Tamiya TT-02B Project: Ball Bearings Speed Test & Drag Tests! (Episode 2B)
ฝัง
- เผยแพร่เมื่อ 21 ต.ค. 2024
- Speed Testing and Drag Testing a Tamiya TT-02B 1/10 4WD Buggy RC Car. Let's measure the top speed and acceleration of an almost stock unit with a fresh set of Tamiya ball bearings. Any faster than with the stock plastic bushings?
The ball bearing set was kindly sponsored by EuroRC, free for review and tests. They supply a great variety of different ball bearing sets and hop-up options for Tamiya models and many other RC cars. Check out their huge RC Car collection and RC parts here with this (non-affiliate!) link: www.eurorc.com
Use the code: justrc8
for a -5% on all normal priced products (valid until the end of the year)
The SkyRC GSM-015 and SkyRC GSM-020 were kindly provided by Banggood, free for review and tests. You can check out the specifications, prices and buy them here with these (non-affiliate!) links:
SkyRC GSM-015: www.banggood.c...
SkyRC GSM-020 (Bluetooth & App Controlled): www.banggood.c...
The Awanfi 2S 5000 mah battery was provided by Awanfi, free for review and tests.
The links and coupon code were provided by EuroRC & Banggood. I receive no money/pay/commission.
More info below!
Thank you for watching!
Check out my main RC channel, Nordic RC Visions, here: / nordicrcvisions
Check out my non-RC-channel, Nordic Visions, here:
/ @nordicvisions309
Please comment and like ... if you like! Subscribe and "Ring the bell" to stay notified! Don't miss out! All support is greatly appreciated!
Happy Hobby Days to you all and Keep 'em Running!
See you soon!
-----------------------------------------------------
Tamiya TT-02B Dual Ridge XB Stock Specifications:
Item no. 57876
Released in 2004
XB (Expert Built) Ready To Run Version of Assembly Kit 58596 from 2014
Body/Wing: Polycarbonate (designed by Takayuki Yamazaki from pdc_designworks)
Chassis: TT-02 Bathtub-type Chassis Frame w/ Buggy Suspension Set Up
Drive Line: Shaft-Driven 4WD
Scale: 1/10th
Length: 380 mm
Width: 250 mm
Height: 145 mm
Wheelbase: 266 mm
Tread: 217mm (Front), 208mm (Rear)
Square Spike Buggy Tires & Top Force Star Dish Wheels
Tire Width/Diameter: 32/82mm (Front), 41/82mm (Rear)
CVA Oil Filled Shock Units
Double Wishbone Suspension Front & Rear
Rigid non-adjustable upper arms & steering linkage
3-Piece Steering Tie-Rod
12x 1150 Plastic Bushings & 4x 1280 Brass Bushings
Front/Rear 4-Bevel Differentials
Steel Pinion Gear & Plastic Gears/Differentials
Stock Gear Ratio (17T pinion, 70T spur): 10.71:1
Electric Motor: Brushed 27T Type 540 Motor (Silver Can)
ESC: TEU-105BK 60A w/ BEC
Servo: TSU-01 Servo
Receiver: TRU-08 2.4G 2-channel
Transmitter: TTU-08 Finespec 2.4G 2-channel
Tamiya TT-02 Project Part 1: Stock Baseline GPS Speed Test 6S NiMH versus 2S LiPo: • Tamiya TT-02B Project:...
-----------------------------------------------------
#NordicHobbyVisions Statement:
This video features homemade footage of my own hobby-grade rated (+14y) #RCCar and #RCCars from my personal RC collection. All rights reserved.
Will wait for the next videos, love these honest minimal editing videos and detailed breakdowns. Take care.
Thank you so much! And sorry for the late reply. Been a while since I was in here with this channel. About to do some videos for it though.
Ahhh - I'm in waffling heaven, Mikael! And my ears are definitely still on! Long may the waffling continue here, mate! :O)
Ha ha, Waffling Viking RC strikes again 😅 Thank you my good friend ☺️
I think the really interesting thing is you can now measure acceleration with that new GPS device! It's really cool! I'm looking forward to seeing some more of your DualRidge, makes me want to take mine out for a spin soon, maybe already this weekend/Easter. Have a great one there!
Yeah, those features will come in handy in the future. Hope you had a great Easter with your Dual Ridge. Sorry for the late reply. Been too long since I was in this channel the last time. Got a few videos to edit for the channel though.
Just changed my pinion to 22t and full ball bearing and went 23mph on a 2s lipo. Motor and esc temps were very manageable as well. Nothing getting too hot. Plasma edge with tq tune brushed motor. Now have a 3900kv brushless motor and running 33mph. Thats about as power as this chassis can manage without too much stress its plenty fast now.
I remember having the TT02B. Stock pinion gear was very small. Definitely good gains to be had with gearing changes.
Yeah, comes with a 17T so a very low gear ratio (usual for Tamiya in these entry-level lines). Only good thing about it is that it is a steel pinion (which is unusual for Tamiya). Will definitely change the pinion to a 19T soon. And then start changing the spur which I think will allow a 27T pinion in the end.
The waffling Viking. Lol
😂
Nice test, i will miss your TTT´s and the waffling.
Thank you, Mattias! I will start waffling here again ☺️
Sweet ride here.✌️
Thanks, Luke!
Nice rc car :-D
Thank you 🙂
Yes a good morning waffling with my coffee :) As I wrench on a couple of new to me Tamiya's!! Just got a Manta Ray and finally got my hands on my holy grail Tamiya a original release 1992 Dyna Storm and it didn't cost me a arm or leg...lol Also waiting on 2 more buggies a Tamiya DT01 Mad Fighter and a VRX Spirit Pro Carbon Fiber!! I'll post them in the facebook group when I get them all together and running :) Looking forward to more waffling and seeing this project evolve. Hope you and the family are doing well my friend 🙂
Uhh, sounds like a super time. Always great to get models that one has never had a closer personal look at. Especially if it’s models that deserve the name holy grail. I bet it was a thrilling moment getting that Dyna. Congrats with all the new members of the car park. Would love to see your Dyna Storm. Would love to get my hands on a Dyna Blaster one day. Sounds like you got your hands full. Hope all is well with you and yours too, Chris.
you probably dont care but does any of you know of a trick to get back into an instagram account??
I was stupid lost my password. I would appreciate any tips you can give me.
@Gordon Bentley instablaster =)
@Dario Reid thanks so much for your reply. I found the site through google and Im trying it out atm.
Seems to take a while so I will get back to you later with my results.
@Dario Reid it did the trick and I now got access to my account again. I'm so happy:D
Thanks so much, you saved my account!
Nice video those plug adapter's melt when u upgrade the motor I stopped using them good luck 👍
Yeah, but as I mentioned they will be just fine for me with these first motor tests. No Tamiya plug melts with a silver or black can and a 2S 😅 When we go with higher RPM’s and voltage, the whole system (ESC and motor) will be changed. Here I usually use EC5 and IC5.
@@nordichobbyvisions719 ok I'm not a kid I have over 200 rc's over 100 tamiya's I got my first rc car in 1978. Any tamiya plug u put a 2s lipo on if your gonna run IT and I mean run a race the plug is gonna melt can motor or not so don't think u know it all because u don't I was just trying to be nice maybe u don't run your cars hard but when u do on 2s lipo tamiya plugs melt u can take that to the bank HAVE A NICR DAY 🙂
I use ec3s.
Ball bearing should also add some miles per hour to your top end.
Nope.
did you see that video of that guy who does crawling he had this cat he called orange he died last month it was a really sad video made me cry. I mean the cat died.
Ttt please lol.
ERC is run by a your kin Scandinavians fellow Vikings. Lol
Nope. They are Finnish. So Nordic but not Scandinavians or Vikings 🤭 But I’m also half-Finnish 🙂🙃
@@nordichobbyvisions719 well I know the finish used to be attached to Russia and then they got their independence from them but I thought that they more represent with the Scandinavians than they do the Russians.
Is this channel dead? :O
Almost 🙂 Many plans but not a lot of time 🙂
@@nordichobbyvisions719 Forget the other channel and do stuff here with WAFFLING!!!