Great video. Hey, I wanted to let you know that the clips that are pointed straight out and appear to not attach anywhere actually do and should get used. You need to carefully bend those clips upward. Once you do so, you will see that they can attach with pin clips to existing holes located above them. They can take the bending. I have had to take the corner pieces off a couple of times and had no problems reattaching them. Hope this helps. Keep up with your videos. They help others a lot. Take care…
Hello - I've got a 2021 Honda Accord and am very interesting in the Yofer front lip. I'm a little weary about installing myself. Do you know of any auto stores that do this kind of installation?
The tail lights are connected to your headlights. If you unlock your car and the headlight isn’t on it won’t show the animation. If that doesn’t work double check your wirings, there might be something you missed or something
It does Match the paint, for some colors you may not get the exact perfect match but you wouldn't be able to notice the difference. The front lip never changed color or had yellowing, you could get the front lip from several sellers like Xgenauto, Aeroworkz or eBay
I have a 2021 Accord Sport with Pearl White finish. A lady hit my car and damaged my front bumper near the wheels on the driver side, in an attempt to avoid her, she forced me to bump into the curb and I messed up my passenger side front tire. Would this fit if there is a little bit of warping on the car? Thank you!
I mainly just wanted to make the nose look more aggressive and not really add the side skirts or rear pieces. Only other mod I was thinking to do was change out the tail lights to the style like your car has
On the side when i installed my yofer lip its coming out a lil i think its probably because of the tape. Cam i take off the side one and re do it without any harm
you can, i had this issue tho and could not fix it, i didn’t know what to do, then finally i went on a freeway and scraped the lip almost completely off on the sides, so be careful, and if you find a solution lmk
I don't think they have these types of the lip for 2017 accords. I had one myself before and they don't have anything like it. Either they have a universal lip or molded ones
Overall, installing the front lip will make the illusion of your car being lowered and the front will drop a half-inch to 2" depending on your suspension set up.
@@mickyandualem1808 I attached the side pieces first.. then I aligned the middle piece to one side then stretched the middle piece by pulling it towards the other piece.. you have to use force in order to reach it on the other side locating where the other whole is. If you’re in NYC, Long Island or jersey I could help you install it.
hey. it look really good I have 2021 to. seen the older lip on 2021 & they don't fit right & people still install them but this one it perfect.. good looking out. now I know which one to get...
They are available through Hirev sports, Ebay, and aerowerks.. th-cam.com/users/redirect?event=comments&redir_token=QUFFLUhqbmpnUnE3b256Q2NQNkdDUnpIUE81TnRUbWZ4QXxBQ3Jtc0tsOXBDNXUybTZpTW40R2NIQlFHREV5ZHlkU1JWNlpvUW9UN0dlTEZITmloWTRYOVc1V2JwekJ2THh4eWJ4VURJdXQ4NVZNbktCSGNhRTU3MDJrSXBJMVJMQk14b3ZQWUw4SGYzT2Y0Umxab0U3Qlc3dw&q=https%3A%2F%2Fwww.ebay.com%2Fitm%2F194238451805%3Ffits%3DYear%253A2021%257CModel%253AAccord%26hash%3Ditem2d3983905d%3Ag%3AoxIAAOSwPvlg7Jno&stzid=UgwZw6rJ-Fbml3ELWtt4AaABAg.9T_pJUhOzUI9WU5-kZTByI
Yes it will. Fair warning tho, I’ve seen a couple kits that I’ve installed to people that it might not be a perfect fit and might need some slight modifications.
Here you go bro; www.ebay.com/itm/For-2021-22-Honda-Accord-Yofer-Painted-White-Pearl-Front-Bumper-Lip-Splitter-Kit-/194238451805?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Why does yofer sell this for the price that it’s at with so many problems and improper fitment 🤦🏽 am I safe going with an eBay lip? If yofer has these problems how much worse can an eBay one be?
I’ve been getting a lot of questions on my dm how I made the lip fit. Honestly the lip fits perfectly for this one, I’ve also encountered some other body kits that I’ve installed for people and there’s defects on fitments.
Nice install video, makes it easy to replicate the process. By the way, I am not so interested in installing the middle piece. You think the 3M is enough to just hold the two side pieces on reliably? Also, how close was the paint match for you? I only ask because sometimes the colors can be off in the videos.
Thank you bro. 3M tape will suffice but if you want a better grip use screws on the bottom like it was shown in the video. The paint match is identical and there’s no problem for having a mismatched colors.
The word ‘tape’ is a non-count noun, meaning it’s something than cannot be counted such as water or not counted easily, such as grains of sand on a beech or sugar in a bag. As such, there is no plural. If a non-count down does show up wearing plural clothes, such as fishes, sugars, or tapes, it refers to various types or varieties of that thing. “There are many tapes in the world” means there are many different types of tape.
Thank you for the very insightful information. I apologize for that mistake. Also, you misspelled “beach”. Thought you may want to edit that. But no hard feelings here. I really appreciate that. I’ll keep that in mind.
![⭐️( ลอยกระทง 2024 ) Ver. แดนซ์ Remix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/rMWOLhgXUHc/mqdefault.jpg)
Great video. Hey, I wanted to let you know that the clips that are pointed straight out and appear to not attach anywhere actually do and should get used. You need to carefully bend those clips upward. Once you do so, you will see that they can attach with pin clips to existing holes located above them. They can take the bending. I have had to take the corner pieces off a couple of times and had no problems reattaching them. Hope this helps. Keep up with your videos. They help others a lot. Take care…
Thank you so much and I appreciate the insight and tip. I’ll definitely keep that in mind.
Video quality is🔥 fw the hdr
Thank you sir!
I have a white accord.. glad i seen this so i make sure to get the black lip😊
I have a pearl white 2019 2.0T.
Fantastic ride. This is most likely my next project. Good job, bro! ✌🏼😎
Thank you! I appreciate it. 2.0's are beast
Pearl white rules. I’d thought I’d never say that bc I generally dislike white cars 😂
Link for the bag of OEM clips/screws you used?
Hello - I've got a 2021 Honda Accord and am very interesting in the Yofer front lip. I'm a little weary about installing myself. Do you know of any auto stores that do this kind of installation?
I would say go to a performance shop or wheel shop who can help you install it.
Nice bumper lip my only issue is that I can’t get into driveways without scratching my bumper lip. Somebody tell me I am doing something wrong ?
My new fave front lip
I just install my v3 tail lights, they work but when I unlock the car there's no animation , what should I do
The tail lights are connected to your headlights. If you unlock your car and the headlight isn’t on it won’t show the animation. If that doesn’t work double check your wirings, there might be something you missed or something
@@10thgenAce thanks! I got it
Would you be interested in installing this on my 2021 accord ?
I would be honored to
How’s the color match?
Did your front lip ever change colors? Like yellowing and if not where did you get the front lip? And is it Matched with the oem paint?
It does Match the paint, for some colors you may not get the exact perfect match but you wouldn't be able to notice the difference. The front lip never changed color or had yellowing, you could get the front lip from several sellers like Xgenauto, Aeroworkz or eBay
I have a 2021 Accord Sport with Pearl White finish. A lady hit my car and damaged my front bumper near the wheels on the driver side, in an attempt to avoid her, she forced me to bump into the curb and I messed up my passenger side front tire. Would this fit if there is a little bit of warping on the car? Thank you!
Hi, I won’t be able to tell you for sure, shoot me the picture on my ig @10thgenace bc I don’t want to say yes to you and turns out it won’t.
did you put adhesive promoter onto the paint of the car?
Yes I did. BUT very lightly. You don’t want to overdo it and ruin the paint on your car
Cool do u have to put the weather strip on it
Yes, I highly recommend it. The weather strips helps block the water from going into the front lip and extends the longevity life of the 3m tape.
How much was this kit and where to order? Waiting for the 11th gen civic kit to drop
you can get them thru ebay, aerowerks on ig or hirev
@@10thgenAce awesome thanks!
Looks good but I’m getting ppf on mine I doubt they have templates
I don’t think they have cutouts, you’ll most likely cut them out yourself
Does the front lip kit look good even without adding the side skirts and rear pieces of the kit?
I mainly just wanted to make the nose look more aggressive and not really add the side skirts or rear pieces. Only other mod I was thinking to do was change out the tail lights to the style like your car has
Yes it does, it's not necessary for you to add the whole kit. its at your discretion and liking bro.
On the side when i installed my yofer lip its coming out a lil i think its probably because of the tape. Cam i take off the side one and re do it without any harm
you can, i had this issue tho and could not fix it, i didn’t know what to do, then finally i went on a freeway and scraped the lip almost completely off on the sides, so be careful, and if you find a solution lmk
Think about getting the full body kit but in afraid to do it myself and also dont have a garage, know anyshop that can do it? Im in nyc too
I have a silver 2017 accord sport, where can I get a black one or silver to match?
I don't think they have these types of the lip for 2017 accords. I had one myself before and they don't have anything like it. Either they have a universal lip or molded ones
@@10thgenAce Would it fit on 2018 accord 🤔
@@angelvasquez9002 This specific model, no. They have a front lip available for your model and year
What goes well with the side skirt and rear bumper?
Yofer all the way full bodykit. To go a bit extra further, check out s-Factor
Just a question, does putting this one make your bumper sag? As i have a lip (2018 version) and my bumper sagged.
Overall, installing the front lip will make the illusion of your car being lowered and the front will drop a half-inch to 2" depending on your suspension set up.
did the weather strip come with it
Yes, it does.
Those screws not good enough in high speeds. I took the engine protection cover off and got small bolts with lockinh nuts to be safe
Hello my friend, how are you! Where can I buy this front bumper lip? Tks
I'm doing great, how are you? You can get the lip from the following:
Ebay
Yofer
HiRev
Aeroworks
Can I get the link to the adhesive the one I bought peals off
the weather strip is pretty easy my friend. Also, here's the link for the adhesive promoter. amzn.to/3GNEmaD
@@10thgenAce I appreciate it
Do you have the size of the screw you used for the middle part that you bought Home Depot or auto zone
I used # 10 x 3/4”,1” and # 8 x 5/8”,1”
@@10thgenAce I’m having a really hard time fitting it on for some reason. How did you align it so perfectly?
@@mickyandualem1808 I attached the side pieces first.. then I aligned the middle piece to one side then stretched the middle piece by pulling it towards the other piece.. you have to use force in order to reach it on the other side locating where the other whole is. If you’re in NYC, Long Island or jersey I could help you install it.
I’m aware you made this a year ago, I checked your link for the lip but it wasn’t there
did it hold up ?
hey. it look really good I have 2021 to. seen the older lip on 2021 & they don't fit right & people still install them but this one it perfect.. good looking out. now I know which one to get...
I’m glad you find this content informative 💪🏼💪🏼
Where are the lights from for the interior ?
He got it from Amazon/eBay
Where can I order this? I’ve looked all over and can’t find the actual website
They are available through Hirev sports, Ebay, and aerowerks.. th-cam.com/users/redirect?event=comments&redir_token=QUFFLUhqbmpnUnE3b256Q2NQNkdDUnpIUE81TnRUbWZ4QXxBQ3Jtc0tsOXBDNXUybTZpTW40R2NIQlFHREV5ZHlkU1JWNlpvUW9UN0dlTEZITmloWTRYOVc1V2JwekJ2THh4eWJ4VURJdXQ4NVZNbktCSGNhRTU3MDJrSXBJMVJMQk14b3ZQWUw4SGYzT2Y0Umxab0U3Qlc3dw&q=https%3A%2F%2Fwww.ebay.com%2Fitm%2F194238451805%3Ffits%3DYear%253A2021%257CModel%253AAccord%26hash%3Ditem2d3983905d%3Ag%3AoxIAAOSwPvlg7Jno&stzid=UgwZw6rJ-Fbml3ELWtt4AaABAg.9T_pJUhOzUI9WU5-kZTByI
Where did u get the weather strip from?
It comes with the lip kit
we’re can I get that lip from ?
www.ebay.com/itm/For-2021-22-Honda-Accord-Yofer-Painted-White-Pearl-Front-Bumper-Lip-Splitter-Kit-/194238451805?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Nice work. Do they have these on metallic silver? Cant find them anywhere
I believe they do, check out aerosport on ig bro. And thank you
Where did you get the back lip from ?
Which one specifically?
Hi, do you think this kit fit on the 2022 accord?
Yes it will. Fair warning tho, I’ve seen a couple kits that I’ve installed to people that it might not be a perfect fit and might need some slight modifications.
@@10thgenAce thank you :)
Thanks for the videos man, Great tips.
No problem, glad that I could help.
Where did you get the Black H emblem? and did you get the ones for the Rear & Steering wheel?
Where did you buy it ? Link ?
www.ebay.com/itm/For-2021-22-Honda-Accord-Yofer-Painted-White-Pearl-Front-Bumper-Lip-Splitter-Kit-/194238451805?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Link for the lip
Did yofer come with weather strip??
Yes, it does.
where did you get this taillight
Either hirev sports or Amazon. Pick your poison 😁
Do you have a link for your adhesion promoter
Yessir, here you go amzn.to/3zvHUv0
So in order to attac the middle piece you have to drill a hole into the car itself?
Yes, you have to drill screws for it to secure better . Because if you don’t it’s just hanging.
Looks smooth!!!
Clean AF man!
Thanks man
It's imposible to install the weather strip ugh
it takes time and patience sometimes. but you'll get it bro
@@10thgenAce thanks bro
Can I have the link to buy one of these
www.ebay.com/itm/For-2021-22-Honda-Accord-Yofer-Painted-White-Pearl-Front-Bumper-Lip-Splitter-Kit-/194238451805?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
W Installation 🔥
Can u hook up my 20 21 accord like this....how can I reach u?
For sure bro, DM me on IG its @10thgenace and we'll set it up
Looks good Thanks for video
Thank you and you're welcome
SO clean 👌🏼
Thank you :)
Nice job wanna do another one
Nice bro could you please send me the link for the yofer lip cover
Here you go bro;
www.ebay.com/itm/For-2021-22-Honda-Accord-Yofer-Painted-White-Pearl-Front-Bumper-Lip-Splitter-Kit-/194238451805?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Just got my 2020 Touring so I just subscribed haha here goes my wallet!!!
LOL! Welcome to the party
Does It fit to 8th accord 4drs?
unfortunately it doesn't. This from lip is specific to 10th gen accords.
Bro! Do you have a link for that I been waiting!
www.ebay.com/itm/For-2021-22-Honda-Accord-Yofer-Painted-White-Pearl-Front-Bumper-Lip-Splitter-Kit-/194238451805?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Bro do you have a link for a 2019 front lip exactly like that ?
Why does yofer sell this for the price that it’s at with so many problems and improper fitment 🤦🏽 am I safe going with an eBay lip? If yofer has these problems how much worse can an eBay one be?
Honestly, bro, going with eBay isn't a bad idea and route to go. I got my body kit from eBay and had better fitment.
Never pay on some website for “Yoder” or Akasaka it’s all wholesale from china from the same people just with taxed prices. eBay the way to go
@@jordansantos3374 I thought so
What year the front lips?
2021
Do you have a link?
@@joebiscuit2005 www.ebay.com/itm/For-2021-22-Honda-Accord-Yofer-Painted-White-Pearl-Front-Bumper-Lip-Splitter-Kit-/194238451805?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
Thank you bro! I like the way you work keep it up bro!
@@joebiscuit2005 thank you Bro, I really appreciate it 🙏🏼🙏🏼
Pls send me link I busy front lip
www.ebay.com/itm/194238451805?fits=Year%3A2021%7CModel%3AAccord&hash=item2d3983905d:g:oxIAAOSwPvlg7Jno
Mine won’t fit well :/
I’ve been getting a lot of questions on my dm how I made the lip fit. Honestly the lip fits perfectly for this one, I’ve also encountered some other body kits that I’ve installed for people and there’s defects on fitments.
how much is the lip
Depends on where you get them usually runs between $150-$300
Thank you Any suggestions I live in south New Jersey
@@evelynhome2938 Check out Ebay, Hirev Sport or American Modified.
@@10thgenAce thanks again 😀
Good job 👏
Nice install video, makes it easy to replicate the process. By the way, I am not so interested in installing the middle piece. You think the 3M is enough to just hold the two side pieces on reliably? Also, how close was the paint match for you? I only ask because sometimes the colors can be off in the videos.
Thank you bro. 3M tape will suffice but if you want a better grip use screws on the bottom like it was shown in the video. The paint match is identical and there’s no problem for having a mismatched colors.
@@10thgenAce How did you find the color match to be?
@@DramaticallyUnhinged dm me on my ig bro @10thgenace
Yeah you wasted your time if if it doesn’t fit send it back. You should go to X GEN , where they have an entire bumper replacement
The 21 is a bit of a pain to install
Lol! It is, especially with the imperfections of it with the measurements but still managed to fix the problem
Look good
Thank you sir :)
dope af.
Good job 👍😍😍
Thank you!
You can work on mine. Just let me know. 2021 Accord. Touring. Black.
That’s awesome, hmu on my ig and we can arrange something
The word ‘tape’ is a non-count noun, meaning it’s something than cannot be counted such as water or not counted easily, such as grains of sand on a beech or sugar in a bag. As such, there is no plural.
If a non-count down does show up wearing plural clothes, such as fishes, sugars, or tapes, it refers to various types or varieties of that thing. “There are many tapes in the world” means there are many different types of tape.
Thank you for the very insightful information. I apologize for that mistake. Also, you misspelled “beach”. Thought you may want to edit that. But no hard feelings here. I really appreciate that. I’ll keep that in mind.
Where ar you ilike
I not speak inglés i lake to contact you to doo on my car i have honda 2022 sport
@@mariovicente3224 I am in Queens NY to be exact
Can you work on mine plz
Don’t forget how cheap these plastic lips and accessories are for the price 😂😂😂🔥
LOL! That's true, but you'll find one that's decent on price.
Shaved 2.0 seconds off 0-60 time.