Screw Pump Design
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2024
- To design an effective screw pump device (Archimedes screw), designers have to work within external constraints, including: i) Radius of the screw's outer cylinder, ii) Total length from the bottom to the top and iii) Slope of the screw pump.
Free - Creo Elements/Direct Modeling Personal Edition www.ptc.com/go/modelingpe - วิทยาศาสตร์และเทคโนโลยี
It's popularly called an Archimedes screw, but it may have been in use a few centuries before Archimedes was born, to irrigate the garden at Sennacherib's palace in Nineveh in the 7th century BC.
@YousefAB I can't speak for them, but I find that it's not a bad transition.
For the record, six times in nearly four minutes, and that's only if you count the opening and closing credits, is hardly every two seconds...
Great video but I wish you would have at least shown one archimedes screw in operation.
th-cam.com/video/MVH3f-POCFs/w-d-xo.html
★Awesome Report Thank-you!
This channel would be so good if the dropped those lame jokes...
Tell me you wouldn't like a nacho cheese pump right to your mouth?? ;-)
@@stephanevermette5645 bruh, drooling rn
nice keep going in good work
subscribed! nice channel
good video
Permit to download for my study. Thanks
Its Archimedean. Archimedes is the man
what about making electricity, like they are doing today
im here from a science project. wish me luck
This is an Archimedes screw. Use PTC Creo. The End.
@YousefAB They're the people behind these videos.
국내 업체 가르쳐주세요
wow.. why not lift water without bypass by welding the screw sections to the inside and outside tube.. the entire assembly will then be much more efficient . it could reduce power consumption needed to lift water in california aquaducts by 95% where they are only lifting water 30 to 100 feet . as long as the entry point is not totally submerged so only 35 to 40% of the screw is filled.. it won't flow over like a siphon . easily replaced screw into the sections vacuum breaks could also be installed. also.. so water could not leak out when the vacuum break is below the water level. but when its above it could let air in.. either a flapper or a ball in a cage could be used..
multiple sections could be arranged on mountain sides in a zig zag pattern to go over the mountain.. with covered ponds between. reverse turbines could recoup the energy going down the other side.. this would be so much more efficient than the giant pumps currently used to lift water out of the san joaquin valley for southern california. one of those lifts is probably 3000 feet vertical at the southern end of the san joaquin valley. the water pumps use more than 1/3 of the electrical output in california.
Should have used Archimedes screw to pump up their brain
٪٪٪٪٪٪٪٪٪٪٪٪٪٪ ممتاز
Advertisement warning.
Drop the guy, he destroys the professionalism of the video
Take a dam HCI course and learn how to use the correct colors for subtitles, thanks.