Купил отдельный дом чтобы мамка не прибила за вонь от пластика , купил духовку и противень по той же причине . Сделал ручку для ножа , правда она сломалась на следующий день . Теперь я доволен . Правда надышавшись парами пластика я заработал рак лёгких )))
If the plastics is labeled with a 2 inside of the ♻️ it doesn’t emit vapor unless burned. If you keep it at a temperature just enough to melt it your fine.
It doesn’t take a rocket scientist to figure out not to use your kitchen oven. I have a toaster oven I use solely for powder coating parts. AWESOME BABY! On top of that he is clearly not in his kitchen
I think this TH-cam channel is really really dangerous, using a grinder in the kitchen, breathing toxic fumes, what's next? shaving your facial hair with a dull axe? I hope he doesn't take this comment as an idea for a upcoming video 😂
This is an inspiring video. If you really want something with a certain colour pattern, this gives you unlimited options. If you're just disillusioned with public recycling availability though, I'm not sure this is much of an improvement. 1. Heating plastic in the oven could be a fire risk and probably a risk to your respiratoty system. Best to take the show outside on a windy day to reduce that latter risk. 2. The trimming operations are releasing very small particles into the environment, some of which could be so small as to end up in your lungs. 3. These lids can be sent through current recycling channels which would probably do a better job of releasing less of it back into the environment. I prefer wooden handles on my knives for aesthetic and handling reasons. Making them out of wood is kind of more interesting and more than challenging enough. Thank you for inspiring me to think about it.
You left out some important information. Not all plastic is the same. It looks like you used hdpe ( the recycle symbol with a 2). It's important to use all hdpe
Oh Lord, don't be such a little nerd -- does it really matter in the whole scheme of things ?.. this is t a giant factory, it's just a guy ( or gal ) in his own house just making a little knife handle -- let the fellow enjoy his project without a bunch of "Well Actually....."... Sheesh Eric, lighten up bro...
Есть 2 важных момента: 1) пластик, когда плавится становится сверхтоксичным и дышать этой дрянью без средств защиты - крайне опасно, 2) отшкрябать потом эту спекшуюся массу от противня крайне сложно.
Как в анекдоте про изготовление из паровоза стратегической ракеты. *окончательная доводка изделия после правильной сборки по чертежам проектной документации, осуществляется с помощью напильника.)
Having worked for several years out at Williams Industries in Shelbyville Indiana, plastic gives off gases when it's molten!! I would have preferred your safety over a new knife handle myself.
...если руки растут вместо ног, тебя ничто не спасёт -, там гореть то нечему, сам так-же рукоятки делаю дома на кухне,-вытяжка удаляет все пары и выделения!!!
Having taught college level chemistry and biology coupled with a true love of healthy lungs my advice is DO NOT melt (nor even heat) plastic. There are all types of plastics, particularly cheaper ones, that give noxious, carcinogenic and worse fumes of all sorts when melted. If you want things like antimony or polychlorinated hydrocarbons cruising your circulatory system and, perhaps, finding a nice retirement spot in your liver, then, maybe. Otherwise, any melting of plastic should be done in a chemistry lab grade fume hood and not simply to make a damn knife handle. Don't try this at home. I strongly suspect that the carbon footprint of making one knife handle at a time is much larger than that same handle being made on a larger scale, in a safe manner.
Нож исправил противень загубил по-моему этот Нож Даже новый стоил бы дешевле чем этот лист в духовку И кстати идея Стара как мир ещё в восьмидесятых девяностых годах у нас этого всю практиковали только при этом противень живы оставались😉 живу в России Сибирь Барнаул
It's a great idea, but in real terms, the cost of the energy, both financial to you and production to the environment, required in every step of this process, is probably far higher than the cost of getting the plastic lids to a professional recycling center.
Way to crap on someone. This guy does something productive with plastic that normally gets thrown away and takes the time and energy to make and post a video, and you sit on your high horse and lay out some arrogant comment? Stop being a horrible person hiding behind your keyboard.
Actually, getting everyday people to literally recycle is the way. Look it up. The plastic bottles we drop at the recycling center do not get recycled. Only glass and aluminum can be recycled easily.
This is why big corporations should pay part and use it as leverage for governments that they supply products recycled them. But they’re greedy pigs who don’t spend profits on things like recycling people should do it.
All that electricity to melt a little bit of plastic not a good idea plastic fumes deadly to the kids in the house stupid idea wasted a perfectly good piece of wood stupid idea
Профанация чистой воды. 1.Пластик при нагреве выделяет вредные вещества. 2.На производстве такие изделия изготавливаются под давлением в пресс формах. 3. Готовить в этой микроволновке больше нельзя.
@@krasnonosov51 вонь и расходы энергии и инструментов → золотые тапочки. В любом хозяйственном за 300 руб можно купить, и не портить воздух отравой, и энергию не мотать
@@Penoctep Во времена моей юности говорили : "ПОРА ШИТЬ КРАСНЫЕ ВАЛЕНКИ" - имелось ввиду "тебе пора в сумасшедший дом", или : "ПОРА ЗАКАЗЫВАТЬ БЕЛЫЕ ТАПОЧКИ" (в гроб!). Так что я сделал многозначительный намёк. Жаль, что забываются старые русские обороты речи и нам становится затруднительным понимать друг друга...
На дворе XXI век - технологии соответствующие! Если сложить все отходы из пластика, сколько можно создать таких ножей? Мы сможем ими торговать с другими Галактиками!
Отец так делал ручку ножа, но у него был самодельный электрический тигель. Кидал в него нарезанный пластик от фляжек. Как он потом доставал оттуда пластик не знаю, может погружал внутрь нож и ждал пока остынет. Ручки красивые получались, пестрые.
Jaký tohle mělo smysl? Zničit plech do trouby, ten smrad z toho plastu musel být velmi zdravý. Tolik času pro takovou hrůzu na noži, který byl hezčí bez držadla, sorry ale tímhle se chlubit?
Merci pour le partage. A quelle température réglez-vous votre four et surtout combien de temps y laisse t- les plastiques? Thank you for sharing. What temperature do you set your oven to and especially how long do you leave the plastics there?
@@didiersee Yw, but watch it closely so it doesn’t burn 🔥 and smoke 💨 . If it starts melting quickly, turn it down to 200° and watch it closely, it might not take that long.
@punchaleksey,у многих Самодельщиков Сейчас так. "Если у тебя НЕТ Денег,то ты можешь быстро и бесплатно сделать САМ...но сначала,тебе нужно купить Набор Слесарки за 100k Рублей(если не больше)".
So you appear to have set your toaster oven for about an hour at 170 degrees; is that Fahrenheit or Celsius? 170 Fahrenheit would be less than the boiling point for water so my gut says that probably isn’t quite hot enough. If it’s Celsius, that translates to roughly 350 degrees Fahrenheit. That seems more like it. Great project! I’m going to have to try this! I’d be tempted to line my baking tray with foil or something so I wouldn’t forever have melted plastic stuck to it afterwards!
I agree as nice as his mom made orbital stationary sander was made, he could have gone up incrementally from 100, to too grit, then 200, 400, 800, and polished it with some 2000 and made it shine. The piece obviously meant something to him to take the time and effort to engineer this whole thing, and the impetus to execute it. People here are all down on this creative man. Saying the plastic fumes will kill him, and that is just a crock of $#!+. Burning plastics produces carcinogens, not melting it, or everything would be dead for miles around every plastic goods manufacturer in the world. Melting plastic doesn't hurt anything, and that's why he was very prominent in showing the temperature to set the toaster oven on, I zoomed in to see because I deemed it important because he pointed it out. 200°, which I assume was in fahrenheit though I'm unsure. I wonder if one could grind up and melt down plastic, then carve a mold like a clay roof tile, and reuse bottles and scrap plastic to make plastic roofing tiles. I could probably make this happen, rudimentally, like a proof of concept using some aluminum to cover the wood so the makeshift mold could be reused. You've given me something to think about...
I like the idea and I may very well give this a try. The main problem as I see it. Is that you cannot work very effectively on the front of the knife, where the handle meets the blade at the ricasso area. That would be most difficult to sand, file and shape it there. You may do damage to the blade. Other than that, really well done. All those water bottle caps do come in handy.
Dremel tool. &/Or, create the halves of the handle separately & then bolt/screw them onto the handle, so you can fully polish them without the knife getting in the way.
ага. у каждого есть дома гриндер и ленточная пила для лёгкой переработки пластиковых отходов в домашних условиях)) и дым из микроволновки наверняка не токсичен и будет люб всем соседям))
Sure, it’s likely a fun project and if entertainment is your goal then go for it - but any suggestion that there is a environmental benefit is only a reflexive thought.
Дорогой однако ножичек 🤣🤣🤣 энергия на плавку, свет , и инструмент, диск болгарки- нах , наждак, а главное время 🤣👍 и время заработать на свет и инструмент ....... итог двойная трата времени , когда ему цена 500р в магазине
... отличная идея как сделать ручку для ножа, надо будет попробовать как раз имеется в наличии со сломанной ручкой, спасибо за информацию, здоровья и благополучия, новых творческих успехов!!!
@@СергейУколов-э7о да, всё получилось, только на поддон я постелил стеклоткань, чтобы не отдирать шпателем, а форму рукоятки обрабатывал на лобзиковом станке!- рукоятка получилась- огонь, друг такую-же просит на кукри 🤝👈👍🤔🤫💪!!!
𝐇𝐢𝐢 𝐟𝐫𝐢𝐞𝐧𝐝𝐬 जो भी इस वक्त मेरा कमेंट पढ़ रहा / रही है हम लोग एक दूसरे के लिए अनजान है पर मैं फिर भी भगवान से प्रार्थना करती हूं कि आप आपकी लाइफ में अभी कोई टेंशन चल रहा हो तो वह दूर हो जाए और आप हमेशा खुश रहें😘😘😘..
1 Corinthians 15:1-4 KJV Bible [1] Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand; [2] By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain. [3] For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures; [4] And that he was buried, and that he rose again the third day according to the scriptures: Ephesians 2:8-9 KJV Bible [8] For by grace are ye saved through faith; and that not of yourselves: it is the gift of God: [9] Not of works, lest any man should boast. Romans 10:9-13 KJV Bible [9] That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved. [10] For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation. [11] For the scripture saith, Whosoever believeth on him shall not be ashamed. [12] For there is no difference between the Jew and the Greek: for the same Lord over all is rich unto all that call upon him. [13] For whosoever shall call upon the name of the Lord shall be saved. John 3:16 KJV Bible For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life. John 14:6 KJV Bible Jesus saith unto him, I am the way, the truth, and the life: no man cometh unto the Father, but by me.
It's a stupid idea how much energy did he use to melt that plastic using electricity to run the grinder wasting the perfectly good piece of wood to make I'm all then he broke the wood apart and threw it away not a good idea stupid is what it is
![[LIVE] BABYMONSTER(베이비몬스터) - DRIP | 두시탈출 컬투쇼](http://i.ytimg.com/vi/UG05pxLGwzc/mqdefault.jpg)
Купил отдельный дом чтобы мамка не прибила за вонь от пластика , купил духовку и противень по той же причине . Сделал ручку для ножа , правда она сломалась на следующий день . Теперь я доволен . Правда надышавшись парами пластика я заработал рак лёгких )))
Sarkasmus pur👍
Самый здравый комментарий, браво!
Надо очень любить этот копеечный нож, чтобы так заморочиться.
Мой дядька за свою жизнь немерено ножей изготовил с такими ручками - и все функционировали исправно
Ahahha sad but true
@@sergeyanikolskiy дело не в том любишь или нет. дело в том. чтобы сделать своими руками.
Every time you bake something in your oven you can infuse some good plastic vapors into your food! AWESOME BABY!
My thoughts exactly.
I said dude! You gotta do that outside
If the plastics is labeled with a 2 inside of the ♻️ it doesn’t emit vapor unless burned. If you keep it at a temperature just enough to melt it your fine.
Ummm, or you can get a toaster oven from the thrift store devoted to non -food uses...
It doesn’t take a rocket scientist to figure out not to use your kitchen oven. I have a toaster oven I use solely for powder coating parts. AWESOME BABY! On top of that he is clearly not in his kitchen
@@taylorrussell5490Hello, how many degrees and how many minutes you keep the powder coated parts inside?
This is amazing me and the children have been breathing the fumes from this and we all feel amazing, hairs starting to fall out in clumps though
I think this TH-cam channel is really really dangerous, using a grinder in the kitchen, breathing toxic fumes, what's next? shaving your facial hair with a dull axe? I hope he doesn't take this comment as an idea for a upcoming video 😂
Too funny!! :)
You breathe in more fumes waiting for the light to change in a big city
This is an inspiring video. If you really want something with a certain colour pattern, this gives you unlimited options.
If you're just disillusioned with public recycling availability though, I'm not sure this is much of an improvement. 1. Heating plastic in the oven could be a fire risk and probably a risk to your respiratoty system. Best to take the show outside on a windy day to reduce that latter risk.
2. The trimming operations are releasing very small particles into the environment, some of which could be so small as to end up in your lungs.
3. These lids can be sent through current recycling channels which would probably do a better job of releasing less of it back into the environment.
I prefer wooden handles on my knives for aesthetic and handling reasons.
Making them out of wood is kind of more interesting and more than challenging enough.
Thank you for inspiring me to think about it.
I use bottle tops as targets for my air rifle. I end up with lots of bits. Thanks to you i can now reuse + mold into more interesting shapes. Cheers!
You left out some important information. Not all plastic is the same. It looks like you used hdpe ( the recycle symbol with a 2). It's important to use all hdpe
As tampas devem são polietileno de baixa densidade. Eram pouco úteis para reciclar e bem ruins para a finalidade do vídeo.
Oh Lord, don't be such a little nerd -- does it really matter in the whole scheme of things ?.. this is t a giant factory, it's just a guy ( or gal ) in his own house just making a little knife handle -- let the fellow enjoy his project without a bunch of "Well Actually....."... Sheesh Eric, lighten up bro...
Есть 2 важных момента: 1) пластик, когда плавится становится сверхтоксичным и дышать этой дрянью без средств защиты - крайне опасно, 2) отшкрябать потом эту спекшуюся массу от противня крайне сложно.
вопрос где тут домашнии условия)
@@jrll1944 а при чем тут домашние условия? Я писал про токсичность пластика: а он одинаково опасен, что в цеху, что на кухне, когда плавится
@@AndreyMr9999 ты чет серьёзный слишком юмора не понял дядь)) хорошего дня
Согласен @AndreyMr9999
Да от противня фигня. А вот от вони в микроволновке уже никогда не избавишься.
Как в анекдоте про изготовление из паровоза стратегической ракеты.
*окончательная доводка изделия после правильной сборки по чертежам проектной документации, осуществляется с помощью напильника.)
Having worked for several years out at Williams Industries in Shelbyville Indiana, plastic gives off gases when it's molten!! I would have preferred your safety over a new knife handle myself.
Как литейщик могу сказать-это быстрый способ переработать дом на пепелище-малейшая искра и все это вспыхнет
...если руки растут вместо ног, тебя ничто не спасёт -, там гореть то нечему, сам так-же рукоятки делаю дома на кухне,-вытяжка удаляет все пары и выделения!!!
Having taught college level chemistry and biology coupled with a true love of healthy lungs my advice is DO NOT melt (nor even heat) plastic. There are all types of plastics, particularly cheaper ones, that give noxious, carcinogenic and worse fumes of all sorts when melted. If you want things like antimony or polychlorinated hydrocarbons cruising your circulatory system and, perhaps, finding a nice retirement spot in your liver, then, maybe. Otherwise, any melting of plastic should be done in a chemistry lab grade fume hood and not simply to make a damn knife handle. Don't try this at home. I strongly suspect that the carbon footprint of making one knife handle at a time is much larger than that same handle being made on a larger scale, in a safe manner.
This is amazing I love it when people recycle broken stuff!
💙❤️🧡💛💜
How much energy wasted to melt that little bit of plastic
@@mikecummings6593 a lot lmao 🥴
Whilst wasting wood and using a load of electricity.
Нож исправил противень загубил по-моему этот Нож Даже новый стоил бы дешевле чем этот лист в духовку И кстати идея Стара как мир ещё в восьмидесятых девяностых годах у нас этого всю практиковали только при этом противень живы оставались😉 живу в России Сибирь Барнаул
Хиву в средней полосе, та же фигня. Делали при мне в 80е, но наверняка и раньше. Только вот ютуба тогда не было, чтоб каждый чих показывать😃
чтобы загубить хорошее дело достаточно тупорылого отзыва вышеуказанного деловара
It's a great idea, but in real terms, the cost of the energy, both financial to you and production to the environment, required in every step of this process, is probably far higher than the cost of getting the plastic lids to a professional recycling center.
I believe that what you refer to as "in real terms" is the reason why our planet goes kaputt ...
Way to crap on someone. This guy does something productive with plastic that normally gets thrown away and takes the time and energy to make and post a video, and you sit on your high horse and lay out some arrogant comment? Stop being a horrible person hiding behind your keyboard.
But it's really cool!
Actually, getting everyday people to literally recycle is the way. Look it up. The plastic bottles we drop at the recycling center do not get recycled. Only glass and aluminum can be recycled easily.
This is why big corporations should pay part and use it as leverage for governments that they supply products recycled them. But they’re greedy pigs who don’t spend profits on things like recycling people should do it.
Just recycled some plastic in my oven, feeling satisfied! 💪🏼
おぉ！色んな色混ざっててきれい！
That is so cool and so easy.Thanks for the inspiration on my next project!
very nice! this man has excellent skills.
Now, that was really neat. I'm gonna use it on an old (1888) hand hatchet.
All that electricity to melt a little bit of plastic not a good idea plastic fumes deadly to the kids in the house stupid idea wasted a perfectly good piece of wood stupid idea
you're gonna give an antique hatchet a shitty plastic handle?
Nice, thanks
@@mikecummings6593 get yourself an old back yard grill works just as good and a metal tray youll NEVER use to cook food on
Make a handle out of wood and live to breathe another day.
What is the temperature and how long does it have to be in the oven?
Man so much time and effort.
Not to mention the chemicals from melting plastic is toxic to your bloodstream
Профанация чистой воды. 1.Пластик при нагреве выделяет вредные вещества. 2.На производстве такие изделия изготавливаются под давлением в пресс формах. 3. Готовить в этой микроволновке больше нельзя.
This is very innovative! As I don't have any of those tools or skills, I'd still have to buy a new knife 😂
Buying a knife is faster
Great job, thank for share ❤
Гайд про то, как засрать противень. Круть
Хорошая идея с пробками( крышками). Сгодится может не только для рукоятки для ножа! 👍❤👏👏👏🍒✌🇷🇺🖐
Да! Можно делать тапочки...
@@krasnonosov51 вонь и расходы энергии и инструментов → золотые тапочки.
В любом хозяйственном за 300 руб можно купить, и не портить воздух отравой, и энергию не мотать
@@Penoctep Во времена моей юности говорили : "ПОРА ШИТЬ КРАСНЫЕ ВАЛЕНКИ" - имелось ввиду "тебе пора в сумасшедший дом", или : "ПОРА ЗАКАЗЫВАТЬ БЕЛЫЕ ТАПОЧКИ" (в гроб!). Так что я сделал многозначительный намёк. Жаль, что забываются старые русские обороты речи и нам становится затруднительным понимать друг друга...
@@Penoctep,так у некоторых есть за що купить Инструменты,Станки,тратя Десятки Тысяч Рублей,но НЕТ 300 Рублей для Ножа.
Для лучшего сцепления металла с пластиком,нужно было ручку ножа подогреть градусов до 60.
И так сойдёт.
С помощью горячего клея быстрее и не надо ничего портить 🙄 но идея для статуэток пригодиться... конечно лучше подстелить фольгу...
This will be fantastic in the hippy-dippy apocalypse. Thanks.
Инструкция как провонять пластмассой духовку, убить противень ради китайского ножа. Такая идея прокатит только в промышленных масштабах.
Genial ! Justo en mi casa tengo todas esas herramientas de pulir cortar industriales 😂😂😂
WOW amazing! Thank you for sharing this video. I learned a lot. I'm new here
Beauty. Well done! My only worry the possible fumes from plastic. Perhaps a mask and good ventilation? Very interesting, thank you
That's gonna smell great when that plastic melts.
На дворе XXI век - технологии соответствующие! Если сложить все отходы из пластика, сколько можно создать таких ножей? Мы сможем ими торговать с другими Галактиками!
Wenn ich das machen muss, werde ich nie wieder Sachen kaufen, die in Plastik verpackt sind!
Отец так делал ручку ножа, но у него был самодельный электрический тигель. Кидал в него нарезанный пластик от фляжек. Как он потом доставал оттуда пластик не знаю, может погружал внутрь нож и ждал пока остынет. Ручки красивые получались, пестрые.
The fumes the plastic creates in your oven is marvelous for bringing on early Alzheimers 😂
"Easily..." If you have a full outdoor workshop with good ventilation.
Эта ручка удешевляет железку. А сколько труда и мороки. Только если для видоса. Когда больше совсем нечем заняться.
Jaký tohle mělo smysl? Zničit plech do trouby, ten smrad z toho plastu musel být velmi zdravý. Tolik času pro takovou hrůzu na noži, který byl hezčí bez držadla, sorry ale tímhle se chlubit?
Great Idea! The handle of my knife broke and now I know how to fix it! Thank you!
Don’t use your wife’s toaster oven!
Merci pour le partage. A quelle température réglez-vous votre four et surtout combien de temps y laisse t- les plastiques?
Thank you for sharing. What temperature do you set your oven to and especially how long do you leave the plastics there?
I would try 450° for 45 minutes.
@@scooterp7009Thanks ;)
@@didiersee
Yw, but watch it closely so it doesn’t burn 🔥 and smoke 💨 . If it starts melting quickly, turn it down to 200° and watch it closely, it might not take that long.
прям супер ролик, у всех же имеется слесарка со всем необходимым инструментом 🤣🤣🤣
@punchaleksey,у многих Самодельщиков Сейчас так.
"Если у тебя НЕТ Денег,то ты можешь быстро и бесплатно сделать САМ...но сначала,тебе нужно купить Набор Слесарки за 100k Рублей(если не больше)".
So you appear to have set your toaster oven for about an hour at 170 degrees; is that Fahrenheit or Celsius? 170 Fahrenheit would be less than the boiling point for water so my gut says that probably isn’t quite hot enough. If it’s Celsius, that translates to roughly 350 degrees Fahrenheit. That seems more like it. Great project! I’m going to have to try this! I’d be tempted to line my baking tray with foil or something so I wouldn’t forever have melted plastic stuck to it afterwards!
Hello, it's celcius. Channel owner Turkish, probably won't answer to english comments.
No bardzo łatwo !!! Każdy ma w domu piłę taśmową imadło i całą gromadę innych narzędzi. Efekt wątpliwy
I agree as nice as his mom made orbital stationary sander was made, he could have gone up incrementally from 100, to too grit, then 200, 400, 800, and polished it with some 2000 and made it shine. The piece obviously meant something to him to take the time and effort to engineer this whole thing, and the impetus to execute it. People here are all down on this creative man. Saying the plastic fumes will kill him, and that is just a crock of $#!+. Burning plastics produces carcinogens, not melting it, or everything would be dead for miles around every plastic goods manufacturer in the world. Melting plastic doesn't hurt anything, and that's why he was very prominent in showing the temperature to set the toaster oven on, I zoomed in to see because I deemed it important because he pointed it out. 200°, which I assume was in fahrenheit though I'm unsure. I wonder if one could grind up and melt down plastic, then carve a mold like a clay roof tile, and reuse bottles and scrap plastic to make plastic roofing tiles. I could probably make this happen, rudimentally, like a proof of concept using some aluminum to cover the wood so the makeshift mold could be reused. You've given me something to think about...
Сколько пиваса надо выпить ради ножика?
We all know that he does all this things for TH-cam. More views, more money.
Great idea! Thank you for sharing this-
Stupid idea he wasted all that electricity to melt a little bit of plastic
@@mikecummings6593 у нас электричество дешёвое. дешевле этих пробок, в деревне 3 руб киловат
@@Виктор-г3х English
Неплохой топор получился👍
Must get myself a work shop with all these tools then I can make a handle for a knife that I don’t have 😃
a very shitty, very ugly handle, mind
A bandeja que foi pro forno com as tampas, deve custar mais que a faca
well done from Nevada. USA
Даже никто не пробуйте, выкинула всё вместе со сковородой!!! Здоровье дороже!
سپاسگزارم از ویدیوی خوبت👍✌️
Примерно также сделал ручку для ключа, без формы, просто срезал лишнее.
Wow amazing 👍
ขี้ช่างจับตั๊กแตน เอาพลาสติกไปเข้าเตาอบ ไม่คิดว่ากลิ่นพลาสติกเเละไอระเหยสารพิษจะไม่สูบดมเข้าปอดหรือเเถมถาดที่ ใช้ลองพลาสติกก็เสียหาย คุ้มตรงไหนครับ
Very Nice and so individual. Good jod👍
Ever since I saw a kid make a slingshot I've been saving caps. Like this better.
I don’t think so.
Hi my friend, your work is great, I like your idea👍👌👏💙
Cool Batik Optik 🙂👍
Thanks for sharing, I have so many ideas now. Thank you
Considering how much work that was, I wouldnt call that easy.
I like the idea and I may very well give this a try. The main problem as I see it. Is that you cannot work very effectively on the front of the knife, where the handle meets the blade at the ricasso area. That would be most difficult to sand, file and shape it there. You may do damage to the blade. Other than that, really well done. All those water bottle caps do come in handy.
You could try taping it off or use a release agent like an oil there. That way the plastic wouldn't stick to the metal.
More work on that end of the form/mold.
@@socalzaps2848 Where I live, we have dollar stores that sell broiling pans for 4 dollars. You would probably be able to use them more than once.
Dremel tool. &/Or, create the halves of the handle separately & then bolt/screw them onto the handle, so you can fully polish them without the knife getting in the way.
ага. у каждого есть дома гриндер и ленточная пила для лёгкой переработки пластиковых отходов в домашних условиях)) и дым из микроволновки наверняка не токсичен и будет люб всем соседям))
но у всех есть ютуб чтобы автор получил миллионы просмотров
Испортить противень ради ручки для ножа. Оно того стоит?
Sure, it’s likely a fun project and if entertainment is your goal then go for it - but any suggestion that there is a environmental benefit is only a reflexive thought.
I can’t wait for my dad to come back with the milk so I can try it.
Theres a gold mine of plastic in your local landfill 😸💕
Fanstastic work 👏👌 thanks my friend👍👍👍👍👍
This project is very good!
O plastikleri fırında pişirirsem annem beni öldürür 😅.
nice and after all looks like garbage
U r intelligent experts
all the grinding creates micro plastic like hell...
better avoid buying plastic packaging at all!
that was interesting to watch but nothing about that was "easy" it takes a lot of tools and skill. looks cool tho 👌
congratulations, you just sped up the formation of microplastics
I'm going to do this, BUT.. I'm going to use Crock-Pot / Slow Cooker Liner bags (safe to 400 degs).
Дорогой однако ножичек 🤣🤣🤣 энергия на плавку, свет , и инструмент, диск болгарки- нах , наждак, а главное время 🤣👍 и время заработать на свет и инструмент ....... итог двойная трата времени , когда ему цена 500р в магазине
... отличная идея как сделать ручку для ножа, надо будет попробовать как раз имеется в наличии со сломанной ручкой, спасибо за информацию, здоровья и благополучия, новых творческих успехов!!!
Ну как? Сделали ручку? Что получилось из коробочек?
@@СергейУколов-э7о да, всё получилось, только на поддон я постелил стеклоткань, чтобы не отдирать шпателем, а форму рукоятки обрабатывал на лобзиковом станке!- рукоятка получилась- огонь, друг такую-же просит на кукри 🤝👈👍🤔🤫💪!!!
Как засрать квартиру в кратчайшие сроки... Или, вспоминая фразу из нашего фильма: "Дядя Петя, ты дурак?"
@user-ts9es8zk5p,когда Автору дали Подзатыльник:
-Ай,Ноге больно...
-Ты що,дypaк?
Interesting, but I don’t think the effort justifies the result. Remember, just because you can doesn’t mean you should. Cheers!
باسلام دوست عزیز من هم خواستم پلاستیک مایع درست کنم ولی مثل ساخت شما خمیر وروان نمیشه وبصورت یکپارچه به هم چسبیده راه حل این چیست
Hermoso, las botellas tambien sirben para derretir o solo las tapas?
Почему не полируешь самодельный картоным кругом, который ты сделал и выложил видео? Странно....
produce microplastics
𝐇𝐢𝐢 𝐟𝐫𝐢𝐞𝐧𝐝𝐬 जो भी इस वक्त मेरा कमेंट पढ़ रहा / रही है हम लोग एक दूसरे के लिए अनजान है पर मैं फिर भी भगवान से प्रार्थना करती हूं कि आप आपकी लाइफ में अभी कोई टेंशन चल रहा हो तो वह दूर हो जाए और आप हमेशा खुश रहें😘😘😘..
1 Corinthians 15:1-4
KJV Bible
[1] Moreover, brethren, I declare unto you the gospel which I preached unto you, which also ye have received, and wherein ye stand;
[2] By which also ye are saved, if ye keep in memory what I preached unto you, unless ye have believed in vain.
[3] For I delivered unto you first of all that which I also received, how that Christ died for our sins according to the scriptures;
[4] And that he was buried, and that he rose again the third day according to the scriptures:
Ephesians 2:8-9
KJV Bible
[8] For by grace are ye saved through faith; and that not of yourselves: it is the gift of God:
[9] Not of works, lest any man should boast.
Romans 10:9-13
KJV Bible
[9] That if thou shalt confess with thy mouth the Lord Jesus, and shalt believe in thine heart that God hath raised him from the dead, thou shalt be saved.
[10] For with the heart man believeth unto righteousness; and with the mouth confession is made unto salvation.
[11] For the scripture saith, Whosoever believeth on him shall not be ashamed.
[12] For there is no difference between the Jew and the Greek: for the same Lord over all is rich unto all that call upon him.
[13] For whosoever shall call upon the name of the Lord shall be saved.
John 3:16
KJV Bible
For God so loved the world, that he gave his only begotten Son, that whosoever believeth in him should not perish, but have everlasting life.
John 14:6
KJV Bible
Jesus saith unto him, I am the way, the truth, and the life: no man cometh unto the Father, but by me.
So you heat up plastic molecules to a temperature of toxicity? This replaces the toxic waste of plastic trash?
Thats a great idea
Oh, how clever!
Unglaublich bescheuerte Idee
the easy way to clean the furry finish after sanding is to use a jet lighter and just run over the surface to melt just the surface and make it shiny
What a great project! Thank you!
It's a stupid idea how much energy did he use to melt that plastic using electricity to run the grinder wasting the perfectly good piece of wood to make I'm all then he broke the wood apart and threw it away not a good idea stupid is what it is
@@mikecummings6593 yeah he should have used the wood instead to make the handle and it would have looked 10 times better than hunk of garbage!
Где сковородка из превьюхи?
Genial... Genial 😄🇨🇱 existen ideas Buenas...pero esta es d las Muy buenas...
Да уж, когда коту заняться нечем он одно место лижет, а здесь коты в сторонке обкуриваются ХА!
Uma forma destruída... E o forno ainda vai ser usado pra cozinhar comida?
Interesting! I'll try..
So, was the cooking tray thrown away?