Regenerative Organic No-till Farming

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ธ.ค. 2024

ความคิดเห็น • 58

  • @CultureTripGuide-HilmarHWerner
    @CultureTripGuide-HilmarHWerner 2 ปีที่แล้ว +20

    it's great you are showing all the steps, but some explanation of what is happening in each step is absolutely needed! you want to get people on board who do not yet understand everything about regenerative agriculture or even agriculture in general!

    • @teunlll
      @teunlll ปีที่แล้ว

      I don't think you can decide who is his target group

  • @65LB
    @65LB 3 ปีที่แล้ว +15

    Onscreen information or the process being shown would really make it worth watching

    • @janbroekhuizen5
      @janbroekhuizen5 3 ปีที่แล้ว +3

      Second that, some machines look very specialised and most likely hard to find. Some explaining what they do would be a great help.

  • @hanksfarmvideos
    @hanksfarmvideos 3 ปีที่แล้ว +7

    We have an organic dairy farm here in Wisconsin and I enjoy seeing how you're trying new things. Very neat to see!

  • @jordannarlock7995
    @jordannarlock7995 3 ปีที่แล้ว +7

    i wish there was an explanation of each clip and step

  • @Dolesan
    @Dolesan ปีที่แล้ว

    Top shelf farming bro. Gives me hope.

  • @frontrangesoil
    @frontrangesoil 3 ปีที่แล้ว +3

    You're doing great work here, keep it up.

  • @larrymagill5422
    @larrymagill5422 3 ปีที่แล้ว +1

    I have a organic farm in north central Oregon. I have been in a pasture rotation with cattle and horses for the last five years. Need to go into a rotation of a small grain crops with a cover crops. What is the best cover to use before the small grains. We don’t raise soy or corn as there is no local market to sell into. All of the ground is irrigated. Love your videos you are doing what I want to do!!

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว

      Thanks for the support! You could always grow a small grain like barley wheat rye ryegrass, whatever grows out there that could survive the winter, harvest it in the early summer and then put out a mix to graze cattle on in the summer, then another small grain crop in the fall. You would basically have covers year round then. Indiana is different than Oregon though

  • @riderofnature5023
    @riderofnature5023 3 ปีที่แล้ว

    Nice job!

  • @jamesvantine3308
    @jamesvantine3308 ปีที่แล้ว

    What did you run to make the tall standing weeds die?

  • @declanjoyce8640
    @declanjoyce8640 3 ปีที่แล้ว

    Good job!

  • @marinlorre5207
    @marinlorre5207 3 ปีที่แล้ว +1

    Nice shots ! What is the liquid fertilizer tank on the planter used for ?

    • @teunlll
      @teunlll ปีที่แล้ว

      Liquid firillezer

  • @victorvillalobos1352
    @victorvillalobos1352 2 ปีที่แล้ว

    Hey bud, I have corn and want to plant papaya. How to I change out the corn crop after Garcés without damaging the soil.
    Thanks

  • @martinvidal1946
    @martinvidal1946 ปีที่แล้ว

    5:46 what is the name of that machinery?

  • @lsfamer2011
    @lsfamer2011 3 ปีที่แล้ว +1

    Love your videos! Realy good! Can you say us how the Corn Yield is? greetings from Germany!

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว

      Thanks for watching them and enjoying them! This was our first year planting corn into alfalfa, so we are still learning! With that said the yields weren’t amazing, but we did see anywhere from 130-150 in spots. We will hope to see better results next time we do it!

  • @TheJomar1998
    @TheJomar1998 2 ปีที่แล้ว

    Which machines are following the roller crimper and what do they do? I am from Germany and I never saw something like that. Have a nice new year

    • @farmingwithcarp8551
      @farmingwithcarp8551  2 ปีที่แล้ว

      We have 3 machines that could follow the roller crimper. They are all used for weed management. First is the rowmow, it is used to cut the weeds between the rows. Second is the inrow roller. It is used to roll weeds to terminate them. Third is the weed zapper. It is used to terminate weeds that are above the canopy of the crop. All depends on the situation for which tool is needed.

  • @mitchellcasey4171
    @mitchellcasey4171 3 ปีที่แล้ว +1

    Can you explain where you get all of your nutrients from for the crops

    • @w8stral
      @w8stral 3 ปีที่แล้ว +1

      1) He explains in other video's or look up videos by his father in law Rick Clark regenerative Ag 2) Short answer: Cover crops, and soil health since non tilling, no salts added, and no herbicide/fungicide/insecticide which kills all the micro organisms which fix the nutrients for you.

  • @NextLevelFarmerDotCom
    @NextLevelFarmerDotCom 3 ปีที่แล้ว

    Why do you crimp after planting instead of before planting? Who is the manufacturer of your crimper?

    • @farmingwithcarp8551
      @farmingwithcarp8551  2 ปีที่แล้ว

      I&J Manufacturing on the crimper. We like to crimp after because we roll the beans and the cover crop. Rolling the bean at V2 hurts the apical bud, the plant the stacks nodes and branches out instead of just going vertical. Has worked for us.

  • @bk-ch7rs
    @bk-ch7rs 3 ปีที่แล้ว

    How did u get along with the new model lexions? any likes or dislikes. Much improvement with new design.. ?

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว +1

      We got along great with the new lexions. Lots of like, a few dislikes. I will have a video on this! Huge improvements over the previous 760 we had.

  • @thaneschaffer6678
    @thaneschaffer6678 3 ปีที่แล้ว

    I have not seen all of your videos so I don’t know for sure but if the few I’ve watched are you a part of Rick Clark’s farming operation? I’ve seen a few of his presentations on not till organic farming and this looks really similar.

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว

      You would be correct!

    • @thaneschaffer6678
      @thaneschaffer6678 3 ปีที่แล้ว

      Awesome-I am a young farmer going down the road of regenerative farming on our Illinois farm and Rick is a great inspiration to me. I enjoy the videos and the further insight into you guys operation-keep up the good work!

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว

      @@thaneschaffer6678 thanks for the support. Glad to see you are going down the road of regenerative farming

  • @ViciouslyFish
    @ViciouslyFish 3 ปีที่แล้ว

    Do you have any issues with planting into that thick of cover with the planter? Have you had much issues with germination? We've been no till here in KS since the 90s but haven't done much covers.

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว

      Great question. We don’t have any issues planting into the thick cover. We have a few things on our planter that help with cutting through it. As far as germination we always see good stands year after year.

    • @ViciouslyFish
      @ViciouslyFish 3 ปีที่แล้ว

      @@farmingwithcarp8551 Maybe a video showing planter setup 😉? Or maybe you have one already...

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว +2

      @@ViciouslyFish that video will be coming out this month once we drag the planters out. Stay tuned!!

  • @darallsnyder8789
    @darallsnyder8789 2 ปีที่แล้ว

    Do you find that a roller will kill alfalfa good enough?

    • @farmingwithcarp8551
      @farmingwithcarp8551  2 ปีที่แล้ว +1

      No roller will kill it, only set it back just a little. Alfalfa is a tough crop. Good ol molboard plow will do the trick though!

  • @abramziegler4960
    @abramziegler4960 3 ปีที่แล้ว

    He Eric , another fine video! I just watched PFI TH-cam called Economics of soil health & cover crops, by Rick Clark. Your farm?

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว +1

      Yep, all the same farm!

    • @abramziegler4960
      @abramziegler4960 3 ปีที่แล้ว

      @@farmingwithcarp8551 Thought there were too many similarities! Especially the "row mower", lol.

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว +1

      @@abramziegler4960 haha yes. Hard to come by too many of those!

  • @lukashilgendag8883
    @lukashilgendag8883 3 ปีที่แล้ว

    Great video, what are you doing for your npk fertility management? Do you have any livestock? Thanks

  • @sylvannewswanger48
    @sylvannewswanger48 2 ปีที่แล้ว

    What cover crop do you plant before corn?

    • @Adam-bw4lw
      @Adam-bw4lw 2 ปีที่แล้ว

      It realy depends what you had beffor,make sure that the carbon-nitrogen ratio is right

  • @damienbrun2751
    @damienbrun2751 3 ปีที่แล้ว

    What row spacing do you use for corn ?

  • @11T872
    @11T872 3 ปีที่แล้ว

    1:43 boot stage?

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว

      Correct.

    • @11T872
      @11T872 3 ปีที่แล้ว

      ​@@farmingwithcarp8551 Do you remember how much days passed until you rolled rye?

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว

      @@11T872 we like to roll our beans between v1-v2. 2-3 weeks later this past year.

    • @11T872
      @11T872 3 ปีที่แล้ว

      @@farmingwithcarp8551 I'm watching some video about CC and stumbled on one that says the seeded 160 (kg per ha) = 142.748659 pounds per acre of rye...is that realistic of even possible to plant in that in spring?

    • @farmingwithcarp8551
      @farmingwithcarp8551  3 ปีที่แล้ว

      @@11T872 we planted 150 lbs of rye into our fields this last fall and will plant into it this spring with no issues. If this is what your asking then yes it is possible.

  • @MeetBushe
    @MeetBushe ปีที่แล้ว

    This video is pointless. I came here looking to understand no-till equipment. Now I just wasted time looking at a video that added no value at all