Great video, and thanks for the detailed review. What stabilizer is on your bow? And, how do you like it? I am looking to upgrade my sight and stabilizer. Thanks!
Cool video. I just picked up an accutouch site. I have my dovetail bar further out, but the peep has the site housing in full view. As I start dialing in my distances will I have an issue with yardage? My bow speed is probably around 250 fps. My scope housing is attached to the top of the delrin elevation bar. I’m only looking to shoot from 15-60 yards, but if I can get more yardage that will be ok!!! Thanks, Sean
Yardage depends on many different factors, FPS of bow, sight housing distance (further away less gap, but harder to stabilize), peep height adjustment, arrows etc. Play around with it, if you’re not getting the yardage you want, adjust peep height
I was torn between that sight and the Option 8. I eventually went Option 8 because I felt I could get more yardage out of it. Like to know your arrow speed and what yardage your sight will drop to. I'm shooting a 31.5 VXR 31in 70lb 463gn @295 and my max yardage I can move to is 121yards Thankyou Great video
I'm looking hard at this one or the accuhunter. I believe you can get either configured with the single pin or multi-pin. I've shot archery for a while but have never hunted with them and hope to give it a shot in the 2021 season. I like the idea of a single pin for target shooting. In a real world application, how well would a single pin work for hunting? Or, do you think a three pin would be a better option. Concern for hunting is to be able to change the distance on a single pin. Guess I could always but a second scope or even sight but that's a lot of dough.
@@GeLeeOutdoors Great points, thanks for the response! I may have been overthinking it but I too would likely be shooting out to a distance no more than 30-35 yards. I like the idea of setting the pin at some intermediate range, practice to see what the offset is, then aim for that offset.
Great video! I'm currently running a spot hogg fast eddie xl and was thinking of changing to this due to weight. I saw that you switched from CBE for the same reason - would you say you say your bow overall felt significantly lighter after switching over?
@@gohardfast he actually did respond, not sure why it disappeared.... but he basically said yes every ounce matters. I personally recently made the switch about a month and a half ago - if you held both sights together side by side you will definitely notice that the Spot Hogg is heavier. However, when I was shooting my bow it honestly didn't feel as much lighter as I hoped it would. That being said, one interesting thing that I noticed was that when I switched to the Axcel sight, the sight reduced vibration on my bow which was a pretty big unexpected plus. Hope that helps.
Not sure where my comment went, but it is lighter. I did notice in weight carrying the bow in general. I walk 1 - 1 1/2 miles to my hunting spots, and saving every ounce counts in my book
I did not notice any vibration noises when I switched. I have heard of possible loose screws causing vibration noises, I’ve heard more of this on the CBE than the Axcel
How does moving your sight in and out make your bow faster or slower🤣🤣🤣 the adjustment is for diffrent magnifications on your scope you move it out to get more magnification!
Great, you show us the product and its details very close. Thank you.
Thanks to your vid, I did a little more research and found that they updated their Accustat II scope. I'm pulling the trigger on one of these now.
Great video, and thanks for the detailed review. What stabilizer is on your bow? And, how do you like it? I am looking to upgrade my sight and stabilizer. Thanks!
Thanks for posting this on Mathews Brotherhood I really appreciate it. I’m definitely looking to buy one this week
Yes sir
Cool video. I just picked up an accutouch site. I have my dovetail bar further out, but the peep has the site housing in full view. As I start dialing in my distances will I have an issue with yardage? My bow speed is probably around 250 fps. My scope housing is attached to the top of the delrin elevation bar. I’m only looking to shoot from 15-60 yards, but if I can get more yardage that will be ok!!! Thanks, Sean
Yardage depends on many different factors, FPS of bow, sight housing distance (further away less gap, but harder to stabilize), peep height adjustment, arrows etc.
Play around with it, if you’re not getting the yardage you want, adjust peep height
Thanks for the review I’ll it helped me huge
Hey I like your bow setup...is that stone or ambush green?
Did you have any problems with the larger diameter sight housing being partially obscured by your riser?
I was torn between that sight and the Option 8. I eventually went Option 8 because I felt I could get more yardage out of it.
Like to know your arrow speed and what yardage your sight will drop to.
I'm shooting a 31.5 VXR
31in 70lb 463gn @295 and my max yardage I can move to is 121yards
Thankyou
Great video
@@GeLeeOutdoors any idea what fps your shooting?
The term for those clicks are detents. Very nice video. Just baught one. Thanks for thr info.
I need a left hand sight. Is the Axcel a real lefty or just a upside righty?
I'm looking hard at this one or the accuhunter. I believe you can get either configured with the single pin or multi-pin. I've shot archery for a while but have never hunted with them and hope to give it a shot in the 2021 season. I like the idea of a single pin for target shooting. In a real world application, how well would a single pin work for hunting? Or, do you think a three pin would be a better option. Concern for hunting is to be able to change the distance on a single pin. Guess I could always but a second scope or even sight but that's a lot of dough.
@@GeLeeOutdoors Great points, thanks for the response! I may have been overthinking it but I too would likely be shooting out to a distance no more than 30-35 yards. I like the idea of setting the pin at some intermediate range, practice to see what the offset is, then aim for that offset.
what size
peep do you use? nice vid.
Great review. I like that bow sight.
What do you recommend, .010 or .019 pin?
Have you found a good case for the 28? Also need a good range finder if you can recommend!
Where did you find a good deal on it?
Hey where did you find the torque ring? Can’t find em anywhere in stock.
Lancaster Archery
I bought it last year
Just curious, How many pounds are you pulling? And where at in Wisconsin?? I’m in central about an hour north of madison
What are you filming on I love the content and year around passion 🙏🏻
How does it compare to the CBE? What are you using the site for? Hunting? 3D? Target?
How do you like it so far? I want to hunt with it.
Great review man. Why have you switched from the cbe to the axcel?
Thanks keep the videos coming🤘🏻
Great review.
I really like that site I been looking at those would like to find one for sale from some one used though
What magnifier did you get for the Accutouch Carbon Pro sight?
@@GeLeeOutdoors OK thanks for reply. But in your video, you mentioned you installed a magnifier on the sight. May I ask where you got that one?
hey is that the x41 and 0.19 pin size?
@@GeLeeOutdoors thanks :) happy shooting
Great video, thanks!
Great video! I'm currently running a spot hogg fast eddie xl and was thinking of changing to this due to weight. I saw that you switched from CBE for the same reason - would you say you say your bow overall felt significantly lighter after switching over?
it would be nice he replied to your question cause I was thinking the same waiting on an answer
@@gohardfast he actually did respond, not sure why it disappeared.... but he basically said yes every ounce matters. I personally recently made the switch about a month and a half ago - if you held both sights together side by side you will definitely notice that the Spot Hogg is heavier. However, when I was shooting my bow it honestly didn't feel as much lighter as I hoped it would. That being said, one interesting thing that I noticed was that when I switched to the Axcel sight, the sight reduced vibration on my bow which was a pretty big unexpected plus. Hope that helps.
Not sure where my comment went, but it is lighter. I did notice in weight carrying the bow in general. I walk 1 - 1 1/2 miles to my hunting spots, and saving every ounce counts in my book
I did not notice any vibration noises when I switched. I have heard of possible loose screws causing vibration noises, I’ve heard more of this on the CBE than the Axcel
@@alanbugsbunny thanks for replying I have a CBE and thinking about getting this sight thanks again 👍
How does moving your sight in and out make your bow faster or slower🤣🤣🤣 the adjustment is for diffrent magnifications on your scope you move it out to get more magnification!
I meant to say, moving your sight inward will decrease pin gap, moving it outward will increase pin gap
Nice sight. Good video.
What happen to the fast Eddie
Outdoors Junky ow nice I just got one and watched your video on the sight tape hack the other day. what sight do you like best?
Nice setup brotha🤙
Great video.
Great review. Wish I could afford it. 😂
👍
You can tell someone watches Chris Bee!!! Haha
@@GeLeeOutdoors i have the exact same bow and sight. But my bow is od green with black limbs, orange and od green strings.
Do you have Facebook?
I do but I don’t give that out