В детстве располовинил от Ковровца коленвал потом кувалдой собрал , рихтовал уже в картере что бы не цеплялся,кореш сказал что если он заведется то съест 3 ботинка и 2 фуфайки. Смеялись потом год он так и не начал есть,а мот что до разборки 90 валил что после те же 90 .Что с одним что с тремя всё равно 90. Только хорошие воспоминания о этом мотоцикле. 82 год.
This video was made by a guy's mom for TH-cam and she said he was in a bad motorcycle accident and suffered severe brain damage and since then he just likes to turn this drive shaft around and around. He has no intentions of fixing it and in fact is so brain damaged that he doesn't even know what it is.
In 1993 I was a student living in Italy. Same year an American, Doug Polen, was winning the world Superbike Championships on a Ducati. That, and the fact that I speak Italian, got me into the factory, and a foreman gave me a tour. I saw a very similar method being used at that time on brand new Monster engine twins.
in this work you sure need to. have a very strong foresight and imagination, i know one kid who did a crank similar to this and got it right in 3 attempts only, bro keep on practicing and someday you'll be better 👍
CAN appreciate everything about this! Do I completely understand it?! More than likely not, it's also extremely satisfying to see Old School methods still existing. Absolutely fucking love it!!! Keep bringing these old school methods to light. We're going to need them sooner rather than later.
@@benkrom2737 the counter weight is way too small. The only single they had was a lady sportster back in the he day that they made into induri/dirt bikes. I have a Harley crank sitting in my garage and it is tons larger. I'd say this is for a little 80 cc dirt bike most likely.
Умиротворённое занятие ))😅 Раз 10 посмотрел и понял,что моя нервная система ,,ни к чёрту" ....так как ,если ещё посмотрю минут 5 , то следующая станция : ,,Палата √6"...😅😅😅
I came here after watching this for days on end to see if he would finally get it balanced, only to stay longer and laugh my ars off at the comments! ..😏🤨🤔
Usually draw or scribe a line along where the crank splits - the put one end in a lathe and steady, the other end bring together with the tail stock - on said line and it will be close 😊
Since 2000 yr later, the crank shaft is unbalanced 😂😂😂😂 Le grand child’s grand child: hamare jo dadda ji the unke dadda ji ye chhor ke mare the unse ye sidha nahi ho paya isliye ab hum isko sidha kar rahe hai😂😂😂
Siri, how long does it take to straighten a crankshaft? Siri: It's impossible. TH-cam videos have looped for hours and have been unable to straighten a crankshaft successfully.
Pomen ini dh mula mengeetuk sejak umur beliau 15 tahun, sampai sekarang umur dia sudah 55, dia masih mengetuk benda yg sama.. dijangka. 20 tahun lg baru siap utk dipasang pd moto😂
Take you some all thread cut it the same length as the gap on the balancer have two nuts on the inside of the all thread rewind the two nuts out until it is balanced might take a little bit of heat wood help just a pro tip save you from having to beat on the balancer
5 hours look at this still unbalance😂
Ya benar, karena ini di ulang ulang🗿🗿😂😂
please definitely not balanced it's been trying to straighten the shaft I said straighten the shaft
it took a week to complete

On the fifth crankshaft I realized that they were all out of balance
Cierpliwość!
Смотрю два месяца.Мастер,не останавливайся,я верю в тебя :)
😅
He's still going at it lmao
😂😂😂😂
😂😂
Разрывное )))
Можно смотреть вечно на три вещи...-- огонь,..воду,.....и рихтовку коленвала !))
Собственно, что мы и делаем...😂
а какой смысл его рихтовать так? если он от ударной нагрузки вернется в исходное положение.
Центровка и балансировка.
@@miajibl4534если бы так было, все мотоциклетные коленвалы делали бы литыми, а не разборными!
Jajajaja jajajaja 😂😂😂
I've been watching for 5 days now and he still trying to get it straight.
Lol
Same😂
Lol
U gotta watch till the end. When u see a dog run by in the background, u know ur close.
Ho'oh, sama.... ampe budeg juga gak lurus2
legends say: he is still aligning that
I believe he's bending it the other way now.
😂😂😂😂😂
😂😂😂
😂😂😂😂😂👍
😅😅😅😅
I've been watching this for almost an hour, not realizing it was a loop.
Igualmente kkk
Everytime I think he's got aligned, it's still just a little bit off. 👿
Passei pelo mesmo problema.
Dacă îl montezi la locul lui se centrează
Welcome to my world 😅
The problem is that after I knew I had fallen into the trap, I kept watching
Well said lol!!
we've been had bros 🤣🤣🤣🤣
maybe we were exoecting something good after all
😂😂
🤣🤣🤣
И аз😂😂😂
I was 15 when he started and now my grandchildren watch....it's become a legend, a myth they will pass down through the generations...
You're too FUNNY! 😅😢😂
Your joke was better than his!😂
😂
😂😂😂😂
🎉
В детстве располовинил от Ковровца коленвал потом кувалдой собрал , рихтовал уже в картере что бы не цеплялся,кореш сказал что если он заведется то съест 3 ботинка и 2 фуфайки. Смеялись потом год он так и не начал есть,а мот что до разборки 90 валил что после те же 90 .Что с одним что с тремя всё равно 90. Только хорошие воспоминания о этом мотоцикле. 82 год.
Boy that thing is still out of whack. He's been at it for 5 days!
😅😅😅😅
This video was made by a guy's mom for TH-cam and she said he was in a bad motorcycle accident and suffered severe brain damage and since then he just likes to turn this drive shaft around and around. He has no intentions of fixing it and in fact is so brain damaged that he doesn't even know what it is.
У мастера огромное терпение, смотрю уже 3 часа как он пытается найти баланс 🦾
😂😂😂😂😂😂
При определенном навыке довольно быстро все проходит
Да мастер так себе конечно: вчера пол дня ровнял. Сегодня зашёл глянуть как дела: он всё ещё ровняет!🤦🏼♂️
@@Hajohman 3 месяца прошло, все еще ровняет!
Im high asf right now and I mustve watched this 25+ times hoping he would get it
Did anybody else watch this video three times too? thinking he was actually on bending it 😂
We I it was five or six for me. I was on my first cup of coffee.
Acho que foi 10 vezes
Im still watching and waiting. Does it ever get straight ?
He's drunk, I'm drunk, all 188,000 PEOPLE liking this video are drunk 🍷🍻 whoooo weeeee!
It took me 5 "adjustments" to catch on.🤦♂️
Took me an 30 minutes to realize that this is a loop 😄
Está bueno ese comparador digital
Hahahaha😆😆😆
A solid five for me
I was blissfully unaware until I read your comment 😂
FUCK!!!!
In 1993 I was a student living in Italy. Same year an American, Doug Polen, was winning the world Superbike Championships on a Ducati. That, and the fact that I speak Italian, got me into the factory, and a foreman gave me a tour. I saw a very similar method being used at that time on brand new Monster engine twins.
I don't speak Italian, but about that same time we were replacing rods like this using a wood stove and a snowbank in Wisconsin
@@mikehoncho9344here in Montana we didn’t even have tools we had to use our hands 🙌
in this work you sure need to. have a very strong foresight and imagination,
i know one kid who did a crank similar to this and got it right in 3 attempts only,
bro keep on practicing and someday you'll be better 👍
U dont need any of wat ur saying because u go buy a new one u never do this esp this way. Its is not a good repair or one that will last.😂😂😂
Залипательно. Смотрю уже несколько часов 😂😂😂
Eu assistindo 20 vezes pensando que ia alinhar a qualquer hora
Сейчас ещё 500 штук подвезут 😂
Да когда-же он его выровняет?
He must get paid by the hour.
😅😅😅
Después de 2 años porfin lo logro , buenísimo el maestro , querer es poder 😄
CAN appreciate everything about this! Do I completely understand it?! More than likely not, it's also extremely satisfying to see Old School methods still existing. Absolutely fucking love it!!! Keep bringing these old school methods to light. We're going to need them sooner rather than later.
5 days later and he still hasn't got it right. Must be a Harley Davidson crank 😂
😂
Exactly 💯😂
There would be two rods then.
@@stevehensley5096 Not all harley-davidsons are V-twin. And V-twin only has one connecting rod journal 🧐
@@benkrom2737 the counter weight is way too small. The only single they had was a lady sportster back in the he day that they made into induri/dirt bikes. I have a Harley crank sitting in my garage and it is tons larger. I'd say this is for a little 80 cc dirt bike most likely.
Умиротворённое занятие ))😅 Раз 10 посмотрел и понял,что моя нервная система ,,ни к чёрту" ....так как ,если ещё посмотрю минут 5 , то следующая станция : ,,Палата √6"...😅😅😅
After watching it two times I realized that this is just a simple trap. 👍 great job
Rumor has it he's still balancing it...
Я уже спать лёг, вы мне напишите, он там поправил?🤣 Шёл 3 год, как он правит молотком, кривой коленвал😂
It's an endless loop.... it never got straight 😮😮
You won't straighten it out with caresses!
Who said perpetual motion is impossible? This is now my desktop background.
😂😂😂
I think it is possible with liquid metal and high power magnetic fields. and angler motion
This guy looks so innocent and has a lovely heart
This technique takes a lot of patience, my grasshopper
いつ直線的になるのかって永遠に見てたよ
Видеоряд и жульничество в одном флаконе😅
Cómo perder las esperanzas en la ferretería cuando preguntas y responden "No hay".
軸じゃなくでクランク軸
主軸よりクランク軸
I came here after watching this for days on end to see if he would finally get it balanced, only to stay longer and laugh my ars off at the comments! ..😏🤨🤔
Im glad that i am not the only slow one that watched it for several minutes waiting for it to be balanced. lol
Я смотрел 30 минут и ждал пока он его выпрямит, 😂 это ловушка работает
You can do it, believe in yourself 🔥🔥 we are all counting on you🙏🏻
As a pedestrian, I can confirm that this crank is bent.
The more he straightens it out the more crooked it gets! LMFAO 😂
Didn't realize it looped so quickly, I was all, 'This is gonna be an all day project Duude!' 😂
Huhhhh ... I fell for it... Waiting for that balance like crazy not knowing that I watched it till 1 hour ....yet still unbalanced.... You got me! 😅
Well y'all got me for 2 or so minutes of my life
Vai dá certo irmão, eu acredito em você, continue tentando...😂😂😂
"Oh to hell with it! Its near enough! ( might vibrate a bit, but never mind!)" 😂
Might want to look for another block that came out of!!
А можно ничего не править а поставить его на ручной асфальтоукатчик.
Imagine ...The force of 1 power stroke is almost equals to 10 strokes of hammer and guy is aligning this with his whole heart..😅
Расскажите у него получилось выровнять?
Вот ждем
Есть слухи что он до сих пор его правит.
Как же я тебя искал умник , твоего кома , аж нехватало .
Need crankshaft replacement...time consuming effort to no avail😢!!! Use lathe machine for speedy alignments needed 😅
And that kids is how you end up with a broken crankshaft.
Lol what?
3 days later 😮 the metal is now fatiged and crankshaft breaks in the center destroying the block
😊😊😊😊
He only did it once though.....😂. This WHOLE video is 12 seconds long..... You got fooled.
Hahahaaaa
Oh look it works it goes round and round. GOOD JOB!!!!
Machinist: “How many thou of runout she got?
Helper: “yes”
Legend say he is 95 years old and still at it
The longest vid I watch 'til now😂
I believe a new technique is in order.
bigger hammer
Legend says that this dude still hammering that sh*t and wont balance lmaoòoo
Пятый час смотрю, а он всё его выправить не может.
He's getting closer each time I swear!
Essa live tá demorando demias ja ronduas horas aqui e nada de desempenar😅!
😂😂😂😂😂
Он может думает что эта деталь заведётся и везёт его???? 😂😂😂😂😂
You find dial tools finished problem of the world 😂😂
Калинвал :👁️🤏🧄🥑🌐🎲🎬🧾🧮💼
아따 크랭크샤프트가 휘어 버렸네잉
It never got better…but it did trick me into watching it twice!
I sat and watched this video until I fell asleep and woke up in the morning. I still haven't finished watching it.
Devo prendermi ferie per guardare questo video 😂
Glad I'm not the only one who watched this more times than they'd ever admit before realizing its fkin looped lmfao
Терпение, мой друг, терпение и ваша щетина превратится в золото!
Damn…. Watched way longer than I should have. Nice one!
Straight up had me 💯 for at least 3 solid minutes 😂
I watched this 5 times thinking he was testing multiple cranks until I paused to check the video progress
Am I the only one who thinks they’ve been watching this very short clip on repeat for the past 10 minutes?
Критики , Вы не знаете , ЧТО ЭТО и за чем . А вот тем кто этим занимается ОЦЕНИЛИ ПРОСТОТУ ПРИБОРА 💯🤠👍
I sent my crankshaft to this guy 25 years ago and he said its not quite ready yet.
Там подшипник восьмёркой бьёт ! Пакистан стайл😂😂😂
Usually draw or scribe a line along where the crank splits - the put one end in a lathe and steady, the other end bring together with the tail stock - on said line and it will be close 😊
Since 2000 yr later, the crank shaft is unbalanced 😂😂😂😂
Le grand child’s grand child: hamare jo dadda ji the unke dadda ji ye chhor ke mare the unse ye sidha nahi ho paya isliye ab hum isko sidha kar rahe hai😂😂😂
Siri, how long does it take to straighten a crankshaft?
Siri: It's impossible. TH-cam videos have looped for hours and have been unable to straighten a crankshaft successfully.
Pomen ini dh mula mengeetuk sejak umur beliau 15 tahun, sampai sekarang umur dia sudah 55, dia masih mengetuk benda yg sama.. dijangka. 20 tahun lg baru siap utk dipasang pd moto😂
I watched this about 20 times before I realized it was on loop.
Its been over an hour i am watching this thinking it will get fixed. 😂
I been watching since last Christmas 🎄🎁 gave up, bought a second hand engine.
Looks like a bent stemwinder there Clark!
Ive been watching this for like 5 minutes not realizing it was a loop
Сделай поперёк тонкую риску в широких местах коленвала, а после уже распресуй, и при сборке не ошибёшься даже на микрон.
Looks like the crank on my 06 88 in twin cam !
Left me stranded in Southern California!
1200 miles from home
It took me a half hour before I realized this was a loop. I thought he was just bending the crankshaft back a little at a time.
I was waiting for it to straighten out not realizing I'm watching the video over n over.
Take you some all thread cut it the same length as the gap on the balancer have two nuts on the inside of the all thread rewind the two nuts out until it is balanced might take a little bit of heat wood help just a pro tip save you from having to beat on the balancer
I watched this video 5 days ago, today again I come to see if the unbalance problem is solved. 😂😂😂
Мне даже страшно посмотреть как будет работать этот мотоцикл. если так отбалансировать
This should be the new Life Alert Commercial
I hope my phone does soon... I've been watching for an hour now.
Keep going, It’s almost there
Говорят, что все пытаются настроить, только уже родственники пробуют, так как его не хватило на пару дне. :)
Когда ты его поравняешь сколько смотреть можно
Небыло бы этого спец-гвоздя я бы сказал что ровно! Спец-гвоздь пушка
По молодости на Минск переприсовывал , по линейке быстро, благо у щёчек торцы равные😊
Len yarım saattir izliyorum düzelecek diye tam video alsaydı ya😅
Gotdam, he’s been at this for hours and he just can’t get it! 😂
You should show this to Mr Tweed, he's working on a BSA crank like that one.
Was that a KIA or HYUNDAI crankshaft ?
I want to see how he is holding it, how he is supporting it, and where he is striking it
Слышал что этот мужик до сих пор балансирует этот коленвал...
How many does he have to do before he gets a break. I've counted over 5000 already. Man o man.
That looks like an amazing weld... :p
Сколько не меряй кривой коленвал, ровнее он не становится)