God has said in the Quran: { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) Quran
... молодец!-, отличный получился у тебя вибратор, буду себе такой-же делать, летом буду заливать фундамент своего дома, здоровья тебе и удачи во всём, новых творческих успехов!!!
@@tezzah2222 I don't think any woman would put this anywhere near their sensitive bits.. unless it had a silicon sleeve/padding for the end/tip. Even with that, it's still probably just too much to handle for 99.9999% of women. I wont lie though, I had the same thought lol.
Parabéns. Vídeo excelente. Excelente explicação. Vai ajuda muito os pedreiros, autônomo . Na hora de concretar pilar e vigas Dando um acabamento perfeito . Mais aderência do concreto ,no ferro. Na massa do concreto é bom de usar rebotec. Pois ajuda muito na impermeabilização do concreto,contra umidade do solo.. Obrs usamos o rebotec na massa. Ficou perfeito. Não passa umidade na viga. Vale apena comprar.
Great idea and build! Very functional. I'm confused on one part, why at 1:15 did you weld on the threaded half nipple to the pipe? Why did you not just cut the pipe that much longer and thread the end? Did I miss something? Thanks!
@@pro__moto5403 Прям знал, что найду такой комментарий. С заказчиком(девкой) шлялись по строймаркету, она такая: А что это и зачем? Ну я возьми и ляпни про погружные вибраторы. Стоит, мордашка красная. А стяжку вибрировать будет надо и фундамент под хозпостройки тоже. И спросил: держала в руках такой? Пользоваться умеешь?
Nice build! It has one big advantage over factory units: you can control the speed and with that the intensity of the vibration. Can be useful if you have to be careful not to demolish the concrete form.
Nice build. I've got an old Porter Cable belt sander that I'm going to modify and build into one of those sanders. It's such a great tool. I'm currently building a small version of a concrete vibrator for small moulds - sculpture and restoring vintage stairs with complex forms/tight spaces. Too many DIYers and even contractors skip that part of the process, and things fail after a new upper Midwest winters because of it. My neighbor spent $5K on a new set of front steps, which already have cracks and failures. It was totally avoidable. Sad.
Very Ingenious and Cool. Apart from the lathe, you made it with all the tools the everyday man would own (welder inc). I would love to have a lathe and milling machine, but don't have the space, nor the funds, to do so. I have subscribed to your channel for 2 reasons. 1, You made something very useful and cool and 2, you more or less made it with the tools I own. Thank You ! :-)
If you ever find the space and money - get a mill first! It's very easy to do basic lathe work on a mill but much harder to do basic mill work on a lathe in my experience.
Nice design but how does it actually work? I made a similar one but found that the drill speed was to slow to be effective. Concrete vibrator run on much higher RPM's. Would love to see it in action.
Is it still working. The wire rope has counter clockwise twist, and driving it clockwise will untwist it. How many hours of real concrete vibrating has this tool done?
You earned the subscribe! Awesome to watch this build. I'm wanting to make a walk behind compactor in the next year or two. Jack hammer too... so I don't think I'd use a jumping jack tamper/compactor though the thought has crossed my mind. Completely different... though this vibrator is more like the walk behind plate compactor. Really neat to see this design and construction. Thanks for sharing!
Maravilloso desafío de Sabiduría, Dios bendiga su Vida y Familia, y muchas gracias por compartir su creación técnica para todos nosotros en el área de construcción y otros servicios.
*Friends support the channel with a subscription, there will be a lot of interesting things*
8
Man, you are handy! 🤙🏼
God has said in the Quran:
{ O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
[He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
Quran
Ok
문형택Ŕŕrŕrŕrŕŕŕ
Thank you, I made one for my wife, she sends thanks!
😀😀😀
Hope it's not made you redundant.....
С размером не ошибся?
😂😂😂
Legends knows
... молодец!-, отличный получился у тебя вибратор, буду себе такой-же делать, летом буду заливать фундамент своего дома, здоровья тебе и удачи во всём, новых творческих успехов!!!
А можно не заниматься херней, а купит в леруа мерлен заводской.
и не приваривать кусок трубы с резьбой, а нарезать резьбу на целиковой трубе.)))
а можно просто взять в аренду качественный заводской и не изобретать велосипед.
@@BamBamov Тоже хороший вариант. Если есть где.
Кто скажет что за шланг используется? РВД или что-то другое? Размеры хочу узнать
Браво!!! Для дома лучше и не придумать.Классное видео! Спасибо!
Excellent job! This concrete vibrator is a perfect size for concrete counter tops, fence post and deck footings and much more.
Thanks
@@Mr.Craftsman Don't show your wife!
@@tezzah2222 I don't think any woman would put this anywhere near their sensitive bits.. unless it had a silicon sleeve/padding for the end/tip. Even with that, it's still probably just too much to handle for 99.9999% of women. I wont lie though, I had the same thought lol.
@@dojostarfox4520 you've obviously give it a test run by the sounds of it LOL
Tout.compri.il.faut.le.materilles.qui.coutte..pour.fair.une.guadjette😅
Parabéns.
Vídeo excelente.
Excelente explicação.
Vai ajuda muito os pedreiros, autônomo .
Na hora de concretar pilar e vigas
Dando um acabamento perfeito .
Mais aderência do concreto ,no ferro.
Na massa do concreto é bom de usar rebotec.
Pois ajuda muito na impermeabilização do concreto,contra umidade do solo..
Obrs usamos o rebotec na massa.
Ficou perfeito.
Não passa umidade na viga.
Vale apena comprar.
Veri veri naic and super
I love the design. Simple , practical, and very useful for the DIY guys. Will take me sometime to make it but it will be fun to try. Thanks.
Y corta para luego soldar !!!! Vaya que si esta bien pendejo !!!!
Great idea and build! Very functional. I'm confused on one part, why at 1:15 did you weld on the threaded half nipple to the pipe? Why did you not just cut the pipe that much longer and thread the end? Did I miss something? Thanks!
the welded pipe is slightly larger to accept the bearing, i think
That was my thought also.
because he did not have a pipe threading machine. But you can buy those nipples from the store.
Very good. I will try it too. What thickness cable?
Супер. Автору милион лайков ,спасибо за урок!!!!
Скажите, зачем эта штука нужна? Ну и еще мне интересно чему вы научились из этого видео?
@@povorotnetuda2019 К примеру из бетона выбить воздух. Или эпоксидку утрясти
@@alexeiexe ИЛИ ЖЕНУ ПОРАДОВАТЬ СУМАСШЕДШИМ ОРГАЗМОМ.
@@pro__moto5403 Прям знал, что найду такой комментарий. С заказчиком(девкой) шлялись по строймаркету, она такая: А что это и зачем? Ну я возьми и ляпни про погружные вибраторы. Стоит, мордашка красная. А стяжку вибрировать будет надо и фундамент под хозпостройки тоже. И спросил: держала в руках такой? Пользоваться умеешь?
Nice build! It has one big advantage over factory units: you can control the speed and with that the intensity of the vibration. Can be useful if you have to be careful not to demolish the concrete form.
Interesting. Don't they make them with variable speed?
Whoever this Concrete woman is, she's in for an fun time....
Gonna need some extra batteries too
!!!!!yes!!!!
"О да"-сказала она, уведев его, с этим в руках. 😂😂
Ha! I was thinking the same thing.
Im here for the comments as soon as i saw this title!
Can be use for multipurpose
Действительно и неважно на каком языке говорит мастер,сделал молча чётко,мнебы на стройке пригодился.
Так мастер говорит на русском..это видео с канала Техас тв
"Если вибратор не лезет в опалубку" - гугли. Они там слегка сдурели, но метод ебать стены перфоратором - рабочий.
Ненадо некаких коментов. Отличное муз сопровождение. Для технаря четко и ясно. Молодец мужик. А для оргазма у ее жены есть свой пальцы🤔😁😂
Nice build. I've got an old Porter Cable belt sander that I'm going to modify and build into one of those sanders. It's such a great tool.
I'm currently building a small version of a concrete vibrator for small moulds - sculpture and restoring vintage stairs with complex forms/tight spaces.
Too many DIYers and even contractors skip that part of the process, and things fail after a new upper Midwest winters because of it.
My neighbor spent $5K on a new set of front steps, which already have cracks and failures. It was totally avoidable. Sad.
Very Ingenious and Cool. Apart from the lathe, you made it with all the tools the everyday man would own (welder inc). I would love to have a lathe and milling machine, but don't have the space, nor the funds, to do so. I have subscribed to your channel for 2 reasons. 1, You made something very useful and cool and 2, you more or less made it with the tools I own. Thank You ! :-)
If you ever find the space and money - get a mill first!
It's very easy to do basic lathe work on a mill but much harder to do basic mill work on a lathe in my experience.
My wife loves this, thank you
Amazing idea my friend 👏👏
thanks, my wife will be very pleased with this
Really nice job, very well thought out and engineered
very nice idea thanks for sharing this video
Good. But two points need to be done differently. Place the cable mounting screws on the thread retainer. Use a dense lubricant for the cable.
Something in TH-cam works! Very nice job!!!
Would have been great to see it working in concrete, like 1 slump!
can this be use for vibrating wall or ceiling?
Ficou show de bola topdlinha, com certeza vo fazer um
Tô nessa msm visão porém com um mangote maior
Beautiful build ... can't do it though as l lack a lathe -- 😟
How does the vibration work? Is anything touching the tube inside ?
Отличная работа.
Great job.
Last one I rented 4 yrs ago cost me 60.00 for 24 hrs. Great I make one for my next poor. Much thanks.
Bom dia ficou muito bom parabéns pelo o seu trabalho 👍👏
Ladies, this is not a toy.
What's it like in the concrete? does it do the job?
Fue uno de los mejores videos que pude ver me gustó mucho lástima que sea en inglés y no en español
Very creative, can this really mix concrete? =
Good Video, but Fail at 6:27 : Missing Srcew Safety with Glue oder welding, THE SCREWS WILL LOSSE VERY QUICKLY
You are a genius . BRAVO !!!
Excelente amigo
Your job is 👍👍 great
Wonderful skill to put together all this! great project, congrats!
Production cost क्या होगी। Readymade तरह का क्या market मे मिल जयाऐगा। Tks
calm down ladies, its for concrete.
=))))))))
Hahaha..nice for the LGBT.
😂😂
🤣👍
But it doesn't HAVE to be.
Well done excellent job
Surprising no ladies in the comments section. Silent watchers. By the way machine seems to be heavy duty.
I can "hear" them on the background though...."Oohhh...ahhh..that's a big one!
Хорошая работа! Спасибо за идею.
Wife will be happy
Uno alante otro atrás y estallara en squirts
Wife will be happy with a gas powered industrial version
my wife loves it! thanks!
I made one of these and my gf uses it more than I do. Pretty odd that she has so much concrete to vibrate...
Went looking for this
Well now she doesn’t need you to do the work. Just be careful and don’t get drunk and pass out. She just might try it in your post hole.
Nice design but how does it actually work? I made a similar one but found that the drill speed was to slow to be effective. Concrete vibrator run on much higher RPM's. Would love to see it in action.
THANK YOU, THANK YOU, THANK YOU!!
Muy útil. Gracias por publicar.
great,,, its the off-set on the iron which does the magic.... i made one a bit longer ,,, i welded the cabel to the iron ...
Cool work thanks for my DIY knowledge congrats
V good production. Its a new business too for the time being.
great vibrator, you can really make the water bubble. 😎😍🤗
Muito perfeito seu trabalho parabéns 👏🏿
did you use gaz when you weld? (MIG MAG or simply core flux wire?)
Mig
Супер!!!я себе похожую сделал,только во внутрь еще налил масло и вибрация усилилась....
Сколько масла налил?
@@1_Vladi-Mir залил до верхнего подшипника...
@@vikvik2522 спасибо
can you test it with concreta please?
Very interesting, congratulations!
1
TMEOIi
Kamaayo gyud nga idea.
I think my girlfriend will like it 😅
And she'll probably kick you to the curb !! 🤓
Very interesting although I must ask what is that for?
Respect for you Man.
Excelente. Saludos desde Chile.
Semplicemente 🔝🔝👍
Good idea and well done, but WD40 does not smear! Better to use oil..
Excellent. And with wife approval factor.
7:40 someone has been watching This Old Tony 😁
loved it. good for lab scale vibrator
A veces nesecito uno para algunos trabajos tratare de hacer uno a ver si me sale
oies hermano!!! Disculpa mi ignorancia, pero..... para que sirve eso que hizo este amigo???? :O
@@albertoaguilar989 eso se usa para acomodar el concreto cuando se vierte en un molde por medio de la vibracion
@@josewagostolopez7510 oooorale!!!! nooo psss cada dia se aprende algo nuevo!!! tanks Hermano!!
The idea behind the vibration is awesome.
That was simply wonderful. Thank you very very much. That was just I was looking for a long time
👍👍👍👌👌👌💖💖💖mereliye jaruri tha
Dhanyabad dost ।
Все очень аккуратно сделано!
Что это я непониль
Not as good as the commercial unit but damn close. Very Ingenious. You are, without a doubt, talented.
Who needs silicon version?
brilliant 👍🏻, from where did you get this hause fitting and its fitting endings?! keep up the good work
Valentines present?
For you?
Great present for my wife on 8 march!
Is it still working. The wire rope has counter clockwise twist, and driving it clockwise will untwist it. How many hours of real concrete vibrating has this tool done?
You earned the subscribe! Awesome to watch this build. I'm wanting to make a walk behind compactor in the next year or two. Jack hammer too... so I don't think I'd use a jumping jack tamper/compactor though the thought has crossed my mind. Completely different... though this vibrator is more like the walk behind plate compactor. Really neat to see this design and construction. Thanks for sharing!
Waaww so nice broh, a pecfect homemade invention 🫡😎
Супер!!!
Felicidades muy buen inventó
The TOY above all toys!
Excellent project! Just a pity I'll never afford all those precision equipment.
There's a que of ladies around the block.
What is this herabora for? For churning water?
Ух щас бабы то начнут собирать 😂
very nice
Which is more expensive, lathe or the vibrator?
Vrye Nice video
Круто, мужик сделал вибратор... Жена будет довольна))
I just love videos where people use thousands of dollars of tools and machines to make a tool that can be bought for a couple of hundred dollars.
Maravilloso desafío de Sabiduría, Dios bendiga su Vida y Familia, y muchas gracias por compartir su creación técnica para todos nosotros en el área de construcción y otros servicios.
❤ Thank you for your help
Mil felicitaciones 👏👏👏👏👏
Muy buen trabajo gracias muchas bendiciones
Excelente la idea saludos desde panamá👏🙋♂️🇵🇦