Messerschmitt BF-110E

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ก.ย. 2024
  • First part of the build. There will be 4 parts in total, and full build at the end of the process.
    This video include detail steps for the cockpit assembly.
    Kit of German WWII twin-engine heavy fighter aircraft Messerschmitt Bf 110E. Plastic parts: Eduard, marking options: 5- decals: Eduard- PE parts: yes, pre-painted- painting mask: yes- resin parts: no
    The Messerschmitt Bf-110 is a German twin-engine heavy metal fighter with a double tail. The engines used were Junkers Jumo 210Ga, Daimler-Benz DB 601B-1, Daimler-Benz DB 601F, Daimler-Benz DB 605B-1 engines with power from 700KM to 1475KM. The first prototype of the Bf-110 took off in May 1936. The first mass-produced version of the Bf-110 was the C version, which production started in 1939. Version C was regarded as a heavy fighter and performed on average in the September campaign, but much better in the French campaign. However, too heavy and too slow, the Bf-110 suffered considerable losses in the Battle of Britain, which meant that it was systematically moved to the Reich Defense units as a night fighter, which eventually led to the creation of the G and H versions. They were used as night fighters and interceptors against allied bombing expeditions. In combination with the on-board radar (eg FuG 202 or FuG220), the Bf-110 became a very formidable enemy for British bombers. About 5,800 copies of this aircraft were manufactured in the course of production. Technical data (version Bf-110C): length: 12.3 m, wingspan: 16.3 m, height: 3.3 m, maximum speed: 560 km / h, rate of climb: m / s, maximum range: 2410 km, maximum ceiling 10500 m armament: fixed - 5 7.92mm machine guns and 2 20mm MG FF cannons.
    Music: Bensound
    License code: UNLS9CG4IQPF6MXT
    Royalty Free Music: Bensound.com/royalty-free-music
    License code: CJXPDL9TLP3XZML2

ความคิดเห็น • 40

  • @eddywells5689
    @eddywells5689 29 วันที่ผ่านมา

    Amazing build it wasn't until the photos I realised how much work you put into this 🍺💞👍👍👍💪💪💪

    • @modelfun
      @modelfun  29 วันที่ผ่านมา

      Thank you;)

  • @sergio_grez
    @sergio_grez ปีที่แล้ว +1

    This is it! At last I find someone that paints the parts before asembling them!!! Lot of people assemble everything and then spray it to after badly paint the details with a brush like control boxes, radio boxes, etc. I believe this is the correct way to build, and the most realistic one. This is the attention to detail that stands out! Amazing work, definitely the best I've seen on youtube.

    • @modelfun
      @modelfun  ปีที่แล้ว

      I'm glad you like it. Thanks for kind words 🙂

  • @lesthiele4921
    @lesthiele4921 ปีที่แล้ว +3

    The build is looking fantastic so far, you have done a excellent job, looking forward to the next update, best regards from Australia 👍👍👍

    • @modelfun
      @modelfun  ปีที่แล้ว

      Hello Kiwi from Australia :). Thank you for watching. I hope the next stage will also turn out well. Greetings!

  • @normansmith8184
    @normansmith8184 11 หลายเดือนก่อน

    That, as we say in my neck of the woods, is proper nice. As natural as I would expect it to be. Nice sir. Respect from England.

    • @modelfun
      @modelfun  11 หลายเดือนก่อน

      Thank you for watching and leaving the comment 🙂

  • @glenflanderka6504
    @glenflanderka6504 ปีที่แล้ว

    Great job. Thanks for sharing.

    • @modelfun
      @modelfun  ปีที่แล้ว

      Thank you for watching and leaving the comment. I'm glad you like it. :)

  • @hammmodjabeer7278
    @hammmodjabeer7278 ปีที่แล้ว +1

    amazing

    • @modelfun
      @modelfun  ปีที่แล้ว +1

      Thank you for watching and leaving the comment 🙂

  • @paulbryson1692
    @paulbryson1692 ปีที่แล้ว

    well done ive still got one from 2008 started building it In Glasgow SUDDENTLY had to come back to London the next time I was up in Glasgow all the parts were mixed and missing was my own fault for not stashing them securely so i have another hope it goes together like yours really good sometimes i think i enjoy watching as a surrogate build

    • @modelfun
      @modelfun  ปีที่แล้ว

      Thank you for watching and leaving the comment 🙂

  • @Duececoupe
    @Duececoupe ปีที่แล้ว

    You just popped up on my feed, watched, liked and subscribed....looks fantastic! 👍🏻👌🏻👏🏻

    • @modelfun
      @modelfun  ปีที่แล้ว +1

      Thank you. Next part will come soon, I Hope in two weeks the latest. Thanks for watching and subscribing.
      Cheers 😀

    • @Duececoupe
      @Duececoupe ปีที่แล้ว +1

      @@modelfun
      Awesome....I'll be looking forward to see it! 👍🏻
      You're most welcome! 🤜🏻🤛🏻

  • @SMAZVidoes
    @SMAZVidoes ปีที่แล้ว

    Nicely done

    • @modelfun
      @modelfun  ปีที่แล้ว

      Thank you. :)

  • @russemerson4872
    @russemerson4872 ปีที่แล้ว +2

    Great job so far.
    I've built this kit. It's a generally pretty good, except for the fit of the engine nacelles (which are absolutely horrible) and trailing edge of the wing. Don't let it discourage you.

    • @modelfun
      @modelfun  ปีที่แล้ว +1

      Thank you for watching, and for the warning. I will pay attention to it, your comment confirms what I saw on YT and completed builds, I don't think Eduard eliminated the fitting problem with this release, so I will have to face it. Hopefully, the result will be OK :)

  • @bobhupandown1471
    @bobhupandown1471 ปีที่แล้ว

    fantastic

    • @modelfun
      @modelfun  ปีที่แล้ว

      Thank you. :)

  • @georgetaylor5433
    @georgetaylor5433 ปีที่แล้ว

    Beautiful build and there seems to be no fit issues ? Thanks.

    • @modelfun
      @modelfun  ปีที่แล้ว

      Thank you. Inside there was no fit issues, later it wasn't so good :)

  • @kgripen757
    @kgripen757 ปีที่แล้ว

    Great work! - what type of tweezers do you use?

    • @modelfun
      @modelfun  ปีที่แล้ว +1

      Thank you. I use fine art FA-510 - rather fragile tool. Second one is the pink Laiwang ESD-12. I took it from my wife and they are quite good. :)

  • @theblytonian3906
    @theblytonian3906 ปีที่แล้ว

    I have Eduard's 2014 release Profipack of 8203. The 2023 reissue of 8203 in the new Gold Profipack livery box is still the best Bf 110E out there AFAIC, if undeniably challenging to build. All of Eduard's Bf 110s are.

    • @modelfun
      @modelfun  ปีที่แล้ว +1

      Thank you for watching and leaving the comment. By challenging you mean the fit, complexity, or small elements? So far I have enjoyed the build, despite a lot of tiny parts in the cockpit that after all will not be visible :). However, I saw a few builds on TH-cam and I read that the later stage may be hard as the wings and engine nacelles do not fit well.

    • @theblytonian3906
      @theblytonian3906 ปีที่แล้ว

      @@modelfun Complexity, all that glazing and "small elements". Beautiful build though.
      The Bf110 is a particular favourite of mine as it was the workhorse which bore the brunt of the Reichsverteidigung against the RAF Terrorflieger night offensive. Also a sterling Zerstörer workhorse in the East & Mediterranean.
      I have Eduard's Bf 110C/D "Adlertag" Limited Edition, Bf 110E Profipack & Bf 110G-4 Profipack all in 1/48, so guess I'm rather a type afficionado.

  • @lotnylotny671
    @lotnylotny671 ปีที่แล้ว

    Bardzo dobry wybór, samolot który zawsze mi się podobał, szczególnie z tą wściekłą osą namalowaną na dziobie. Mam tez dobrą monografie odnośnie Bf-110 z wydawnictwa Kagero gdzie są zdjęcia tej maszyny.
    Zatem czekam z niecierpliwością na wideo z gotowym messerem.

    • @modelfun
      @modelfun  ปีที่แล้ว

      Dzięki :) Jeszcze nie zdecydowałem jaką wersję będę robił. Ta osa rzeczywiście wygląda super, ale widzę ich bardzo dużo. Może jednak ten z jamnikiem? :)

    • @lotnylotny671
      @lotnylotny671 ปีที่แล้ว +2

      @@modelfun Ja bym poszedl w osę 😀, ale znalazłem tego jamnika w planszach barwnych.
      Samolot z oznaczeniem bocznym 1B+LX, z 13 (Z) JG5. Pilot Oblt. Ziegenhagen. Malowanie górnych powierzchni RLM 74 Graugrun i RLM 75 Grauviolett. RLM 76 Lichtblau od spodu i boki kadłuba.
      Jest jeszcze jeden rysunek z tym jamnikiem z JG5. W styczniu 1942 jednostka stacjonowała w Malmi, Finlandia.

    • @modelfun
      @modelfun  ปีที่แล้ว

      @Lotny Lotny tutaj ten pudełkowy egzemplarz z psiakiem to I.(Z)JG 77, Lt. Felix-Maria Brandis Malmi, Finland 1942. Dzięki za referencje do kolorów- zawsze mam z tym problem jak chodzi o Luftwaffe.
      Osa jest bardzo efektowna, ale tak sobie pomyślałem, że trochę za dużo jest już tego motywu, a poza tym od 2 miesięcy mam szczeniaka w domu i tak jakoś mi bliżej do tego psiaka na dziobie :)
      Pozdrowienia.

    • @lotnylotny671
      @lotnylotny671 ปีที่แล้ว

      @@modelfun Jedno jest pewnez napewno będzie cieszył oczy... oby nie wpadł w oko psiakowi. Mnie kiedyś taki mały pupil zdewastował kartonowy model okrętu 😂😂.

    • @modelfun
      @modelfun  ปีที่แล้ว

      Mam nadzieję że do tego się nie dobierze. ;) Zamknę go za szybą na wszelki wypadek:)