settings for Sweden,where l am. comments were turned off. Can get minus 20 here sometimes ,average minus 10 in Stockholm. Have 2 floors heated floors,did not understand that curve setting either. kind regards Kevin
Can I please get your help on my SensonComfort? some of the settings are really not making sense
What should i buy this thermostat or vsmart erelax?
Hello. Can you make it more than 50c° hot water. I set it for 60©° and all day long make it for aprox 50©° and not make more. Coming my big family in Christmas and 190l 50©° shoud me not enough.
Thanks
If you have an aroTHERM Plus you could, but not if you have an aroTHERM
I was curious about the Parallel Cylinder Charging setting. How does this work and when might you want to turn this on? Great video BTW!
That’s if you have 2 x hot water cylinders
Hi guys, can anyone give me a clue how to open/separate the Vailant VRC 700/6…….I’ve been trying to separate the unit from the base to no avail ! Any suggestions please ?
Thanks
How does the Maximum Flow Temperature that has been set interact with the Heating Curve? e.g. If the Maximum Flow Temp has been set to 40C, and Heating Curve 1.0 is selected does this mean that the flow temperature will never go above 40C even if the outside temperature drops below about 6C? So even if the outside temperature was -15 you would still have a flow temp of 40C?
Yes, if setting the maximum flow temp, that will be the highest temperature delivered. It will work to the heat curve and max out at whatever this setting is adjusted to. If you select ‘Y’ to adaptive heat curve, if you ever override the room temp, i.e turn it up to 30 degrees then this will influence the heat curve as it will ramp up to a target flow temperature needed to achieve that. Always best to set that to ‘N’ as it will just work to weather compensation values from the chart in the installation manual
Do those setting will be efficient for 8kW air source heat pump?
I have a similar question - what settings would need to be changed for if the AroTherm 7KW ASHP was installed?
Traduci in Italiano