Thank you for the shout out my man! Love the set up at the office and sucks it has to go BUT, it’s so much nicer having it at home. To be honest that set up is KILLER! Nice job man!!
Bro, thank you for the videos. I litterally copying your setup. I already ran my 240v 30amp plug to side of my house. Ordered the same exact shed on amazon for $425 to my door. You the man.
Awesome Mad Electron, maximum space efficiency bud, well done, both you and THM did well for the backyard space, first vid mate, see you around no doubt my man
You can’t do a partition in such a small enclosed space to separate your hot/cold zones, unless you add multiple of those exhaust fans behind it. You have 5x4x240cfm fans just in the octominers alone - meaning 4800cfm, which will create so much pressure in the hot zone it’ll just get forced back through any hole available, which includes vents in the cases and/or gpus themselves. Btw, that large of exhaust fan can’t work efficiently without active intake - it’s being starved essentially, and working against negative pressure
So let me see if I got this right. You got $30K in gpus in a $500 plastic shed in the back yard with zero room for air circulation. This should work out great.
Sorry you lost your COLO Room and cooling, I'll bet they wanted to start charging you for power, space and internet, I have seen this before in my DATA center. Things always change and a great idea and flexible business plan NOT to pay for space. More fans and more intake!! It takes more airflow than you think. Switch DATA center in the Las Vegas desert uses filtered outside air for their DATA center but the airflow is MASSIVE to cool the Blade Servers etc. Air Flow Air Flow Air Flow the more exchanges and the closer the Deta T the better. Measure the static pressure difference and adjust exhaust fan and intake openings as needed, put that engineering skillset to work! Try the roll of filter media filter thing like ChumpChangeXD and The Hobbyist Miner are doing in order to keep the water out (not too high a MERV rating or you will need 4 fans for exhaust due to static pressure differences), the airflow alone will bring water droplets into your Octominers due to sheer velocity. A Sheild inside may help with direct water droplets but increase the resistance of the airflow so the filters will be a better option I would think. Your goal should be the same Delta T as the Octominers for maximum efficiency but that is a long shot for sure - OR Same as your data center specs which was around 20 degrees. There is a challenge with the mini miners so My suggestion - The pink foam Board can be used to fill the space and use the thick square foam - like door seal (one side sticky) to create a seal and allow you to remove easily for rig access, service etc. Good luck and great video! Stay Calm and Keep Mining!
Have you done a shed build for your crypto miners? Leave any tips you may have down below! Thank you!
Thank you for the shout out my man!
Love the set up at the office and sucks it has to go BUT, it’s so much nicer having it at home.
To be honest that set up is KILLER! Nice job man!!
I will miss the office but I totally agree nothing beats having them at home.
"It Sucks!" Love it! Keep the content coming!
Very creative dude! love it
Bro, thank you for the videos. I litterally copying your setup. I already ran my 240v 30amp plug to side of my house. Ordered the same exact shed on amazon for $425 to my door. You the man.
Awesome Mad Electron, maximum space efficiency bud, well done, both you and THM did well for the backyard space, first vid mate, see you around no doubt my man
Good work, please keep us updated on temps
Love it! Thanks for sharing!
awersome project, just enough space love it
Looking amazing buddy!
Great job, thanks for sharing!.
GREAT LOOKING SHED!
interested to see if the baffles improve the shed temps
You can’t do a partition in such a small enclosed space to separate your hot/cold zones, unless you add multiple of those exhaust fans behind it. You have 5x4x240cfm fans just in the octominers alone - meaning 4800cfm, which will create so much pressure in the hot zone it’ll just get forced back through any hole available, which includes vents in the cases and/or gpus themselves.
Btw, that large of exhaust fan can’t work efficiently without active intake - it’s being starved essentially, and working against negative pressure
Looks Good.
Dude sick man!
So let me see if I got this right. You got $30K in gpus in a $500 plastic shed in the back yard with zero room for air circulation. This should work out great.
Another great video. Happy 4th of July.
Cool man. Lets get back to making money!
🔥🔥🔥🔥
Powerful?
With a 2500 cfm fan and less than 100 amps?
So you need to figure out how to use the heat from the rigs to grill some burgers...a win win
Lol if only.....
30k in gpus. $500 in shed. No problems there.
I would love to relocate my miners out of my workshop, it's too hot to work in lol
Far out amazing my brother
they're raritan 5496V PDU's. Kinda hard to find on eBay right now.
Sup RICK
Sorry you lost your COLO Room and cooling, I'll bet they wanted to start charging you for power, space and internet, I have seen this before in my DATA center. Things always change and a great idea and flexible business plan NOT to pay for space.
More fans and more intake!! It takes more airflow than you think. Switch DATA center in the Las Vegas desert uses filtered outside air for their DATA center but the airflow is MASSIVE to cool the Blade Servers etc.
Air Flow Air Flow Air Flow the more exchanges and the closer the Deta T the better. Measure the static pressure difference and adjust exhaust fan and intake openings as needed, put that engineering skillset to work!
Try the roll of filter media filter thing like ChumpChangeXD and The Hobbyist Miner are doing in order to keep the water out (not too high a MERV rating or you will need 4 fans for exhaust due to static pressure differences), the airflow alone will bring water droplets into your Octominers due to sheer velocity. A Sheild inside may help with direct water droplets but increase the resistance of the airflow so the filters will be a better option I would think.
Your goal should be the same Delta T as the Octominers for maximum efficiency but that is a long shot for sure - OR Same as your data center specs which was around 20 degrees. There is a challenge with the mini miners so My suggestion - The pink foam Board can be used to fill the space and use the thick square foam - like door seal (one side sticky) to create a seal and allow you to remove easily for rig access, service etc. Good luck and great video! Stay Calm and Keep Mining!
Sup buddy
if you stand on the other side it blows too 🍜🍜🍜🍜🍜
only you would come up with that retort!!!!
Hm, what about the noise? Your neighbours will complain soon 😀
lol not yet.