Great Advice! We all can make contributions to help each other. 28 years in the biz and I've learned from this video. You never stop learning to be creative. Thanks from BCG
I like the way you take your time and explain your ways of doing things. You don't skip and assume that we should know. I been screen printing for 10 years on and off and still learning. I find your video helpful, Thank you and keep up the good work....
SUPER newbie here, just learning (single press) - just found you and this, I hope I can learn more from you. Thank you for the supportive message at the bottom 🤙🏽
Hey bro this video is on point. It really was a help to me, I am a new screen printer. I watch all tour videos and everyone have been very helpful to me. Now that i have setup my platen i am going screen print my first shirt tonight.
Good information, I do pretty much the same registration as yours with one exception. I find it easier to register the top of the shirt collar instead of the bottom, so I would come down three inches and put a mark and pull the top of the shirt collar up to the line to register it for the print and go down five inches for the top of the print. Using the bottom is more of a guess as you can not see the mark once you pull the shirt over it. Not a big deal just maybe a little easier to stay consistent. Thanks for the time you take to make these. I agree if you can't be helpful a comment is not necessary.
Man stop it.... None of your videos are boring! I just started learning how to screen print and vinyl print....... your videos are digital gold. Seriously, you are helping a lot. Peace bro!
Juan I ran across your videos, I’m getting educated and learning the process of screen printing. Thank you so much. This video alone was worth it. Only bad thing I’ll say is, I wish I found this video earlier. Thanks again
Thank you for this video. You've taken a subject that is easily taken for granted and made a must watch video out of it! Thank you for taking the time out of your busy schedule to shoot and edit the useful videos you upload to TH-cam.
Whatever you do, don't stop making videos please. I just found you after a few years of doing shirts very casually. I wish I'd seen you first. You have helped me tremendously. Not just this video, many others you have as well. You explain very well and are non-condescending. You're a natural.
NO ONE else, anywhere I looked, had anything remotely close to this kind of information on how to do registrations/measurements, thank you so much brother, not only for the knowledge, but your genuine commitment to making the community a better place.
I am not a professional screen printer but I now know how important and helpful this is. Thank you very much for your time and for your very informative tutorial. I appreciate it.
Great video, super informative. This was just what I needed to complete my first setup. Great attitude brother, we need more people like you. Thanks, you now have a new subscriber.
thanks, so much!!!! i needed this info, just starting out, been watching several videos out there, but yours, are the most comprehensive to the new screen printers...cheers from El Salvador!
Brotha, I like your videos...I been screen printing for a few years now but I always find your videos useful and I learn something new from you everytime I watch a video from you...keep u the good work ..thumbs up!
brother i just want to say THANK YOU for even taking the time to show your videos..... and you are right yes this is fare......THANK YOU i am learning alot. I appreciate your time and effort
I love the message at the end! If someone thinks they've arrived and the learning stage is over, they're slippin and trippin. Pursuing better ways to hone your craft is the path to be on. Printing veterans can learn a lot from going back to basics and rethinking what they do and why they do it.
you prolly dont care but does anyone know of a trick to log back into an instagram account..? I stupidly forgot the password. I would love any tips you can offer me!
@Darius Princeton Thanks so much for your reply. I got to the site on google and Im waiting for the hacking stuff now. Takes quite some time so I will reply here later when my account password hopefully is recovered.
Hey awesome tips. I think it would be beneficial for you if you put in the title Crest print or use Crest print in the description and tags So people can find this video Because it has great tips on the Crest printing Which I found truly helpful . I just think youll will get more views and comments if you do that
I just wanted to tell you i really appreciate you for sharing such great information in all your videos ive seen hundreds of videos but yours by far has taught me more than any other... i think other people just want to further thier own agenda and plug sponsers. When you do whats right and im grateful thank you.
Of course... question by chance do you know where i can get 100% cotton hoodies, longsleeves and t shirts at a good price in bulk. Preferably American or mexican made? Not mandatory but it would be nice to keep money close to home...
If you use your system for chest prints and load a 7x or even a 3x the print will be FAR too close to the center of the shirt. I've been doing this for 30 years. The chest print location will VARY according to the size of the shirt. Just being part of the solution.
I am new to screen printing and just came across your videos tonight. Thank you for explaining this so well. I knew to come down 4" and over 2-4" but did not know how to align the print right there. Is it on the line? Under it? Over.. You explained it very well. Thank You! I do have one-maybe 2 questions. Do you have a video on making the actual registration marks? I assume the marks are 3/4" above the design to align with your mark on the board? When you place the print film on the screen to burn it, how far down from the aluminum do you bring it? 4 inches??
no lo explique bien… aqui ba! del cuello asi a bajo mide 4 pulgadas I has tu linea de registro de esa linea de registro mides media pilgada asia arribe que es la linea que usas para tur marcas de registro asi cuando imprimas colores multiples tienes espasio para subir a bajar un poco tus registros.
Question...for your front designs the registration marks are 3/4” above the design, how high would the registration marks be for the back? Do you still want the design in the same location on front and back?
Great video I allways wondered how people set up there lines... I have a question for you when you first started how did you get business besides the friends and family
thank you for watching!!! I don't have ANY friends or family as customers! first mistake in business is to get your friends and family as customers... why? well they are just NOT honest enough or they will try to bring you down!!! if you know what I mean, so I just went out and sold my work to complete strangers and till today I do not target my close friends or family.
I'm about to start printing and had a couple of questions about shirt size vs print size, especially when it comes to a vertical print. Let's say I wanted to print a word vertically down the pocket side of a shirt. Would you have to get a larger / longer pallet for a 7X and would I have to create bigger lettered screens for that size?
Excellent video!!! My job today to do!! First time to print with my students. Have you made a video about making the pallet level so when the screen comes down the space between the screen and pallet is small? I hope that makes sense.
Thanx to the screen printing gods that share important info for the newbies ! 🤘🏾🤘🏾🤘🏾
Great Advice! We all can make contributions to help each other. 28 years in the biz and I've learned from this video. You never stop learning to be creative. Thanks from BCG
My friend Juan . u are the best . eres un caballo en el arte Man. Gracias por tu experiencia
I like the way you take your time and explain your ways of doing things. You don't skip and assume that we should know. I been screen printing for 10 years on and off and still learning. I find your video helpful, Thank you and keep up the good work....
thank you that means a lot to me, thank you for watching!
SUPER newbie here, just learning (single press) - just found you and this, I hope I can learn more from you. Thank you for the supportive message at the bottom 🤙🏽
Hey bro this video is on point. It really was a help to me, I am a new screen printer.
I watch all tour videos and everyone have been very helpful to me. Now that i have
setup my platen i am going screen print my first shirt tonight.
5 years later and this video is still super helpful. thank you my guy!
Good information, I do pretty much the same registration as yours with one exception. I find it easier to register the top of the shirt collar instead of the bottom, so I would come down three inches and put a mark and pull the top of the shirt collar up to the line to register it for the print and go down five inches for the top of the print. Using the bottom is more of a guess as you can not see the mark once you pull the shirt over it. Not a big deal just maybe a little easier to stay consistent. Thanks for the time you take to make these. I agree if you can't be helpful a comment is not necessary.
Thank you so much!! I appreciate your helpfulness. We are entry level and you have helped here. Thank you again!!
Man stop it.... None of your videos are boring! I just started learning how to screen print and vinyl print....... your videos are digital gold. Seriously, you are helping a lot. Peace bro!
thank you that means a lot to me!
Juan I ran across your videos, I’m getting educated and learning the process of screen printing. Thank you so much. This video alone was worth it. Only bad thing I’ll say is, I wish I found this video earlier. Thanks again
Great video and message!
One of My favorite go to videos Juan. I refer to it often 👍
Thank you for this video. You've taken a subject that is easily taken for granted and made a must watch video out of it! Thank you for taking the time out of your busy schedule to shoot and edit the useful videos you upload to TH-cam.
Eddie Jr thank you for watching
LOVE YOUR VIDEOS !!!! I am looking to set up a small home print press. Your video's have been a big help. Wish me luck !!!
Whatever you do, don't stop making videos please. I just found you after a few years of doing shirts very casually. I wish I'd seen you first. You have helped me tremendously. Not just this video, many others you have as well. You explain very well and are non-condescending. You're a natural.
NO ONE else, anywhere I looked, had anything remotely close to this kind of information on how to do registrations/measurements, thank you so much brother, not only for the knowledge, but your genuine commitment to making the community a better place.
Cat spit had a good video as well
Perfect! Thank you, thank you very much!
I am not a professional screen printer but I now know how important and helpful this is. Thank you very much for your time and for your very informative tutorial. I appreciate it.
I enjoy listening your videos while digitizing, would like to see more embroidery stuff.
Great video, super informative. This was just what I needed to complete my first setup. Great attitude brother, we need more people like you. Thanks, you now have a new subscriber.
Love your message at the end. I’m 1 year in but still learning. Thanks for the positive motivation!
This was just the video I was looking for! Thank you, very informative!
The most helpful video yet! Thanks man
Thank you for this, I am just a fun at-home printer and this helped a lot!!
Yo te agradesco mucho por tus classes en video eres un excellence maestro God bless you my teacher
Another great informative video. Thanks brother!!! 👍
TY Juan, these lines work great for me!
Love your message at the end. I’m 1 year in but still learning. Thanks for the positive motivation!
I am a beginner, thanks so much for your videos. You are my best tutor. Appreciate your works. I feel like this video is meant for me. Peace ❤️
Thank you for this info I’ve struggled for the longest time with left chest printing ... I’m going to use this going forward
This really helps so much!!!!! Thanks Brother!!!!
look at the smile, he is so happy about his work.
Good stuff Juan. Thanks for sharing your knowledge.
thanks, so much!!!! i needed this info, just starting out, been watching several videos out there, but yours, are the most comprehensive to the new screen printers...cheers from El Salvador!
Thanks for the great info!! I really enjoy listening to you. Thanks for sharing your knowledge with us! God bless you!!
Your videos are SO HELPFUL. I am new to this industry and you explain everything so well. I appreciate you. Thank you so much!!! New subscriber!
Thanks for the doing the video
Hey, I really appreciate you taking the time to create lessons such as this. Super helpful. Thanks!
thank you for watching
ABSOLUTAMENTE JUAN
These videos a great juan no matter if you’re entry level or experienced they are helpful keep up the great work
Gracias for the video bro. Im just starting to screen print and this helps alot looking forward for more great videos. 👍
Perfect, I'll be using this method.. Yes, I'm new at this silk screen printing..thanks bro
Dude you are awesome. I appreciate your video
Thank you for sharing.... your vids are very detailed and useful... this one has saved me a lot of time... thanks again.
Brotha, I like your videos...I been screen printing for a few years now but I always find your videos useful and I learn something new from you everytime I watch a video from you...keep u the good work ..thumbs up!
thank you
Juan! Thanks for sharing! Keep on posting videos! I really enjoy your videos!
thank you!!!
Thank you so much this video was really helpful I’m new into screen printing and this was great!!
Thank you for this video I truly needed the help
Thank you sir. Very good information. Thank you for sharing.
Helped so much !!!! Thank you
brother i just want to say THANK YOU for even taking the time to show your videos..... and you are right yes this is fare......THANK YOU i am learning alot. I appreciate your time and effort
Many thanks. This video was spot on. :)
Loved your video, very helpful
Great video man!
This was very helpful thank you so much! ~Blessings
like your videos a lot man keep it up.
Thanks for sharing your knowledge
awesome info thanx so much mr!
Thank you. I am a beginner and scared. I am glad I found your video. Keep up your talent for the beginners.
Bridget Gainous thank you for watching
Appreciated been having that issue so this is great yeah for success
Hell of a great video
Thanks man, that helped me bro do my 2 color job.
Huge help because I was lost!!!!!!
very helpful video, thanks juan.
thank you so much man ! you are a legend fr
I love the message at the end! If someone thinks they've arrived and the learning stage is over, they're slippin and trippin. Pursuing better ways to hone your craft is the path to be on. Printing veterans can learn a lot from going back to basics and rethinking what they do and why they do it.
you prolly dont care but does anyone know of a trick to log back into an instagram account..?
I stupidly forgot the password. I would love any tips you can offer me!
@Taylor Harlem instablaster =)
@Darius Princeton Thanks so much for your reply. I got to the site on google and Im waiting for the hacking stuff now.
Takes quite some time so I will reply here later when my account password hopefully is recovered.
@Darius Princeton It worked and I actually got access to my account again. I'm so happy:D
Thanks so much, you saved my account!
@Taylor Harlem no problem =)
I appreciate you man!
THANK YOU SO MUCH FOR YOUR HELP
Thank you so much! Your video is very helpful. I
t has been very hard for me to understand where to place the left chest.
Shout out to my mentor Donald Paschal . I Love You Brother. Great video btw
Ty I’m a newbi and this help a lot ty
It is helpful thank you brotha
Hey awesome tips. I think it would be beneficial for you if you put in the title Crest print or use Crest print in the description and tags So people can find this video Because it has great tips on the Crest printing Which I found truly helpful . I just think youll will get more views and comments if you do that
thank you
Juan I didn't even know this was you from Liberty designs on the print squad. I been subscribed to your channel forever already
LOL that's funny
I just wanted to tell you i really appreciate you for sharing such great information in all your videos ive seen hundreds of videos but yours by far has taught me more than any other... i think other people just want to further thier own agenda and plug sponsers. When you do whats right and im grateful thank you.
Thank you so much that means a lot to me
Of course... question by chance do you know where i can get 100% cotton hoodies, longsleeves and t shirts at a good price in bulk. Preferably American or mexican made? Not mandatory but it would be nice to keep money close to home...
@@angelgonzalez-cb3ru alphabroder brand = JAmerica
You the bomb...thanks
After watching you and Tiano here on TH-cam I've decided to take a loan out of my 401k get a 30x40 shop built and dive into it!
good stuff
Bro, I love the way you explained it. Now can you do a video on burning the film on the screen?
Very Nice - Good Job - Stay Real - Don't Commercialized when u make your 1st million :-)
Kool!!!
Gracias juan, mis paletas son cuadradas, bueno rectangulares sin el neck pero me ayudo mucho tu video, gracias
thanks it did help
If you use your system for chest prints and load a 7x or even a 3x the print will be FAR too close to the center of the shirt. I've been doing this for 30 years. The chest print location will VARY according to the size of the shirt. Just being part of the solution.
I am new to screen printing and just came across your videos tonight. Thank you for explaining this so well. I knew to come down 4" and over 2-4" but did not know how to align the print right there. Is it on the line? Under it? Over.. You explained it very well. Thank You! I do have one-maybe 2 questions. Do you have a video on making the actual registration marks? I assume the marks are 3/4" above the design to align with your mark on the board? When you place the print film on the screen to burn it, how far down from the aluminum do you bring it? 4 inches??
Very good question...hope Juan can answer, and I'm reading too....
bravo.
thank you
Thanks this helps a lot.. i just want to know, do you put adhesives on your plates? If you do how do you remove it or what do you use to remove it?
doing this right now!
No entendi como alinear para el back print. Dices marque media pulgada del neck line y ahi inicia la impresion? no esta muy cerca del cuello?
no lo explique bien… aqui ba! del cuello asi a bajo mide 4 pulgadas I has tu linea de registro de esa linea de registro mides media pilgada asia arribe que es la linea que usas para tur marcas de registro asi cuando imprimas colores multiples tienes espasio para subir a bajar un poco tus registros.
Yes you did
Thank You
Question...for your front designs the registration marks are 3/4” above the design, how high would the registration marks be for the back? Do you still want the design in the same location on front and back?
Great video I allways wondered how people set up there lines... I have a question for you when you first started how did you get business besides the friends and family
thank you for watching!!! I don't have ANY friends or family as customers! first mistake in business is to get your friends and family as customers... why? well they are just NOT honest enough or they will try to bring you down!!! if you know what I mean, so I just went out and sold my work to complete strangers and till today I do not target my close friends or family.
Liberty Graphic Designs perfect answer thank you
Great video! Do you have tape on you platen or do you just clean it?
i have sausage fingers... thats why all my prints are off lol
favorite part was the "community" :)
Thats funny
I'm about to start printing and had a couple of questions about shirt size vs print size, especially when it comes to a vertical print. Let's say I wanted to print a word vertically down the pocket side of a shirt. Would you have to get a larger / longer pallet for a 7X and would I have to create bigger lettered screens for that size?
Saludos
Excellent video!!! My job today to do!! First time to print with my students.
Have you made a video about making the pallet level so when the screen comes down the space between the screen and pallet is small? I hope that makes sense.
Yes, that's called off contact, we control that by adjusting the screen it self not the pallet or platen.
@@LibertyGraphicDesigns TY - VM
which is the best plastisol paint