I did purchase the Jard Trigger. The install was very easy and adjusting it was also very easy. I have mine set to a 3oz pull. I went to the range today to try it out and was very impressed with the trigger. I also let a friend shoot my gun and he has an Anschutz that he shoots all the time, he told me that it was very close to the trigger that is in his Anschutz. He is now thinking about ordering one for his CZ 457... Thanks for bringing this to my attention. I would purchase this again.
Just bought one for my brand new LRP from EABCO - sorted out the import details first and got it shipped to the UK in less than a week. Can't wait to install it and give it a go. Will update on my findings on anyone thinking about purchasing one... it's your fault i'm broke now josh,..... lol
I recently bought a Shilen trigger for my Bergara B14 R. Practically no trigger movement and it is set at 2oz. Nicely built. I really like this trigger.
For $3.50, I bought a Glock reduced power FPB spring and got my CZ 457 trigger down to a pull weight of 2.9 ounces. Shot four 2500 targets so far this year in the ARA Factory Outdoor class. I decided it was a bit too light and adjusted it to just under 4 ounces.
My Timney brakes at 3.5oz. Just work on the adjustments. I am pleased with this trigger. My Manners stock is excellent, I am shooting 1% off perfect cards with Lilja barrel, Manners Stock, and Lapua OSP ammunition,, couldn't be happier.
Dang that trigger is light. Building a CZ for benchrest, so it will work fine, but will stick with Timney for my other rifles. Waiting for a new digital trigger gauge to see how light it is. It does not register on my current basic gauge. Ordered the 3 to 6 oz Jard, so it is probably around 4 oz. Yikes! Don't shiver in the cold weather.
Thanks Josh, great clip and trigger. I run a custom BR CZ 452 and am stuck with the standard trigger tweaked but wish I could buy a 3 ounce trigger for the 452.
my timneys in my CZs have gone down to 4oz. I could probably go a little lower. I run 1lb 6ozs. I shoot .1-.3 at 50yard. Factory barrel, gun is highly modified and tuned. No gunsmithing.
Did you experience any creep before the break? I just got mine in and some pulls will be solid single stage, and randomly will have up to an eighth of an inch of creep before breaking. Jard wants me to send it back in so they can look at it. Just curious if I got a bad one. I did adjust seer engagement as low as safely possible and it helped, but didn't eliminate it.
Just like my Bergara in the end you have very few original parts left. Might as well have bought the Voodoo or RimX to start. That said, good informative video.
Josh, I saw you have the DIP aluminum magwell installed on your build. Do you find the magazine block to have side-to-side play, basically loose because the DIP magwell internal sidewalls are spaced further apart? Do your magazines have a lot of play side-to-side (not front to back, that would be bad and affect mag lock-up)? I find the OEM plastic mag housing to fit the mag block snugly and my OEM mag and L3i 13-rd aluminum mag to fit well (not tight, and not loose) or any slop side-to-side like I have with the DIP mag housing.
@@PursuitofAccuracy thanks for the feedback. I recently purchased one and after install, I noticed a lot of play with the mag block and with the magazines as well. I have been trying to work with DIP and sent photos showing the visible differences. I think the recent production is a bit different as the internal dimensions are clearly different from OEM, yet the outside dimensions match up. Given that polymer “thickness” needs to be more to have rigidity and aluminum can do the same rigidity in thinner thickness, it goes to stand that the internal dimensions will not be the same (aka more room). DIP is giving me a hard time, and eventually requested it be sent in for their “QC check”. As an engineer, I have already measured all the dimensions to quantify the differences. As a backup, I got (2) OEM housings from CZ USA and will run with those until either DIP replaces mine with an appropriate one or refunds me. I only tell you this as you are an influencer (at least to me!) and if you make recommendations, to just know that it is possible, (sample of 1) may not be as good as other people’s experience. Case in point…Volquartsen extractor for CZ457. Thanks for the feedback!
Very cool. Recently put a Timney in mine. That being said, is there any worry about accidentally firing that light of a trigger when slamming a bolt in?
I habe Mr Fly trigger on my CZ 455 and couldn’t be more happy . Interesting if you have tried Mr Fly and how you would compare it to this new trigger . Thanks
That trigger looks awesome. Btw, how is the balance of that build in the XLR chassis? It looks like you're only using a single pair of side weights up front. With those, does it balance evenly on a barricade bag?
Thanx for this video. But could you crearly say which triger is best for just you- Tumney or Jard. You've tried both. Me- not either and I'm thinking which to buy. Thanx more in advance for you direct answer.
Josh. Is that a sako quad in the background? Will you be making videos on a quad. Big shame no chassis available for quad as would be a good nrl option. Thanks
I am considering ordering one after seeing your video. Did you install it your self and is the any problems that you have experienced with it? I have a very limited budget so I would like to know that I am not going to have issues with this trigger before I purchase it. Thanks and keep the videos coming, I watch every one of them.
I installed it. Very simple to do and no issues. They have it set from the factory so its 1 bolt and the e clip to remove the pin and it drops right in.
Light trigger! Desperate for some advice. I often have cases eject and hit the area 419 rail and then bounce back into the chamber. Is there any way to fix this? I know you have solved many .22 issues. Would really appreciate a response. 🤘🏻👌🏻
Ok I’m confused. There is an over travel adjustment on the trigger. I’m confused why there is so much travel. Did you not adjust screw 8# for over travel?
Good thing they have 3 pull weights the 3-7 is not practical I have been shooting my Anschutz 1710 with a 5 ounce pull weight and is too light I still have unintentional discharges a pull weight of at least 8 ounces is better
This is off this subject but I wanted to ask you a question. I can't afford 3 or4 hundred dollars for a bipod. I can afford somewhere around a 100 bucks. So, the question is what bipod would you recommend for around 100 bucks? I shoot a Bergara off a bench mostly.
I did purchase the Jard Trigger. The install was very easy and adjusting it was also very easy. I have mine set to a 3oz pull. I went to the range today to try it out and was very impressed with the trigger. I also let a friend shoot my gun and he has an Anschutz that he shoots all the time, he told me that it was very close to the trigger that is in his Anschutz. He is now thinking about ordering one for his CZ 457... Thanks for bringing this to my attention. I would purchase this again.
Just bought one for my brand new LRP from EABCO - sorted out the import details first and got it shipped to the UK in less than a week. Can't wait to install it and give it a go. Will update on my findings on anyone thinking about purchasing one... it's your fault i'm broke now josh,..... lol
I recently bought a Shilen trigger for my Bergara B14 R. Practically no trigger movement and it is set at 2oz. Nicely built. I really like this trigger.
For $3.50, I bought a Glock reduced power FPB spring and got my CZ 457 trigger down to a pull weight of 2.9 ounces. Shot four 2500 targets so far this year in the ARA Factory Outdoor class. I decided it was a bit too light and adjusted it to just under 4 ounces.
Sweet
My Timney brakes at 3.5oz. Just work on the adjustments. I am pleased with this trigger. My Manners stock is excellent, I am shooting 1% off perfect cards with Lilja barrel, Manners Stock, and Lapua OSP ammunition,, couldn't be happier.
Got mine a couple weeks ago.. went with the 7 to 10 oz. Very happy with it.. good video.
Looks like a sweet trigger, thanks for showing gear I probably would never see or hear about.
I would love to have either one of those triggers. They just cost to much for this poor old man to afford. Great video Josh.
You work that 457 like a machine. I think you are at your best when you get behind the trigger of your 457.
Thanks brother. I do love my cz's
@PursuitofAccuracy how do you like the tract optic
@@willthompkins1671 i love the tracts for their price point. They punch in way above their weight class at what they charge
Thats best KYL work i've seen you do!
Haha thanks, went well for sure
I'm running the Timney for NRL22/PRS which this is probably a bit too light for, but for a benchrest/ARA/22 F-Class setup this is very promising!
I may or may not run 4-6 oz triggers for prs / nrl 😆
@@PursuitofAccuracydo it!!
Another excellent article Josh. Blessings
Dang that trigger is light. Building a CZ for benchrest, so it will work fine, but will stick with Timney for my other rifles. Waiting for a new digital trigger gauge to see how light it is. It does not register on my current basic gauge. Ordered the 3 to 6 oz Jard, so it is probably around 4 oz. Yikes! Don't shiver in the cold weather.
Thanks Josh, great clip and trigger. I run a custom BR CZ 452 and am stuck with the standard trigger tweaked but wish I could buy a 3 ounce trigger for the 452.
John Langley makes a 2 oz.for the 452 but it’s not cheap. Mine measures 1.7-1.9 oz.
I want one but the way I sneeze I better stay with the 1 1/2 lb trigger.
Awesome 🎉
Lol
About time there are more choices!!
Agreed
Just bought one. I'm spoiled with my Jewell 1.5 oz on my Bergara. The Timney just isn't cutting it on my MTR anymore.
Nice
Another good one Josh! Sure enjoy them and all the new to me info!
I love my Tract scopes, 3 and counting!
Good stuff. My 457s have the yo dave and I have them dialed down to below 6oz
I have ran a yodave and it was impressive for sure. I think mine got me to around 6oz as well
my timneys in my CZs have gone down to 4oz. I could probably go a little lower. I run 1lb 6ozs. I shoot .1-.3 at 50yard. Factory barrel, gun is highly modified and tuned. No gunsmithing.
Thats pretty good. Love the timneys
That extra movement is very noticeable in the video. First thing i noticed before you ever mentioned it.
Good eye
Did you experience any creep before the break? I just got mine in and some pulls will be solid single stage, and randomly will have up to an eighth of an inch of creep before breaking. Jard wants me to send it back in so they can look at it. Just curious if I got a bad one. I did adjust seer engagement as low as safely possible and it helped, but didn't eliminate it.
love to see more of the 457 videos...... maybe compare the VPC againest the MTR
I really dont know anyone with a vpc. If i can borrow one i will for sure
To bad you're not in South Georgia, you would be welcome to use mine.@@PursuitofAccuracy
Just like my Bergara in the end you have very few original parts left. Might as well have bought the Voodoo or RimX to start. That said, good informative video.
I like the cz and i like the mods, win win
3-6oz would be regular NDs for me!
Just takes some time behind it
Josh, I saw you have the DIP aluminum magwell installed on your build. Do you find the magazine block to have side-to-side play, basically loose because the DIP magwell internal sidewalls are spaced further apart? Do your magazines have a lot of play side-to-side (not front to back, that would be bad and affect mag lock-up)?
I find the OEM plastic mag housing to fit the mag block snugly and my OEM mag and L3i 13-rd aluminum mag to fit well (not tight, and not loose) or any slop side-to-side like I have with the DIP mag housing.
I haven't noticed any side to side play. I haven't looked for it either to be honest, since the mags run great I just leave it as it is
@@PursuitofAccuracy thanks for the feedback. I recently purchased one and after install, I noticed a lot of play with the mag block and with the magazines as well. I have been trying to work with DIP and sent photos showing the visible differences. I think the recent production is a bit different as the internal dimensions are clearly different from OEM, yet the outside dimensions match up. Given that polymer “thickness” needs to be more to have rigidity and aluminum can do the same rigidity in thinner thickness, it goes to stand that the internal dimensions will not be the same (aka more room). DIP is giving me a hard time, and eventually requested it be sent in for their “QC check”. As an engineer, I have already measured all the dimensions to quantify the differences. As a backup, I got (2) OEM housings from CZ USA and will run with those until either DIP replaces mine with an appropriate one or refunds me.
I only tell you this as you are an influencer (at least to me!) and if you make recommendations, to just know that it is possible, (sample of 1) may not be as good as other people’s experience. Case in point…Volquartsen extractor for CZ457. Thanks for the feedback!
@@stevenlee2780 good to know. Appreciate the info!
What bag do you like to use on obstacles? Obstacles meaning things in NRL like ladders or tank traps or tires
Gamechanger schmedium heavy fill
@PursuitofAccuracy Thank you! Keep up with the great content btw. You're my favorite .22LR TH-camr by far
You amaze me Josh. I'm trying to keep up:)
Lol I appreciate ya! Im sure you could blow my doors off
Been an honor and pleasure following you partner.@@PursuitofAccuracy
@@Long-gray-line truly appreciated. Just hope the content doesnt dissapoint. Bringing more cz and tikka videos to the channel
Just put in order, thanks for the tip 👍
This trigger is certainly a work of art, but for an old guy that just putzes around, my $15 YoDave spring is adequate.
Nothing wrong with that
Very cool. Recently put a Timney in mine. That being said, is there any worry about accidentally firing that light of a trigger when slamming a bolt in?
Slam fires are usually from too little sear engagement. If your leaving it as set from Jard or setting it properly it should not be an issue
Your the best👍!!!
I habe Mr Fly trigger on my CZ 455 and couldn’t be more happy . Interesting if you have tried Mr Fly and how you would compare it to this new trigger . Thanks
I havent tried one yet
That trigger looks awesome. Btw, how is the balance of that build in the XLR chassis? It looks like you're only using a single pair of side weights up front. With those, does it balance evenly on a barricade bag?
It would need more weight with that smaller profile barrel
Thanx for this video. But could you crearly say which triger is best for just you- Tumney or Jard. You've tried both. Me- not either and I'm thinking which to buy. Thanx more in advance for you direct answer.
Hard question. For prs and nrl im sticking with the timney. For f class or bench shooting the jard
Josh. Is that a sako quad in the background? Will you be making videos on a quad. Big shame no chassis available for quad as would be a good nrl option. Thanks
It is a sako quad. To be seen shortly on the channel
Josh, have you tested the ki precision barrel for a B-14R?
I have not. Hadnt heard of them but will check it out
I am considering ordering one after seeing your video. Did you install it your self and is the any problems that you have experienced with it? I have a very limited budget so I would like to know that I am not going to have issues with this trigger before I purchase it. Thanks and keep the videos coming, I watch every one of them.
I installed it. Very simple to do and no issues. They have it set from the factory so its 1 bolt and the e clip to remove the pin and it drops right in.
thanks for the reply I think that I am going to order it with in the next few weeks
Light trigger! Desperate for some advice. I often have cases eject and hit the area 419 rail and then bounce back into the chamber. Is there any way to fix this? I know you have solved many .22 issues. Would really appreciate a response. 🤘🏻👌🏻
Hmmm not that i can think of short of swapping the holder out.
Hello, very nice !!!
Where did you get this trigger ?
I have a CZ457 thumbhole too
Thanks thanks ❤
From jard triggers
Ok I’m confused. There is an over travel adjustment on the trigger. I’m confused why there is so much travel. Did you not adjust screw 8# for over travel?
I did adjust 8b overtravel. Its just the design of the trigger as far as I can tell.
Good thing they have 3 pull weights the 3-7 is not practical I have been shooting my Anschutz 1710 with a 5 ounce pull weight and is too light I still have unintentional discharges a pull weight of at least 8 ounces is better
Thats all a matter of perspective, use case, and training. I shoot 4 ounce triggers up to 10 ounces in prs
Another Great Video 💯💥💥💥💥💥💥💥💥💥💥💥💥💥💥
Not shipping in Europe 😢
That sucks
This is off this subject but I wanted to ask you a question. I can't afford 3 or4 hundred dollars for a bipod. I can afford somewhere around a 100 bucks. So, the question is what bipod would you recommend for around 100 bucks? I shoot a Bergara off a bench mostly.
Might could find a harris on sale for 100 ish
Great Review
Shame they don't do it for the 452
Out with the welder for. The Kyl
Lol
Will it be compatible with CZ 457 MTR Varmint?
With any 457 variant
What rear bag do you like to use.
Gamechanger pint size
Drop test?
Did you do any adjustment to trigger?
I played with it to see what the adjustments did but ended up back how it came set from factory
Which tract model is that scope? Thank you!
Its the toric 4-25
@PursuitofAccuracy Jesus you got money. 😂
@@bad_vaporizer had money.......past tense 🤣🤣
PIRCE POINT DIFFERENCE BETWEEN THE TWO?
Exactly the same, 179
$192 for the Timney as of 1/1/2024. Jard is still at $179.@@PursuitofAccuracy
What barrel is that and was it a drop in?
Its a drop in. Cant quite talk about it yet. But all will be revealed soon
@@PursuitofAccuracy Kenny?
@@jonathanseal5155 i cant say
Can you say now?😜😜
too light for me, set mine at 10oz
What is the preset on a 3-6 oz hard trigger ?
Mine was at 3 oz when it came to me
want 😮
*need* fixed that for ya brother 🤣
That is riduculous.... yes please...
😳
😁