Don’t rub it in Michael! 😂 Going into our new planting season it has become a nice addition for scratching surface soil and working our dirt for hilling. Hope you enjoy yours as much as we do.
Great looking tiller! One reason I never got hooked on the rear tine tillers is that I can't seem to turn it quite as sharply. With my front tine tiller I just push down on the handle and turn it as tight a turn as I want. The second reason is that for a front tine tiller I can, again, just push down on the handle and adjust the depth (and strength of it pulling me forwards!). But those are personal preferences. Garden is shaping up now!
Reverse tine is best for first few passes. Forward tine is best for last pass. To smooth out the path. Hang on tight when it's in Forward tine. If it hits a rock or hard spot;;; it can jerk it out of your hands and tip over. 😊😊😊
Trust me, I know all about the bucking bronc ride on the Forward gear. It surely will take off with you (or without you). 😂 More great insight. Thank you. Cheers!
That tiller is the exact same design as, Husqvarna, Cub Cadet, Yardmax and Yardman. When your soil is loose you need to till forward and set your depth to hold it back. Counter rotating tilling is really meant for harder compacted soils. You’re working yourself to death. Once you figure it out let the tiller do the work for you. I’ll agree 10 on kubota tractors but a 5 on the RTV🤣
I just get one yardmax YT4565 from Rural King and this tiller is a Beast Breaking ground that never treated before and is was cutting everything in her way like a champ
That tiller is identical to my sears craftsman tiller. After a replacement tiller because the first one wouldn't run. Carburator wouldn't pass any fuel , instead of a new carb I received a different tiller . The second one has had no trouble in 7 years
No complaints so far from me, Dennis. Mine has been running smoothly now for a few seasons and I am pleased with the performance and dependability. Most of the issues I have had (as seen in the video) are user error. :) Thanks for comment. Have a good one!
Great video and very informative. Just found your channel while web-surfing for a rear-tined tiller. I will probably go for the smaller DR CRT. One reason for selecting a DR is that there is a service center just down the road from me in Lacey's Spring Al. If you are in Somerville we are practically neighbors! Thanks again for the video.
If a tiller comes with bolts holding the wheels on; replace them with locking circle clips from TSC. Bolts will break too easy. The shifter on this one will loosen up over time. It's better to bump the shifter when changing gears.
Thank you, Don. Ours does as well. The manual indicates the filler port to the back should be used. I had no clue as to why, so I mostly followed directions. :) Truth be known, I filled 2/3 using the rear port and topped it off in the front. And I agree, the front is much easier. Have a good one.
Hey Roger. The tines have held up well in my soil. Although I have sandy loam and not hard red clay. The machine is durable and once I figured out how to effectively use the forward and reverse tine movement it has been a solid tool for the garden.
Hey MicroUrb. After spending more time working with this machine it is performing really well. Obviously over the next few months it will get run through its paces for another season. But so far, I am very pleased with the operation and results of this tiller. Good luck!
I have not had much use behind the troy-bilt. I know they are very dependable tools. At least equitable in terms of durability and the engine is comparable. I would not hesitate to recommend the DR.
I'm having a little trouble with the set up... in the manual the illustrations don't have the parts number. Like I'm just to screw the spring washer to the bolt hole...
Check online. You may find your answer with someone who has posted it previously. I’m glad to try to help but I’m not sure which part you’re referring. If it is the depth arms you attach the spring through the bolt and to the little black handles. If that is not the right spot let me know and I’ll try to see how it looks on mine and help you out. And yes, the manual was fairly useless!
@@TheLittleOrchardFarm Thank you. I think I figured it out. After starting it up the back cover started coming apart & lost the screw. I didn't know that it had to be tightened as it arrived that way.
No. But if you are cutting checks, I’ll send you my address. 😀 This is a totally independent review and I can report the longer I worked with the tool the better it performed - or should I say the better I performed with it.
![เจ็บที่ยังฮัก - ม่อน วรวิทย์ [ Official Mv ] จอนนี่มิวสิค](http://i.ytimg.com/vi/KALIGSRSjFs/mqdefault.jpg)
Had mine for two years, no problems and is a beast!
Yes sir! It's a good machine.
Just got mine. Sorry about your startup woes. Mine fired on the second pull and ran great.
Don’t rub it in Michael! 😂 Going into our new planting season it has become a nice addition for scratching surface soil and working our dirt for hilling. Hope you enjoy yours as much as we do.
Great looking tiller! One reason I never got hooked on the rear tine tillers is that I can't seem to turn it quite as sharply. With my front tine tiller I just push down on the handle and turn it as tight a turn as I want. The second reason is that for a front tine tiller I can, again, just push down on the handle and adjust the depth (and strength of it pulling me forwards!). But those are personal preferences. Garden is shaping up now!
Great points. It is a bit janky to turn it for sure. The jury is still out on whether I really like this machine. But I'll keep trying.
Reverse tine is best for first few passes. Forward tine is best for last pass. To smooth out the path.
Hang on tight when it's in Forward tine. If it hits a rock or hard spot;;; it can jerk it out of your hands and tip over. 😊😊😊
Trust me, I know all about the bucking bronc ride on the Forward gear. It surely will take off with you (or without you). 😂 More great insight. Thank you. Cheers!
That tiller is the exact same design as, Husqvarna, Cub Cadet, Yardmax and Yardman. When your soil is loose you need to till forward and set your depth to hold it back. Counter rotating tilling is really meant for harder compacted soils. You’re working yourself to death. Once you figure it out let the tiller do the work for you. I’ll agree 10 on kubota tractors but a 5 on the RTV🤣
Great advice. Where were you last week. 😂 at least I’m getting in shape! Thanks for sharing.
@@TheLittleOrchardFarm Your welcome 🤗
How can the DR tiller reach down 11 inches when the Yardsman can only do 6 1/2 inches when they both have 13 inch tines ?
I’ve had no issues with my new tiller. It works fine.
Great to hear! Happy gardening!
Nice tiller.👍👍🇺🇸
Thanks 👍
Looks good. Hope i can find something alike in my country
Good luck!
I'm in the market for a tiller. There are so many affiliate reviews out there. Thanks for an honest review.
Your are welcome, Ken.
I just ordered the Earthquake Victory Rear Tine Tiller, did extensive research, waiting for delivery. See a recent POST, or not.
I just get one yardmax YT4565 from Rural King and this tiller is a Beast
Breaking ground that never treated before and is was cutting everything in her way like a champ
Good stuff! Nothing like finding a piece of equipment that makes you happy. Thanks for sharing. Cheers!
I’m looking for a tiller, my picks Honda, but there really expansive, I wanna stay with Briggs and Stratton, definitely
That tiller is identical to my sears craftsman tiller. After a replacement tiller because the first one wouldn't run. Carburator wouldn't pass any fuel , instead of a new carb I received a different tiller . The second one has had no trouble in 7 years
No complaints so far from me, Dennis. Mine has been running smoothly now for a few seasons and I am pleased with the performance and dependability. Most of the issues I have had (as seen in the video) are user error. :) Thanks for comment. Have a good one!
Great video and very informative. Just found your channel while web-surfing for a rear-tined tiller. I will probably go for the smaller DR CRT. One reason for selecting a DR is that there is a service center just down the road from me in Lacey's Spring Al. If you are in Somerville we are practically neighbors! Thanks again for the video.
Awesome, thank you! Pass through Lacey Springs almost daily. Good luck with your DR, neighbor. :)
Earthquake has 5 year warranty
Bit of hose pipe and funnel take care of that Brian. When that thing set off and dragged you with it I thought the next clip would be ER.
It had a bit of giddy-up in her!! LOL!
If a tiller comes with bolts holding the wheels on; replace them with locking circle clips from TSC. Bolts will break too easy. The shifter on this one will loosen up over time. It's better to bump the shifter when changing gears.
Great advice Alfred! Thank you!
Nice video. Mine has an oil filler port in the front AND the rear of the engine. Front is much easier to use.
Thank you, Don. Ours does as well. The manual indicates the filler port to the back should be used. I had no clue as to why, so I mostly followed directions. :) Truth be known, I filled 2/3 using the rear port and topped it off in the front. And I agree, the front is much easier. Have a good one.
@@TheLittleOrchardFarm I bet it's because the engine leans forward.
the little Earthquake is a funn body work out
I'm too old for that! I get a workout just getting out of bed every morning. Cheers!
@TheLittleOrchardFarm lol at 41 my body is falling apart as everything is stiffing up on me.
How sturdy are the tines ? I've always owned Troy belts but MTD owns them now. I'm looking for a new tiller
Hey Roger. The tines have held up well in my soil. Although I have sandy loam and not hard red clay. The machine is durable and once I figured out how to effectively use the forward and reverse tine movement it has been a solid tool for the garden.
Check out Earthquake Victory Rear Tine Tiller
Thank you! very informative.
You're welcome!
Different model from Lowe’s as a craftsman, same motor. The tiller is on the front and with the peg in the back it digs.
Still chugging along. This has been a nice little tiller. Once I got the hang of operating it. :)
Well done sir! You should trial a Power Dog next 😎
I could some stuff up with that monster brush cutter!
How is this rototiller working for your now? I am considering getting one.
Hey MicroUrb. After spending more time working with this machine it is performing really well. Obviously over the next few months it will get run through its paces for another season. But so far, I am very pleased with the operation and results of this tiller. Good luck!
Would you recommend it over a troy-bilt ?
I have not had much use behind the troy-bilt. I know they are very dependable tools. At least equitable in terms of durability and the engine is comparable. I would not hesitate to recommend the DR.
How much was involved in the actual setup when you receive the shipment
If I recall just attaching the handle bars was the only thing I had to assemble. Cheers!
I'm having a little trouble with the set up... in the manual the illustrations don't have the parts number. Like I'm just to screw the spring washer to the bolt hole...
Check online. You may find your answer with someone who has posted it previously. I’m glad to try to help but I’m not sure which part you’re referring. If it is the depth arms you attach the spring through the bolt and to the little black handles. If that is not the right spot let me know and I’ll try to see how it looks on mine and help you out. And yes, the manual was fairly useless!
@@TheLittleOrchardFarm Thank you. I think I figured it out. After starting it up the back cover started coming apart & lost the screw. I didn't know that it had to be tightened as it arrived that way.
What oil does it take? Thanks
Standard SAE 5W - 30 for cooler weather or SAE HD30 for standard use. You should check the DR Power website for additional information.
When the grease gets hot it will shift easier
Duly noted and you are correct. Over time it certainly loosened up. Thanks!
10:06, thanks for publishing this video. This is enough to convince my to NEVER buy one of those machines. Maybe I'll look at Troybuilt.
You're welcome. Good luck!
I can't decide between this one and the craftsman at my local lowes
I'm sure the Craftsman is a quality tiller. In my opinion you can't go wrong with either choice. Good luck!
Look into Earthquake Victory Rear Tine Tiller
Can’t beat a Troy Built.
I will not disagree with that. Whatever works and works well, right?
what is not to be sure about a tire that has a tube. Nothing is better than a tire with a tube.
I won't argue that point.
Is this a paid review?
No. But if you are cutting checks, I’ll send you my address. 😀 This is a totally independent review and I can report the longer I worked with the tool the better it performed - or should I say the better I performed with it.
dude, get some Starter Fluid,
I did. :)
Not impressed with the machine ... you also should have cut the grass with a deck mower ... But eventually it will dig some ground.
Agree on the grass cutting. The more I have used it the better it has performed. Probably user error. Cheers.