ASM - Air Shift Module Functions and Programming Overview by Trevor Schnitz of Schnitz Racing
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Trevor Schnitz goes over the Air Shift Module Programming.
The Air Shift Module is a single solution for air shifter kits on motorcycle, powersports and off-road applications where a precise engine kill is required. Digital display, adjustable kill times per gear, auto-shifting and direct shift solenoid control allow the ASM to control all aspects of your air shift system.
Need a video pointing out exactly what wires go to what wires on the bike from the unit
Great video! Easy to follow and clear instructions!!
Great to hear!
After you program, everything in the module.. and you put it in auto shift.. I’m guessing you have to turn it back to the “on” position, correct ? And then it’s ready to take down the track?
Yes. You'll flip the switch back to the on position after the burnout. I'd suggest setting it for a low RPM and testing first. Then, go up in RPM.
I have a question, im gonna attempt to use this air shift module with a pingel electric shifter instead of an air shift.. my only concern is the purple and brown wire mentioned in the video, could I simply not hook those wires up to basically ignore the air part of the module? Everything will work fine otherwise just wondered if it can be used without those wires hooked up
Yes, the ASM can be used as an engine kill module only. You can leave the brown and violet wires disconnected (be sure to tape them up).
@@schnitz_racing I have a Harley with a pingle air shift , can this work just as a shift
Minder and no kill
Time .
Hi, can this be used on a 2015 s1000rr that has a factory fitted quickshifter just for autoshift? If so is there a wiring diagram?
Unfortunately we do not have a wiring diagram for the BMW. We have not installed one ourselves on the S1000RR.
A friend of mine used from 2008 gsx r 1000 on his 2017 bmw s1000rr
If you disconnect the battery, do you have to go back in and set anything or will it hold settings?
It will hold it
The Air Shift Module will hold it's memory and all settings if power is removed.
What all needs to be changed to use auto shift mode? Does the input polarity need to be changed? The previous owner of the bike was using the air shifter, but i want to use auto shift mode. It's a gen 2 busa bracket bike.
You just need to set the ASM to Auto Shift. That's it! Once in auto shift mode, you can select shift RPMs for each gear. Check/set those and you're ready to go.
@Schnitz Racing Where does the green wire lead to the previous owner said it may have disconnected or possibly broke. Tried auto shift mode, and after 1-2 shifts, it jumped real bad and almost felt like it upshifted.
Can I use with co2 shifter
Absolutely.