*_Just now, I've plugged in my Zero 10X 52V 23AH electric scooter to it's charger. The charging brick has green light. After plugging the charger to the scooter's socket, the charging brick's light is still green. It should turn red meaning it's charging. What does this mean? Thanks._*
Hello. I need help. I have a zero 9 scooter that won't take a charge. My scooter sat for awhile without use and the battery dropped to 21.6V, I removed it and had it checked out and the technician was able to charge it up to 51V. I took it for a ride and when I tried to charge it the charger stayed green. The battery is reading at 46.3V currently and the screen shows the battery is halfway. I tested the charger itself and is pushing out 54.6V which tells me the charger is fine. When I plug the charger to the scooter it turns green showing me that the battery is powering the charger, then when I plug it into the wall outlet it just stays green when it should be red. I tried opened up the scooter again to try and find the fuse, but I don't see one. I've tried to research it and can't seem to find any information on whether or not this Zero 9 has a fuse. Please kindly provide some insights below to help determine the problem and how to fix it. Any help would be much appreciated. Thank you! 1. Do you know if my scooter has a fuse? 2. If so where is it located? 3. Is there a reset button to reboot the scooter? 4. What could be the issue it won't take charge when I witnessed it first hand take on a charge when the technician attached his battery charger to increase the BMS to 51V? Reply
I have one of these chargers it’s supposed to output 72v to charge my scooter but it only outputs 62v and it barely charges my scooter do you know how to fix this?
Bro just bought a city coco and the charger is not working but the bike seems to only charge half full but now the charger is not working hopefully is the charger
I have a hyper racing scooter 2000w 48 that when you turn it on goes from fully charged to e in less than a second. What could be causing this? How can we repair it?
Check battery bms temperature sensor, maybe from vibrations temp sensor wire go damaged or broke, atleast this what battery bms does with not working temp tensor. Ofcourse with such limited info there could be anything wrong, but that would be my first try, well atleast check if battery all groups are at good voltage range 3-4,2v each of 14 groups if its 48v battery.
Why doesn't my fan turn on my charger tonight when I plug my scooter into the charger but it turns red? There used to be a fan noise on the charger. Is the charger working?
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
*_Just now, I've plugged in my Zero 10X 52V 23AH electric scooter to it's charger. The charging brick has green light. After plugging the charger to the scooter's socket, the charging brick's light is still green. It should turn red meaning it's charging. What does this mean? Thanks._*
Same with me but for a e bike
How do you check to know if your battery is dead
I have a charger but i still isn‘t working… ehen you put it in, it just blinks for 1 sec red, then it goes off? What do I need to do?
i have same problem, but i dont see him answer any questions here. I keep looking 😭
I like that voltage board you made.
do you have a video on how you made it?
what parts do I need to make one?
/Bklyn👑
Mine doesn't light up anymore I think I rewired it the wrong way round is there any chance to repair the charger
Hello. I need help. I have a zero 9 scooter that won't take a charge. My scooter sat for awhile without use and the battery dropped to 21.6V, I removed it and had it checked out and the technician was able to charge it up to 51V. I took it for a ride and when I tried to charge it the charger stayed green. The battery is reading at 46.3V currently and the screen shows the battery is halfway. I tested the charger itself and is pushing out 54.6V which tells me the charger is fine. When I plug the charger to the scooter it turns green showing me that the battery is powering the charger, then when I plug it into the wall outlet it just stays green when it should be red. I tried opened up the scooter again to try and find the fuse, but I don't see one. I've tried to research it and can't seem to find any information on whether or not this Zero 9 has a fuse. Please kindly provide some insights below to help determine the problem and how to fix it. Any help would be much appreciated. Thank you!
1. Do you know if my scooter has a fuse?
2. If so where is it located?
3. Is there a reset button to reboot the scooter?
4. What could be the issue it won't take charge when I witnessed it first hand take on a charge when the technician attached his battery charger to increase the BMS to 51V?
Reply
I have this problem too, I'm not tech savvy so I don't know how to fix it, let me know what you find.
I have one of these chargers it’s supposed to output 72v to charge my scooter but it only outputs 62v and it barely charges my scooter do you know how to fix this?
What did you do?
@@chojuj4533 took it apart and theres a little screw that adjusts the output voltage and we turned it until it was at 72v again
@@adhdproductions3989 Thanks for the reply after so long hahaha, my charger is doing the same today. Outputs 52v when it should output 58,8v
Hello i have 72v charger I accidentally contacted wrong polarity blow up the Fuse I changed the fuse but still not working
Do you know how many amp is it the single bell of the battery
Bro just bought a city coco and the charger is not working but the bike seems to only charge half full but now the charger is not working hopefully is the charger
I have a hyper racing scooter 2000w 48 that when you turn it on goes from fully charged to e in less than a second. What could be causing this? How can we repair it?
Check battery bms temperature sensor, maybe from vibrations temp sensor wire go damaged or broke, atleast this what battery bms does with not working temp tensor. Ofcourse with such limited info there could be anything wrong, but that would be my first try, well atleast check if battery all groups are at good voltage range 3-4,2v each of 14 groups if its 48v battery.
My charger also 60v ...can i extend my 1 meter dc wire into 10 meter?
You will get a voltage drop after 5 meter
I have a 60v 2000w battery on my electric scooter I’m hearing it’s lead, is it possible to replace this to lithium I pay you a few bucks on PayPal
jmsu
Why doesn't my fan turn on my charger tonight when I plug my scooter into the charger but it turns red? There used to be a fan noise on the charger. Is the charger working?