The V-turn is amazing and so stable. I'm on my second one now. Pilot error on the first one but that's the beauty of 3d printed planes you can just print another. Thanks for sharing.
Very nice videos,I want to ask you if you can build an inertial plane, or specify points for the plane to follow using GPS? Thank you for the valuable and useful information. 🎉❤
As an owner of a Bambu A1 Mini, with it's 180mm bed, which is a very popular entry level printer, I'd love to see some more attention given to the minimum bed size most of these planes take. I frequently get excited about a plane, only to find it needs a minimum 200mm bed size.
Model aircraft designs are generally for 200mm and above due to technical reasons. The dimensions of many models require this. You may need to split even a single wing piece along the vertical axis to make it smaller. This is not very practical or desirable.
Nice planes and I love the Super Tucano. What kind of Receiver you put in it and was it stabilized? Actually what kind of receivers you put in all of them ?
I usually use Radiomaster receivers. But for small models I use Flysky micro receiver. For B-25 I used Hitec Optima 9. No Stabilizer (Gyro). All Manual control.
Selam abi ben de v913 model 4 Kanal Bi helikopter var 7.4v pili Ben bunu hangi klasik motor taksam yanıyor kuyruk kısmına O yüzden kuyruk kısmında fırçasız yapmayı düşünüyorum Hangi model bir motor önerebilirsin 7.4v için
Almost no 3D printed airplane is for beginner unless you're okay to rebuilt almost after every landing. Beginners make a lot of mistakes and hard landings. Model S is a nice glider but it's fragile, requires understanding and setting up flaps, possibly crow, and makes it harder to land, which definitely removes it from beginner real for me. Actually the video shows how it wasn't even landed on the piste even though i has wheels for a piste.
Merhaba bende 3d ile bir rc uçak tasarlamayı düşünüyorum eğitici videolarınız bana çok fayda veriyor bir alıcı verici kumandaya ihtiyacım var başlangıç için bir kumanda önerirmisiniz
RC uçak uçurmak ile ilgili kapsamlı bir video hazırlar mısın? Beş yıl önce uçurmaya çalıştığımda sağlam bir kırım yaşamıştım. O günden bu yana hobiye küsmüş durumdayım.
As I mentioned in the video, normal PLA. This Cessna 152 is a very old design. When the 3D files were prepared, LW-PLA had not yet been invented 🙄. Therefore, it is not suitable for LW-PLA. Since it is a large model (wing: 152cm), weight is not a problem. On the contrary, it provides a more realistic flight experience. And it is less affected by the wind. The wing-body support connections of this model are very important. You must fix them firmly.
Thank you for your kind and thorough explanation. This is good news: regular PLA is more robust than lightweight one… very important for a beginner 😁 And it happens I have a couple PLA spool lying around.
@@Kendin-Yap Thank you for yoyr kind and thorough answer. This is good news! not only regular PLA is more robust than light one - very important for a beginner, you know... It happens I have a couple spools lying around 😉 I wish you a happy new year, ciao!
@@gianfranconicola8645 Detailed settings for slicers are shared in the "help" section of the 3dlabprint website. I also benefited from that information.
Fouga (4S) 10 bıçaklı. Genel 10 bıçaklı EDF lere göre çok daha güçlü (Dr. Mad 70 EDF) olduğu için sesi çok. L-39 ise 6S ve 12 Bıçaklı FMS Pro. Çok daha hızlı ama sesi çok daha az.
Merhabalar abi ben universitemde ekibim ile beraber iha hazırlamaya çalışıyorum bilgi birikiminden faydalanmak bizim için çok yararlı olur iletişime nasil geçebilirim sizinle
Why does the L-39 have Russian markings when it is a Czech aircraft? See the website of the manufacturer Aero Vodochody in the Czech Republic. Otherwise, great models, congratulations.
Hürkuş'u Hürjet'i veya İHA'larımızdan birini görürüm diye sonuna kadar bekledim. Ama hiç birini göremedim. Sanırım emek verip tasarlamak yerine, hazır çizimi alıp basmak daha kolay geliyor.
The V-turn is amazing and so stable. I'm on my second one now. Pilot error on the first one but that's the beauty of 3d printed planes you can just print another. Thanks for sharing.
Great video and great info!! Thanks so much for sharing with us!! Also looks like you have a nice flying site!
These planes look fantastic, and nice filming as well!
Thanks, great video and editing, good pilot skills, nice looking 3D printing, love your work. Subbed 🇦🇺
awesome projects,
great!
I am your big fan and like all your videos😊
My favorite is Super Tucano❤😊
how fast is model s glider and how long the battery stay
daha çok böyle video istiyorum çok güzel olmuş
Very nice videos,I want to ask you if you can build an inertial plane, or specify points for the plane to follow using GPS?
Thank you for the valuable and useful information. 🎉❤
ขอบคุณครับ
As an owner of a Bambu A1 Mini, with it's 180mm bed, which is a very popular entry level printer, I'd love to see some more attention given to the minimum bed size most of these planes take.
I frequently get excited about a plane, only to find it needs a minimum 200mm bed size.
Why didnt you vuy a bigger printer of you want to print normal sized planes? Nothing in life is for free
Model aircraft designs are generally for 200mm and above due to technical reasons. The dimensions of many models require this. You may need to split even a single wing piece along the vertical axis to make it smaller. This is not very practical or desirable.
@@Kendin-Yap I'm aware, I'm simply pointing out a hole in this hobby and you are welcome to take it or leave it.
Your videos are amazing but Please don't use music kindly use the orginal voice of video.
Merhaba orta bütçeli hangi 3d yazıcıyı önerirsiniz uçaklar için
Nice planes and I love the Super Tucano. What kind of Receiver you put in it and was it stabilized? Actually what kind of receivers you put in all of them ?
I usually use Radiomaster receivers. But for small models I use Flysky micro receiver. For B-25 I used Hitec Optima 9. No Stabilizer (Gyro). All Manual control.
Great videos! What kind of on-board camera are you using?
Old version RunCam II 4K . New version.. s.click.aliexpress.com/e/_ok2JnGX
@@Kendin-Yap Thanks !!!
abim 3d yazıcı yapımı ne bilim cnc yapımı, lazer cnc yapımı videoları gelirmi
Very nice video 👍👍
Did you have the P38 from 3dlabprint ?
No i don't have it
Please make uav plane with 1400 kv motor and 8*4 propeller
Selam abi ben de v913 model 4 Kanal Bi helikopter var 7.4v pili Ben bunu hangi klasik motor taksam yanıyor kuyruk kısmına O yüzden kuyruk kısmında fırçasız yapmayı düşünüyorum Hangi model bir motor önerebilirsin 7.4v için
Almost no 3D printed airplane is for beginner unless you're okay to rebuilt almost after every landing. Beginners make a lot of mistakes and hard landings. Model S is a nice glider but it's fragile, requires understanding and setting up flaps, possibly crow, and makes it harder to land, which definitely removes it from beginner real for me. Actually the video shows how it wasn't even landed on the piste even though i has wheels for a piste.
Truly inspiring video!! Built our first 3d print and it flew like a rock. You don’t have trouble generating lift…. Switching to LW now…
Merhaba bende 3d ile bir rc uçak tasarlamayı düşünüyorum eğitici videolarınız bana çok fayda veriyor bir alıcı verici kumandaya ihtiyacım var başlangıç için bir kumanda önerirmisiniz
Burası neresi acaba pist çok güzelmis.. emeğinize sağlık :)
What about a quicke 500 remember that one 😊
RC uçak uçurmak ile ilgili kapsamlı bir video hazırlar mısın? Beş yıl önce uçurmaya çalıştığımda sağlam bir kırım yaşamıştım. O günden bu yana hobiye küsmüş durumdayım.
th-cam.com/video/zf1eud0LRKc/w-d-xo.html
I am thinking about building the Cessna 152 (absolute beginner RC pilot here). Did you really print it in regular PLA? Not LW-PLA or similar?
As I mentioned in the video, normal PLA. This Cessna 152 is a very old design. When the 3D files were prepared, LW-PLA had not yet been invented 🙄. Therefore, it is not suitable for LW-PLA. Since it is a large model (wing: 152cm), weight is not a problem. On the contrary, it provides a more realistic flight experience. And it is less affected by the wind. The wing-body support connections of this model are very important. You must fix them firmly.
Thank you for your kind and thorough explanation. This is good news: regular PLA is more robust than lightweight one… very important for a beginner 😁 And it happens I have a couple PLA spool lying around.
@@Kendin-Yap Thank you for yoyr kind and thorough answer. This is good news! not only regular PLA is more robust than light one - very important for a beginner, you know... It happens I have a couple spools lying around 😉
I wish you a happy new year, ciao!
@@Kendin-Yap May I ask you a bit of advice in slicing Cessna parts? Thank you.
@@gianfranconicola8645 Detailed settings for slicers are shared in the "help" section of the 3dlabprint website. I also benefited from that information.
There is no foam craft in our city Can I use polycarbonate as the body of the plane instead?
stl dosyalarını nereden bulabiliriz
Videonun altında açıklama bölümünde linkler var.
3. sırada ki edf 8 pervaneli mi hocam sesi baya farkediyor pervane kanatçık sayısı arttıkça gerçek jet gibi ses geliyor
L-39 muhtemelen 10 ya da 12 bıçaklı sanırım çok güzel sesi var
Fouga (4S) 10 bıçaklı. Genel 10 bıçaklı EDF lere göre çok daha güçlü (Dr. Mad 70 EDF) olduğu için sesi çok. L-39 ise 6S ve 12 Bıçaklı FMS Pro. Çok daha hızlı ama sesi çok daha az.
Ücretsiz stl dosyalarına nerden ulaşabiliriz
Linkler videonun altındadır. Ücretsiz olan sadece Piper modelidir. Bunlar lisanlı modeller olduğundan ücretlidirler.
هل تصميم طاءرة يمكن تحميله مجانا
Merhabalar abi ben universitemde ekibim ile beraber iha hazırlamaya çalışıyorum bilgi birikiminden faydalanmak bizim için çok yararlı olur iletişime nasil geçebilirim sizinle
Why does the L-39 have Russian markings when it is a Czech aircraft? See the website of the manufacturer Aero Vodochody in the Czech Republic. Otherwise, great models, congratulations.
Because it was also used by the Russians
Don't coding long range transmitter receiver using joystick making please❤❤
Hürkuş'u Hürjet'i veya İHA'larımızdan birini görürüm diye sonuna kadar bekledim. Ama hiç birini göremedim.
Sanırım emek verip tasarlamak yerine, hazır çizimi alıp basmak daha kolay geliyor.
Great choice, excellent #1. Well, except for the nomination. L39 is a Czech plane, why the ugly Russian stars?
Здесь нет политики, не напрягайтесь в ненависти к России. Просто авиамодели, про хобби, просто Россия - сильная страна