Man, this is one of the best tutorials I have ever watched. A bit too fast in my opinion, but at the same time you get a really nice object few really little time. Congratulations, I have enjoyed the result a lot. Cheers!
Thank you for these videos! I took classes on it a few semesters ago but forgot some of the simple things already so you speaking out loud on each of your steps is very helpful!
I signed in just to say what a great job you did. I really liked the whole thing. You are fast, fluid, and I learned a lot. I am ok with solid works but this makes me want to be better. You are good! Thx for this video!
Fastest I have ever build anything on SolidWorks. Haha. I had no idea there was a curve driven pattern, and had not once used the coincident tool. Can't believe it.... Thank you!
That was impressive! I admire your fluid actions and rapid product build. It motovates me to aspire the level of expertise you have achived. That same design would have taken hours for me to struggle through. Please put up more tutorials & ocasionally give a reason for the particular sequence that you used. Most of it was repetition, and that was really easy to follow. Thank you again.
Nice video. You packed quite a bit in a fairly short video. Well done. I've been using CAD for many years but new to SWX. Video's like this are very helpful to get me exposed to the software features quickly.
I'm pretty new to solidworks. My question may be stupid. Why don't you revolve a more complicated profile instead of all those small steps to build the disk? Is it necessary for future design change?
Thanks a lot!..I have a comment..the ventilation holes, the big radial ones, are thru all body..means air is coming from center of disk to external side, in between the two disks...Very good anyway!.
thank you so much sir but is it possible for you to send me the link from where you have taken the specifications?? i need it badly and i know it is of audi but i need it in detail
quick question, how did you get all the dimension? did you design it yourself or is there a set of standard calculation and dimension for it? Thanks heaps
Hi there. Guys, at 5.18 i encountered problem i cannot deal with. SW will not allow me to specify full 360 rotation of the groove we made right before. It keeps saying "specify angle more than 0 degrees and less than 360 degrees" Can someone tell what i am doing wrong?
hey brother can u solve a little problem of mine being a new user iam not able to resolve the issue smart dimension is not giving me option to input my required dimention for example if draw a circle off 200 mm ,i would draw a circle and with the smart dim i will input 200 to make to the size but its not taking me there , all it does gives the actual size of entity and thts it could u solve my issue thanks or anyone else who has a solution fo this pls do respond
When I open solidworks, I can't see the bar that has the features, sketch, surfaces, etc. tabs. All I can see is the vertical box on the left side. How can I make it visible?
thank's your tutorial it's very good. would have been better, if ( "20 rim, brake disk and tire) were assembled. but no problem. congratulation. by Marco
![Introduction to Surface Modelling in SolidWorks [Webcast]](http://i.ytimg.com/vi/fA2-i34UVUo/mqdefault.jpg)
Man, this is one of the best tutorials I have ever watched. A bit too fast in my opinion, but at the same time you get a really nice object few really little time. Congratulations, I have enjoyed the result a lot. Cheers!
Thank you for these videos! I took classes on it a few semesters ago but forgot some of the simple things already so you speaking out loud on each of your steps is very helpful!
I signed in just to say what a great job you did. I really liked the whole thing. You are fast, fluid, and I learned a lot. I am ok with solid works but this makes me want to be better. You are good! Thx for this video!
Fastest I have ever build anything on SolidWorks. Haha. I had no idea there was a curve driven pattern, and had not once used the coincident tool. Can't believe it....
Thank you!
That was impressive! I admire your fluid actions and rapid product build. It motovates me to aspire the level of expertise you have achived. That same design would have taken hours for me to struggle through. Please put up more tutorials & ocasionally give a reason for the particular sequence that you used. Most of it was repetition, and that was really easy to follow. Thank you again.
Perfect. Fast, but understandable. No extra time wasting talk. Thanks.
Brilliant! Thank you! I have not used SolidWorks for over a year as I chose to do an industrial placement. Great Tutorial!
Thank you so much for this. You are really talented and deserve a lot my friend.
There aren't many things that id refer to as brilliant, but your video definitely is!
Thank you very much!!!
Nice video. You packed quite a bit in a fairly short video. Well done. I've been using CAD for many years but new to SWX. Video's like this are very helpful to get me exposed to the software features quickly.
very helpful... as a 3-rd day user understood it pretty well, thanks for tutorial !
klaus thank you!
You don't even think how much you helped me
Woow man... Great tutorial, I´m mexican and I could understand you in each step... Thanks !
Great video Klaus. I have definitely learned a lot from a few of your models.
Thanks for uploading. Nice tutorial to get me back into Solidworks again!
Thank you. The explanation was very clear. We want more ...
Great tutorial.. ..in many cases in the brake disc structure the cooling holes are machined through the disc.
Thanks so much for this tutorial! It was very well done and helpful!
I learned to much with your tutorial....thanks Klaus!
Very good guy I liked the commands used in the design.
So educative to someone like me, new stater... Thanks.
Great thanks for taking the time to create and share this tutorial video it is very informative and helpful.
Thank you very much!
(Simple way to improve audio, use Audacity's noise remover, it's great and takes a few seconds)
You do a great job Klaus. thank you!
Thanks a lot for a ton of ntresting tutorials. Love it!:-)
Thanks for your tutorial. Very good job. Even if it's a bit quickly we can always use "pause-play". :-D
This was a very good tutorial.
Thanks, My final is coming up and this was helpful.
Hi Mark, great tut, it helped me a lot... Good work, :)
Thank you Sir especially because of the commentary
great video. You might move a little fast, but I have a pause button.
I'm pretty new to solidworks. My question may be stupid. Why don't you revolve a more complicated profile instead of all those small steps to build the disk? Is it necessary for future design change?
Thanks for the tutorials they are really helpfull for me. Would it be possible to make a tutorial for something like a laptop?
very helpful, easy to follow. Thank you very much!
Muy buenos tus tutoriales, muchas gracias
thanks klaus, it's really helpful
Thank you very much, Richard.
I will post more tutorials in the nearest future.
Thanks a lot!..I have a comment..the ventilation holes, the big radial ones, are thru all body..means air is coming from center of disk to external side, in between the two disks...Very good anyway!.
Very helpful!..
if you could indicate the settings of your template. it will make easier to follow!
Beautiful tutorial.. Appreciate it.. !
Could you provide a link or video for aircraft disc brake tutorial
thank you this help me a lot
wow this help from machine blueprints. thank you
Thank you i got right time right explaination....good job.
May I get to know, what are the various configurations that is used to define the CURVED vane of disc brake rotor ?@Klaus Falk Hansen
great tutorial Kaus, Thanks!!!!
Cool can you show how make a caliper for that like the brembo style?
Great tut man!! Thanks a lot ;) !
thank you so much sir
but is it possible for you to send me the link from where you have taken the specifications??
i need it badly and i know it is of audi but i need it in detail
can you make a caliper for this brake disc?
Great tutorial! Can you make a tutorial of how to make a brake (to go with this brake-disc)
Your videos are very good. Thank you.
Well, it certainly looks pretty. Unfortunately I don't think you are too familiar with the actual point of the vents in a vented brake rotor...
sabotshell I
quick question, how did you get all the dimension? did you design it yourself or is there a set of standard calculation and dimension for it? Thanks heaps
can u do the fullset disc brake
Great video.
Will it fit on my Honda?
can you upload a video in solid cam with this brake disk??
Thank you for this tutorial ... although dimensions are also precise..
hey kalus can you say me on which automobile vehicles are these rotors mounted?
name of company vehicle and model please
good job man !
Hi there. Guys, at 5.18 i encountered problem i cannot deal with. SW will not allow me to specify full 360 rotation of the groove we made right before. It keeps saying "specify angle more than 0 degrees and less than 360 degrees" Can someone tell what i am doing wrong?
helped me a lot !
Saved my bacon. Thank you!
Hey,
had a doubt. Why do we use convert entities.?
how can i make a bomb of the brake? pleace help me.
if you do the thermal or static simulation. It would have helped me more..Waiting for that..Thank you
How you move the camera like that?? Thanks!
thanks dude. very handy
what solidworks is this?old version or newer?
thanks, great tutorial!
can you make a 50 Cal muzzel break tutorial?
Thanks a lot. It's helpful.
thank you, great video
hey brother
can u solve a little problem of mine
being a new user iam not able to resolve the issue
smart dimension is not giving me option to input my required dimention
for example if draw a circle off 200 mm ,i would draw a circle and with the smart dim i will input 200 to make to the size
but its not taking me there , all it does gives the actual size of entity and thts it
could u solve my issue
thanks
or anyone else who has a solution fo this pls do respond
This is the disc brake of which vehicle?
Thank you.
Yea i know that.
But i think the tutotrial easy gets to unmanageable to follow, by using to many short cuts etc.
hallo, can you send this file to me?
When I open solidworks, I can't see the bar that has the features, sketch, surfaces, etc. tabs. All I can see is the vertical box on the left side. How can I make it visible?
click the new button on the top line, then a dialogue window pop out, click part-ok, then you will see the features, sketch, surfaces, etc.
Thanks a lot!
Excellent video.....
Vary helpful but I wish if you could go a little bit slower in the future. Great job!!
very useful thankyou so much
I didn't find this drawing? Can you help me with drawing? Thanks in advance
You are a boss!
What dimensions have you used? Millimetres or inches?
MM
Hey can you post me a link of the site you got the dimensions from. That would be cool, also, nice video!
My revolved cut option is grayed out. I've spent 3 hours trying to get this to work
I searched this program and I don't found him free. Please, can you give me a link?
Amazing.
thank's your tutorial it's very good.
would have been better, if ( "20 rim, brake disk and tire) were assembled.
but no problem. congratulation.
by Marco
Very Nice. Thanks
I got the dimensions from an AUDI brake disk through a google search.
What model of an audi was that sir ?
Im glad to know that :)
Thank you - Gracias bien hecho - Merci et bien fait - Tanammirt - شكرا عمل رائع
has been applied
nice one mate :)
thank you man :)
muy bueno los tutoriales grancias por ayudarme
Exelent !!!!!
thanks for the tutorial but just fyi, the vents are supposed to go all the way to the centre of the disc. other wise they aren't doing anything.
Hi please knee Creating multi-piece set in the sheet metal Morsi
nice video