You prolly dont care at all but does anyone know of a trick to get back into an Instagram account? I somehow forgot my account password. I would love any assistance you can give me.
@Achilles Marcos i really appreciate your reply. I got to the site through google and im in the hacking process atm. I see it takes a while so I will get back to you later when my account password hopefully is recovered.
Great work Ryan - thanks! I really think the subtle differences could be much better heard with a clean (even dry) signal. The heavy distortion just seems to wash most of it out. Probably different if ur sitting right in front of ur studio speakers.
hallo. I’m new in Amplitube 5 world and I also would like to take a iRig Stomp I/O but it is disappeared on the markt. If I use a Tonex pedal can I also import my Amplitube presets on it? Thank you.
Thank you very much for this interesting video! I use Amplitube as plug-in in Cubase but I don’t know how make Amplitube to receive program change message from Cubase. Can you help me? Many thanks
I know this video is about a year old. One question - do you make any adjustments to either your Audio I/O interface gain or Amplitube 5 Input gain? I use the Axe IO as you do. The manual says to bring gain up until just before clipping when you are strumming at your hardest stroke. A couple other guides recommend keeping the gain at zero and instead adjust the input gain in Amplitube 5 until just before clip with hard strokes (one guide uses a sine wave generator, but that might be a bit anal). Either when the interface gain is set where the manual says or in Amplitube 5, I notice a lot of distortion even on cleaner sounding or set amps, and that is even with output volume in Amplitube 5 and on the Axe IO software set below clipping. I know that might seem a confusing question, a long way of asking how you do gain staging. For reference, I use a modified Dean Deceiver with the stock pickups switched out for Fraulin Modern PAF and the cheap stock pots switched out for better quality 500k volume and tone knobs (one each for the neck and bridge pickup). For my audio monitoring, I use either JBL 5" studio reference monitors in stereo from back of the Axe IO or Yamaha studio headphones from the front Axe IO port.
Thanks for the great question. It sounds like you've already done some research.There are a couple things I like to do when setting up to record. I always make sure to get a nice clean signal I'm happy with using my Interface's control (Z-TONE is especially useful for this when using AXE I/O like in the video) and maybe even the guitar's controls. Usually this setting depends on the riff, guitar, and amp choice. It is good to get the loudest signal possible before clipping, because later you can always turn that down in the box as long as it's nice and clean (without much noise). Of course adding gain in the box is a possible, but remember, you're then limited to the information that's been recorded already when raising the gain. Plus once recorded your guitar, you've maybe also recorded to some extent some noise. That noise may not be noticeable until you crank the gain on a quiet signal in the box. Really, you don't need to think to much, as long as you get a decent signal level into the DAW (I like to aim for a peak of -6dB to give myself some headroom), and you like the tone, you can go from there. All the knobs are there to be used :) Try them out and see what fits your needs. I can admit in cases it is useful once you have a good signal level to try adjusting the AmpliTube 5 input gain or output gain. They are great for fine tuning the signal level for the gear loaded and tone needed. For example, sometimes I'll use them to lower my guitar signal with the input gain to prevent a certain amp from breaking up at certain settings. -Ryan IK
Can you tell me why some combo amps are in the cab section, such as Fender 59 Bassman? Having them in the cab section makes it impossible to get to the control knobs on the amp. Thanks.
That's the cab/speaker from the combo only. You'll see the controls in the amp sectino of AmpliTube 5. This way you can swap speakers/cabs as you wish and still have the amp tone and its controls.
I've sorted out my interface etc but when I change my amp settings it doesn't change the tone or sound of my guitar, it only sounds like the regular preset of a guitar plugged in
Hi ITZDARKSKI VODS, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
I know this question is a year old and I have yet to buy it (literally in the process lol) but I've done a significant amount of research to avoid any potential problems when first downloading and using the software and one thing I have seen suggested on numerous occasions is to download the software control panel first before installing the software itself.
@@TOANhound I have no idea why it wouldn't launch. I was able to download S-Gear and had it up and working in no time at all... I would have thought they would be very similar in nature.
I'll tell you what buddy ol' boy......that AmpliTube 5 MAX has some sweet, sweet presets......like Amesterdam. But you didn't hear it from me. In fact don't upgrade to it...you don't want it.... because I want those sounds all to myself.
Hey there , cool video , one question I have and it's really an annoying problem is, why is it that whenever using amp sims , and a noise gate that, when I mute the strings with my hands it will engage the noise gate to close but like I can hear it go shhhrrlr when I let the strings ring out and die out it has so much sustain and then the hissing comes back andnoise gate close . It's super annoying because whenever I play the noise gate introduce noise in my recording everytime it closes. Is there a way I can fix this or something I'm doing wrong .?? Thanks in advance
The manual installs with AmpliTube 5 and is available in your IK User Area and IK Product Manager. If you can't find your manual, please check this FAQ for details www.ikmultimedia.com/faq/index.php?id=1395
Where to I get Custom Ir's ? Can I Make and Save My OWN IR's? How do I do this I Own Amplitube 5 Max and The Mesa Boogie Packs as well. Thank you for your help. Carl Ventis
I would be cool if you focused some more on gear that isn't specific to Amplitube 5 MAX. I use the SE because I already have a whole of of the gear through Amplitube 4 MAX.
Nice to hear of your new iRig and AmpliTube setup and thanks for the kind words! In this video, the external monitors in the setup are a pair of iLoud MTM.
i have a BIG question, ... using the focusrite scarlet with amplitube5 - i put the latency at the LOWEST(16) ,0,4ms gives me a overall altency about 5 ms . everything is eprfect . so if my PC ( its a beast) can handle this is loew latency alwys better ? or do i loose sound quality ? i can hear no difference , but in general ?
Make sure you're using the ASIO drivers with your Focusrite. Windows Audio (WASAPI) will work with AmpliTube 5 and I'm sure other applications, but performance may be hindered. WASAPI and Direct X are designed for video games or movies and not real-time audio processing. If this doesn't help, check with our support team. We'd be happy to help get you the best possible results. www.ikmultimedia.com/contact-support/sw/
@@ikmultimedia i solved the problem , everything fine with Pc and software /interface . The Neck of my 27 years old fender was "loose" . the sound had no sustain at all. now everything is fine. but thank you very much for answering and helping ! thanks alot !
How does one uninstall amplitube 4 to save space when we have amplitube 5? I can't find any info on this and the product manager doesn't have this option. Cheers!
Hi @mfconstructor, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
@@ikmultimediathank u , yesterday doing a little search, I found that you have to “uncheck “ the “open as administrador “ on the app in windows. To eliminate the blue and yellow shield for “open as administrador “ function. And give it all the permissions in properties , after doing that it all worked
Hi Peter Yang, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
I hear my guitar playing clean through windows on top of amplitude. How do I remove the clean notes ( the same sound you hear just plugging into your interface and playing in windows)
I'm new to amplitube, and I have two questions. First, I'm using the free version and I cannot find the presets, is it true they are disabled in the free version? Second, how do you control the db in pro tools so when your recording your not topping out in the red
While there are of course more presets in say AmpliTube 5 MAX, AmpliTube 5 CS should still have a nice collection of Presets. If you're having any trouble finding them, please contact our support team (www.ikmultimedia.com/contact-support/sw). For your Pro Tools question, first I would suggest adjusting your gear levels. Make sure you're not incidentally cranking the signal to clipping anywhere on your interface or in the individual gear models in AmpliTube 5. Once you're sure everything is set as you'd like it, you can further adjust your Input and Output levels at the bottom of the Plug-in for fine-tuning. Hope this helps! --Ryan IK
I am completely new to Amplitude. HOw does the amp and Cab work with say a 65 Fender Twin where amp and cab are matched. I can't seem to understand how they handle Matched Cabs. Thoughts?
I’m thinking about buying one of these packages IK Multimedia Axe I/O + AmpliTube 5 Max Bundle maybe some monitor speakers too but I read that the amp four had to have a mini controller to work with the preset button so has that changed an amp five or would I have to buy a midi controller I’m not really up on MIDI controllers I have a couple of Korg synths don’t those work as my midi controllers if I need one I have a kross 61 I could use or Triton 76 extreme
AXE I/O has two dedicated controller inputs let you connect up to two expression pedals or two single/double switches to control AmpliTube, or any other software, in real-time while playing. With AmpliTube’s MIDI Learn function, just right-click on any parameter you want to control, move the pedal, and it’s assigned. You can do up to 6 different controller configurations with AXE I/O, mixing pedals and switches, to suit your needs.
@@ikmultimedia OK I think I understand now the Midi control and a the foot switch acts as a assignor switch. But without that you have to do it on your computer with your mouse or keyboard. is that how it works. It would be cool to see you guys do a video on this because I’m sure there’s a lot more people besides me curious. Technology changes so fast a lot of us like 5 to 10 simple things instead of trying to remember 500 other things if you know what I mean. I listen to some other products that were supposed to be good but I was surprised they didn’t have the natural guitar amplifier tone the way yours does and the fact that I can pump it back out to the amp and basically jam live to me that was a big part so I’m probably ordering it today. Maybe within a month I’ll have some video on my Instagram demonstrating some capabilities. I love tinkering with the stuff. I’m trying to come up with basically a killer home studio design picking up new and used things etc. and having a major set up for under $1000 that’s without my instruments and computer. Then I came up with some better ideas on unknown musicians how they could market their stuff better by using well-known musicians. Because a few people were discussing sometimes a person writes a great song but it goes nowhere because they’re totally unknown and their marketing was not enough. I like your gear and your software because it’s the kind of stuff that you can just look at it and have a guitar and you don’t have to read three months worth of help files you know how everything functions or what to expect. Thanks for the quick reply on this. Everything I have seen on your product looks great and when I seen Pete Thorne playing with it I was excited about it, he’s sort of my channel I turn to when I want to hear about great tone or technical stuff. I’m hoping I can start up sort of my own guitar magazine online with articles talking about this stuff. Between TH-cam and Instagram I’ve come across some of the greatest musicians in the world. I love tinkering with all this stuff. I think the next step in the industry is we start seeing robust computers designed specifically for musicians
I plug the AXE I/O SOLO into my Mac... it disconnects every 2-30 seconds. It fully loses connection with the interface, from the Sys Prefs Audio pane, it actually disappears for a second or two from the list of available sources. Can anyone help? Works fine on PC.
Hi theonlyegg, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
Can someone tell me... what's the point of a two-track looper if none can be stopped with either a footswitch or a keyboard????? Guys i'm looking for some simple LOOPER App for Windows PC with two or more track smth like Quantiloop... Witch is actually working...
bro I'm having the hardest time just trying to get my amp sim to work. No one touches on this and I am a total newb when it comes to amp sims or recording softwares in general. How do I even get sound to come out of my amp sim? It doesn't make sound at all, I am just getting the clean guitar sound I get when I plug into my focusrite scarlett solo 3rd gen through my computer
Did you get it working? I had a similar problem. I had Amplitube up in standalone, and it was working. I experimented a bit with stuff, then it stopped, and like you I only got the clean signal from my guitar. I had to restart it, and then it worked.
@@ikmultimedia Great. Please point me to a beginner video on Amplitube UA. I can't find one on this channel. They're all over me head. Currently, the app doesn't seem to see my iRig2. Thanks.
Hello, very curious about the software .....can I have this loaded on my desktop and my laptop at the same time with a single license/account ? and can I run this directly from my Interface and laptop to a powered speaker cab ?
Yes you can run it on both, just not simultaneously. You can also use an audio interface, your laptop, and a powered speaker if your interface will output to that powered speaker (which any proper audio interface should).
Hi, how do I change presets in Amplitube 5 using the buttons on my midi controller keyboard, for example from a clean to a distorted sound, or one saved present to another, or switching a delay pedal on and off etc? Is this possible? I am using Cubase.
Hi, you can use MIDI messages to control AmpliTube 5 in the ways your describe. The MIDI implementation is detailed in the AmpliTube 5 User Manual. Thank you.
You can find it in your IK Product Manager, IK User Area, and it is also installed with AmpliTube 5. Here is the FAQ about where IK manuals can be found www.ikmultimedia.com/faq/index.php?id=1395
Sorry to hear you are having a problem. I'm not sure what would cause this but the IK Support team would be happy to provide direct and official technical support to help resolve your issue. They can be reached at www.ikmultimedia.com/contact-support Thank you.
We have done a couple different Live Streams on T-RackS 5, but we'd love to do another for you. What specifics about mixing are you looking for? I'll make sure the team gets your full comment. Check out this on in the meantime. th-cam.com/video/LqdBIIZQOco/w-d-xo.html
@@ikmultimedia Thank You 🙏🏽 I would like if you can make a Hip Hop instrumental mix, please that would be great, and also how to master it. I have been a long time user since T-Rex. I can’t wait to see it.
We have google, lol. Clicking that reverses the polarity, AKA puts it out-of-phase in relation to another mic/track/other audio source that was in phase before, and vice versa. If you don't know what phasing is, then you'd have to learn about that first.
I had to get the whole shabang! Amplitube 5 Max.... so glad I did. The amps and effects sound awesome!
@jade marks yes if you want to listen to Amplitube through some speakers. You’ll need some powers monitors to connect to your audio interface
Would really appreciate a quick start from the absolute beginning.
Thats what I'm looking for too.. pretty annoying they don't have a basic beginners guide
Thank you for explaining how Dimebag used the Flanger Doubler with slight delay to create the sound of two guitars!! Man I've been looking for this!
You prolly dont care at all but does anyone know of a trick to get back into an Instagram account?
I somehow forgot my account password. I would love any assistance you can give me.
@Leroy Beckett Instablaster ;)
@Achilles Marcos i really appreciate your reply. I got to the site through google and im in the hacking process atm.
I see it takes a while so I will get back to you later when my account password hopefully is recovered.
@Achilles Marcos It worked and I finally got access to my account again. I'm so happy:D
Thank you so much you saved my account !
@Leroy Beckett Glad I could help :)
Great work Ryan - thanks! I really think the subtle differences could be much better heard with a clean (even dry) signal. The heavy distortion just seems to wash most of it out. Probably different if ur sitting right in front of ur studio speakers.
Just bought AXE I/O and Amplitube 5 Max it's awesome. Can you do more in depth tutorials especially on setting up Live Mode.
Like all of it, just purchased the SE version, wouldn't mind the full version 😀 Great Channel!!
The $99 version is more than plenty of sims. Cheers
Completely unreal. I love Amplitube.
Thanks for the demo!
when is amplitube 5 coming to ipad/iphone ?
"Today we're going to be messing with metal mostly... " YAAAY!!
Need help... Electric guitar to input audio mixer soundcraft 8fx usb to laptop... Question is will amplitude work? Thanks...
hallo. I’m new in Amplitube 5 world and I also would like to take a iRig Stomp I/O but it is disappeared on the markt. If I use a Tonex pedal can I also import my Amplitube presets on it? Thank you.
I have focusrite solo and an iPad. How do I et Amplitube to work. I installed it but no sound.
Thank you very much for this interesting video! I use Amplitube as plug-in in Cubase but I don’t know how make Amplitube to receive program change message from Cubase. Can you help me? Many thanks
Can I connect to amplitube 5 through a USB Guitar ? Or I need to connect to a soundcard to do that
I know this video is about a year old. One question - do you make any adjustments to either your Audio I/O interface gain or Amplitube 5 Input gain? I use the Axe IO as you do. The manual says to bring gain up until just before clipping when you are strumming at your hardest stroke. A couple other guides recommend keeping the gain at zero and instead adjust the input gain in Amplitube 5 until just before clip with hard strokes (one guide uses a sine wave generator, but that might be a bit anal). Either when the interface gain is set where the manual says or in Amplitube 5, I notice a lot of distortion even on cleaner sounding or set amps, and that is even with output volume in Amplitube 5 and on the Axe IO software set below clipping.
I know that might seem a confusing question, a long way of asking how you do gain staging. For reference, I use a modified Dean Deceiver with the stock pickups switched out for Fraulin Modern PAF and the cheap stock pots switched out for better quality 500k volume and tone knobs (one each for the neck and bridge pickup). For my audio monitoring, I use either JBL 5" studio reference monitors in stereo from back of the Axe IO or Yamaha studio headphones from the front Axe IO port.
Thanks for the great question. It sounds like you've already done some research.There are a couple things I like to do when setting up to record. I always make sure to get a nice clean signal I'm happy with using my Interface's control (Z-TONE is especially useful for this when using AXE I/O like in the video) and maybe even the guitar's controls. Usually this setting depends on the riff, guitar, and amp choice. It is good to get the loudest signal possible before clipping, because later you can always turn that down in the box as long as it's nice and clean (without much noise). Of course adding gain in the box is a possible, but remember, you're then limited to the information that's been recorded already when raising the gain. Plus once recorded your guitar, you've maybe also recorded to some extent some noise. That noise may not be noticeable until you crank the gain on a quiet signal in the box. Really, you don't need to think to much, as long as you get a decent signal level into the DAW (I like to aim for a peak of -6dB to give myself some headroom), and you like the tone, you can go from there. All the knobs are there to be used :) Try them out and see what fits your needs. I can admit in cases it is useful once you have a good signal level to try adjusting the AmpliTube 5 input gain or output gain. They are great for fine tuning the signal level for the gear loaded and tone needed. For example, sometimes I'll use them to lower my guitar signal with the input gain to prevent a certain amp from breaking up at certain settings. -Ryan IK
@@ikmultimedia awesome rundown, and great customer service. I’ll try all that out!
Can you tell me why some combo amps are in the cab section, such as Fender 59 Bassman? Having them in the cab section makes it impossible to get to the control knobs on the amp. Thanks.
That's the cab/speaker from the combo only. You'll see the controls in the amp sectino of AmpliTube 5. This way you can swap speakers/cabs as you wish and still have the amp tone and its controls.
Can I route the metronome to just my headphones? And how?
good video my friend!
Brilliant demo. Very well explained.
Really cool video! Is there a walk-through or tutorial for bass amps and tones within Amplitube 5?
sure it do
HELLO ! Can I use the loop effect in the soft to run external stomp modulation and time based effects ?
What setting do you have on the harmonizer at 34 min mark?
How do I get the virtual stuff on my screen so I can use it
I've sorted out my interface etc but when I change my amp settings it doesn't change the tone or sound of my guitar, it only sounds like the regular preset of a guitar plugged in
Hi ITZDARKSKI VODS, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
I’ve downloaded AmpliTube 5. Now how do I open it and use it?
I know this question is a year old and I have yet to buy it (literally in the process lol) but I've done a significant amount of research to avoid any potential problems when first downloading and using the software and one thing I have seen suggested on numerous occasions is to download the software control panel first before installing the software itself.
Having the exact same problem. I've been researching for three days and cannot figure how to open the software after having downloaded it.
Can’t you just search for ‘Amplitube’ on your computer and launch that way? I installed it in on a Mac and the launcher was right there in Launchpad.
@@TOANhound I have no idea why it wouldn't launch. I was able to download S-Gear and had it up and working in no time at all... I would have thought they would be very similar in nature.
I'll tell you what buddy ol' boy......that AmpliTube 5 MAX has some sweet, sweet presets......like Amesterdam. But you didn't hear it from me. In fact don't upgrade to it...you don't want it.... because I want those sounds all to myself.
@ikmultimedia I just upgraded to Amplitube 5 Max and I can't find that preset 'Stereo Rock Rig' - has it been removed or named something else?
Hey there , cool video , one question I have and it's really an annoying problem is, why is it that whenever using amp sims , and a noise gate that, when I mute the strings with my hands it will engage the noise gate to close but like I can hear it go shhhrrlr when I let the strings ring out and die out it has so much sustain and then the hissing comes back andnoise gate close .
It's super annoying because whenever I play the noise gate introduce noise in my recording everytime it closes.
Is there a way I can fix this or something I'm doing wrong .??
Thanks in advance
Where can I find the manual?! I've bought the full product and no sign of the user manual!
The manual installs with AmpliTube 5 and is available in your IK User Area and IK Product Manager. If you can't find your manual, please check this FAQ for details www.ikmultimedia.com/faq/index.php?id=1395
All I want to do is add wav files to the app and practice along. There has to be a way to do this easily like in earlier versions.
You can just drag them in to the recorder section.
Where to I get Custom Ir's ? Can I Make and Save My OWN IR's? How do I do this I Own Amplitube 5 Max and The Mesa Boogie Packs as well. Thank you for your help. Carl Ventis
First i was using other vst, now i discovered real music.
So I just downloaded Amplitube 5 and for some reason it doesn't say that it's installed even though I just installed it, am I doing something wrong?
I would be cool if you focused some more on gear that isn't specific to Amplitube 5 MAX. I use the SE because I already have a whole of of the gear through Amplitube 4 MAX.
Just started with Amplitude and iRig pro. What external speaker are you using? It sounds incredible.
Nice to hear of your new iRig and AmpliTube setup and thanks for the kind words! In this video, the external monitors in the setup are a pair of iLoud MTM.
i have a BIG question, ... using the focusrite scarlet with amplitube5 - i put the latency at the LOWEST(16) ,0,4ms gives me a overall altency about 5 ms . everything is eprfect . so if my PC ( its a beast) can handle this is loew latency alwys better ? or do i loose sound quality ? i can hear no difference , but in general ?
Make sure you're using the ASIO drivers with your Focusrite. Windows Audio (WASAPI) will work with AmpliTube 5 and I'm sure other applications, but performance may be hindered. WASAPI and Direct X are designed for video games or movies and not real-time audio processing.
If this doesn't help, check with our support team. We'd be happy to help get you the best possible results.
www.ikmultimedia.com/contact-support/sw/
@@ikmultimedia i solved the problem , everything fine with Pc and software /interface . The Neck of my 27 years old fender was "loose" . the sound had no sustain at all. now everything is fine.
but thank you very much for answering and helping ! thanks alot !
You're welcome! Glad it was sorted in the end.
How does one uninstall amplitube 4 to save space when we have amplitube 5? I can't find any info on this and the product manager doesn't have this option. Cheers!
Why is it that I can’t drop a Wav file in amplitude 5 for recording ? I have a Wav drum file but it doesn’t let me drop it as a track
Hi @mfconstructor, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
@@ikmultimediathank u , yesterday doing a little search, I found that you have to “uncheck “ the “open as administrador “ on the app in windows. To eliminate the blue and yellow shield for “open as administrador “ function. And give it all the permissions in properties , after doing that it all worked
is it possible improve PDC to zero in Reaper? can it fix "pop" sound when switch preset in daw?
I download but I can't be able to play it, why? I just downloaded the Amplitude alone without software multi tracks.
Hi Peter Yang, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
I hear my guitar playing clean through windows on top of amplitude. How do I remove the clean notes ( the same sound you hear just plugging into your interface and playing in windows)
Sounds like you might have direct monitoring turned on in your audio interface control panel (and/or in your DAW if you are using the plugin version).
how to add backtrack to the track?
I'm new to amplitube, and I have two questions. First, I'm using the free version and I cannot find the presets, is it true they are disabled in the free version? Second, how do you control the db in pro tools so when your recording your not topping out in the red
While there are of course more presets in say AmpliTube 5 MAX, AmpliTube 5 CS should still have a nice collection of Presets. If you're having any trouble finding them, please contact our support team (www.ikmultimedia.com/contact-support/sw). For your Pro Tools question, first I would suggest adjusting your gear levels. Make sure you're not incidentally cranking the signal to clipping anywhere on your interface or in the individual gear models in AmpliTube 5. Once you're sure everything is set as you'd like it, you can further adjust your Input and Output levels at the bottom of the Plug-in for fine-tuning. Hope this helps! --Ryan IK
can I import the presets created with amplitube, on the boss me 25 pedal board?
if so how?
I am completely new to Amplitude. HOw does the amp and Cab work with say a 65 Fender Twin where amp and cab are matched. I can't seem to understand how they handle Matched Cabs. Thoughts?
How to use backing track?
I’m thinking about buying one of these packages IK Multimedia Axe I/O + AmpliTube 5 Max Bundle maybe some monitor speakers too but I read that the amp four had to have a mini controller to work with the preset button so has that changed an amp five or would I have to buy a midi controller I’m not really up on MIDI controllers I have a couple of Korg synths don’t those work as my midi controllers if I need one I have a kross 61 I could use or Triton 76 extreme
AXE I/O has two dedicated controller inputs let you connect up to two expression pedals or two single/double switches to control AmpliTube, or any other software, in real-time while playing. With AmpliTube’s MIDI Learn function, just right-click on any parameter you want to control, move the pedal, and it’s assigned. You can do up to 6 different controller configurations with AXE I/O, mixing pedals and switches, to suit your needs.
@@ikmultimedia OK I think I understand now the Midi control and a the foot switch acts as a assignor switch. But without that you have to do it on your computer with your mouse or keyboard. is that how it works. It would be cool to see you guys do a video on this because I’m sure there’s a lot more people besides me curious. Technology changes so fast a lot of us like 5 to 10 simple things instead of trying to remember 500 other things if you know what I mean. I listen to some other products that were supposed to be good but I was surprised they didn’t have the natural guitar amplifier tone the way yours does and the fact that I can pump it back out to the amp and basically jam live to me that was a big part so I’m probably ordering it today. Maybe within a month I’ll have some video on my Instagram demonstrating some capabilities. I love tinkering with the stuff. I’m trying to come up with basically a killer home studio design picking up new and used things etc. and having a major set up for under $1000 that’s without my instruments and computer.
Then I came up with some better ideas on unknown musicians how they could market their stuff better by using well-known musicians. Because a few people were discussing sometimes a person writes a great song but it goes nowhere because they’re totally unknown and their marketing was not enough. I like your gear and your software because it’s the kind of stuff that you can just look at it and have a guitar and you don’t have to read three months worth of help files you know how everything functions or what to expect.
Thanks for the quick reply on this. Everything I have seen on your product looks great and when I seen Pete Thorne playing with it I was excited about it, he’s sort of my channel I turn to when I want to hear about great tone or technical stuff. I’m hoping I can start up sort of my own guitar magazine online with articles talking about this stuff. Between TH-cam and Instagram I’ve come across some of the greatest musicians in the world. I love tinkering with all this stuff. I think the next step in the industry is we start seeing robust computers designed specifically for musicians
not able to change pitch of a song like in AMP4 . any idea ?
Thanks.Does the 5.3 version include Mesa Boogie expansion?
AmpliTube MESA/Boogie 2 is an add-on collection available for purchase www.ikmultimedia.com/products/mesa2
I plug the AXE I/O SOLO into my Mac... it disconnects every 2-30 seconds. It fully loses connection with the interface, from the Sys Prefs Audio pane, it actually disappears for a second or two from the list of available sources. Can anyone help? Works fine on PC.
Hi theonlyegg, I'm sorry to hear you are having trouble. Our IK Support team can assist you via www.ikmultimedia.com/contact-support - simply search the FAQ there and if you don't find the answer there will be a button to open a ticket directly to our helpful techs! Thank you.
Can someone tell me... what's the point of a two-track looper if none can be stopped with either a footswitch or a keyboard?????
Guys i'm looking for some simple LOOPER App for Windows PC with two or more track smth like Quantiloop... Witch is actually working...
You can assign MIDI to the Looper functions in the Settings -> Control -> Control Change -> Global section
bro I'm having the hardest time just trying to get my amp sim to work. No one touches on this and I am a total newb when it comes to amp sims or recording softwares in general.
How do I even get sound to come out of my amp sim? It doesn't make sound at all, I am just getting the clean guitar sound I get when I plug into my focusrite scarlett solo 3rd gen through my computer
Did you get it working? I had a similar problem. I had Amplitube up in standalone, and it was working. I experimented a bit with stuff, then it stopped, and like you I only got the clean signal from my guitar. I had to restart it, and then it worked.
Join the Facebook group called 'Amplitube knowledge and preset Sharing' I'm a member and it's best place for help and advice for this software 👍
@@danielcotton7707 Thanks, I joined.
Can you record in Amplitube?
Yes you can!
@@ikmultimedia Great. Please point me to a beginner video on Amplitube UA. I can't find one on this channel. They're all over me head. Currently, the app doesn't seem to see my iRig2. Thanks.
Hello, very curious about the software .....can I have this loaded on my desktop and my laptop at the same time with a single license/account ?
and can I run this directly from my Interface and laptop to a powered speaker cab ?
Yes you can run it on both, just not simultaneously. You can also use an audio interface, your laptop, and a powered speaker if your interface will output to that powered speaker (which any proper audio interface should).
@@ikmultimedia awesome, thank you so much
Hi, how do I change presets in Amplitube 5 using the buttons on my midi controller keyboard, for example from a clean to a distorted sound, or one saved present to another, or switching a delay pedal on and off etc? Is this possible? I am using Cubase.
Hi, you can use MIDI messages to control AmpliTube 5 in the ways your describe. The MIDI implementation is detailed in the AmpliTube 5 User Manual. Thank you.
@@ikmultimedia Hi, thanks for your reply. Where can I find the AmpliTube 5 user manual?
You can find it in your IK Product Manager, IK User Area, and it is also installed with AmpliTube 5. Here is the FAQ about where IK manuals can be found www.ikmultimedia.com/faq/index.php?id=1395
How to edit the live mode? I mean How to make custom preset?
I'm having a problem with screen size. Product manager is way too big for my screen. How can I fix this?
Sorry to hear you are having a problem. I'm not sure what would cause this but the IK Support team would be happy to provide direct and official technical support to help resolve your issue. They can be reached at www.ikmultimedia.com/contact-support
Thank you.
@@ikmultimedia Submitted request, waitting for reply.
Can you do a video on T Racks 5? Something on mixing and mastering, Please?
We have done a couple different Live Streams on T-RackS 5, but we'd love to do another for you. What specifics about mixing are you looking for? I'll make sure the team gets your full comment. Check out this on in the meantime. th-cam.com/video/LqdBIIZQOco/w-d-xo.html
@@ikmultimedia Thank You 🙏🏽 I would like if you can make a Hip Hop instrumental mix, please that would be great, and also how to master it. I have been a long time user since T-Rex. I can’t wait to see it.
What if your at 2040 and your latency is still terrible. I'm using a Rocksmith cords which could be the problem
You would want to use an audio interface that is more capable of lower latency performance, yes.
24:07 - all these years and i still dont know what that little circle with a dash on it does just under the single button.
We have google, lol. Clicking that reverses the polarity, AKA puts it out-of-phase in relation to another mic/track/other audio source that was in phase before, and vice versa. If you don't know what phasing is, then you'd have to learn about that first.
spinetingler13 and I really like the Soldano SL 100
Is there some sort of tutorial to just get the damned thing to play? I can'[t get any sound
1:52