Hello Angel, I am a German fan of your channel and actually not because of the Harleys, but to understand the language the way you, as a normal woman, speak it.❤❤
Good morning 🌅 Angel, we have all noticed that you’re living in the moment, 😂, And yes it is that time of year winter 🥶 is approaching or in some cases it as arrived, 😱❄️☃️, Great to see Dad giving you instructions on the turn around, John Crash in, that reminds me I didn’t put my bike on the lift 🛗, before I had my op on my hand 🤚, I can not ride it for the next 3-4 months, not good for the bike to be sitting in one place for so long, flat spot on the tyres 🛞, have great week, we all 👀 forward to see you wrenching on your next bike project, 💔🥶from France.
If you get a small slide hammer, you can trap the head of the screw in its chuck and just bump the old seal out. Only have to drill one screw hole and it's done in just a couple minutes.
I've been told not to trust Temu tools but it would be hard to mess up a pry bar. Lots of uses with those! I do like the baby one. It will fit where many tools won't. We are pretty cold here too but my new furnace was installed yesterday so the shop is nice and warm. It is fun watching and listening to you mess around in your shop. You have a great sense of humor! Keep the videos coming!
Hi Red.. get a empty 90 wt.qt. jug and use that for filling transmission, primary and anything else you need to use a funnel for..just wash it out with a cup of gas or kerosene when changing different fluids....
Is like a house, never endind job. But in a Harley is fun to do it. And, you are Awesome.❣❣❣ and Beautiful❤😊😅, plus we always learn some . Thank you for your work. Much respect.
"Overhead supply" could be? your friend, especially considering time and motion implementation. See what ya reckon? Fluorescent tubes, (custom LED configurations these days), at right angles to the bench. 12v power feed of appropriate, (adjustable), amperage. Fuel and oil. (1 litre fuel feed, custom brass tank, preferably vintage, 1 litre 50 weight feed -> hang the bottle for gravity drain). Compressed air feed. 240v, (mains), feed. Suspend complete handle bar and triple tree assemblies above the machine as far as wiring will allow, 1 inch is enough. STRONG ratchet straps to do so. Drop fully assembled front forks WITH wheel, down and out to change steering head bearings... Etc etc etc. It's a lot of setting up but makes spannering a dream.
Temu has some kool stuff...like my long sleep pants. I had a tank once with dents...filled in with JB Weld and got some bullethole decals and put them on and sealed them with gloss polyurethane spray. That bike even won contests for best paint.
I agree.... no electric vehicles for me and the family. It is fun to pass the people in their electric vehicles in the T bucket and hit the throttle a little bit. The looks are amusing to say the least. Keeping the bikes and the T. It is fun working on them too.
Hello Angel...as far as transmission lubricant goes, Red Line Heavy ShockProof Gear Oil has a thickness greater than 75W250 but has a unique low fluid friction like 75W90. It's very good quality. Hi to you and yours. ✌️
Hello Angel, using Red Line Heavy ShockProof Gear Oil is the best way to pamper your gears, shifter clutches, mainshaft & countershaft, bearings and bushings etc. Your Transmission will shift better, will run quieter, and cooler. And...last longer. Yes it's just that great. Hi to you and yours. ✌️
Hey Angel it was good to see dad in the video tonight. Can’t wait to see what you guys come up with for the Dina stabilizer. Take care and stay safe guys.
Hey I'm the same way if I go in the harbor freight there's always something that catches my eye and I got to have it even if I don't need it I got to have it
😂😂😂 loved the ending. I hate oil too! Somehow (eye roll) my carb float stuck and my crank filled with gas. When I turned it over oil and gas went everywhere. Need to go get some cheap kitty litter.
Yea you gotta be careful of that. My shovel has a drain plug on the crank case.. but I have got myself in the habit of always turning off the petcock also.
Do an old man a favor, never change. You are perfect just as you are. I believe that is why we all love your videos. 😊Peace ✌️ By the way I love listening to Red Bone as well. 😅
I've already written about how easy it is to pour oil if you don't have a suitable watering can. Answer: several sheets of paper in the form of a funnel (A4).
First time seeing your videos. Don't stress about the grumpy boomers. No matter how you do a thing, there will always be someone in the comments telling you how you did it wrong. Neat way to get the seal out. Remember. If it looks stupid, but works, it ain't stupid.
Don't be surprised when those crowbars bend like rubber. They aren't heat treated or tempered or annealed or anything else, they're just cold rolled steel bent into shape.
Too bad that you didn't have your new, "cute" crowbars to pull your seal with. Then, you could have started with the baby bear bar and went up and up in size to show us all what leverage does :)
I have built hundred bikes building one now I make so many tools I have drawers full of them I'm too cheap to buy special crap I have a Welder and a hammer and duct tape lol drill it weld something onto it yell at it whatever works
I love watching you wrench!
👍🏻😀👍🏻
Это очередной мой комментарий в поддержку этого Ютуб канала. Всем спасибо! И поздравляю всех с началом зимы.
Yes, you're right. I just like watching you do stuff.... but also like what you do! I always learn from you...
Hello Angel, I am a German fan of your channel and actually not because of the Harleys, but to understand the language the way you, as a normal woman, speak it.❤❤
Thanks for watching!!
CHEERES to the hardest worker on the internet ! Hip hip hurray, hip hip hurray, hip hip hurray!❤
Keep the reality. We understand that. And your not the first person to forget the drain plug. Thanks for update. Cheers from down under 🇦🇺 Stan.
Thanks Stan, glad you enjoy the videos!
Good morning 🌅 Angel, we have all noticed that you’re living in the moment, 😂, And yes it is that time of year winter 🥶 is approaching or in some cases it as arrived, 😱❄️☃️, Great to see Dad giving you instructions on the turn around, John Crash in, that reminds me I didn’t put my bike on the lift 🛗, before I had my op on my hand 🤚, I can not ride it for the next 3-4 months, not good for the bike to be sitting in one place for so long, flat spot on the tyres 🛞, have great week, we all 👀 forward to see you wrenching on your next bike project, 💔🥶from France.
Looking forward to the ironhead project! Ironheads forever! God bless! Great seeing your dad.
Those bars are for removing trim from a house. They’re wide and flat to protect the trim and the drywall
It's 38 in Florida this morning. In satsuma, Florida.
Hope you have a wonderful day, richard
Nice seeing Bill too. Awesome video ❤❤❤❤❤
Red, Those cute little tools are woodworking tools, pulling nails, etc 😊..so we get to watch you do stuff and listen to you TALK ! …. ☺️
I had the same problem so I hung my tools on the wall . I hang as much as possible. It helps a lot.
If you get a small slide hammer, you can trap the head of the screw in its chuck and just bump the old seal out. Only have to drill one screw hole and it's done in just a couple minutes.
CHEERES to the hardest worker on the internet ! Hip hip hurray, hip hip hurray, hip hip hurray!❤. Keenan is a close second.
I've been told not to trust Temu tools but it would be hard to mess up a pry bar. Lots of uses with those! I do like the baby one. It will fit where many tools won't. We are pretty cold here too but my new furnace was installed yesterday so the shop is nice and warm. It is fun watching and listening to you mess around in your shop. You have a great sense of humor! Keep the videos coming!
Hi Red.. get a empty 90 wt.qt. jug and use that for filling transmission, primary and anything else you need to use a funnel for..just wash it out with a cup of gas or kerosene when changing different fluids....
youll never see her waiting in line for hours at a taylor swift concert
😂. Indeed. And that's a good thing.
You got that right!!! I don’t even listen to that for free!
😂😅@@RedRiderCanadaBC
trailer swift
As always ,enjoyed your videos .
Thanks Mark 😊
I live for your bloopers Angel 🤣🤣🤣❤
Keep The Shiny Side Up :)
New living concept; "Tiny Garage!" 🤣🤣
Red Bone has great garage tunes , I agree about winter it sucks !
The Dyna had a tough look to it !!! Great vid as usual...stay warm!!
Hi, I enjoy your videos, iam 75, but you get me excited more ways than one, I have a 69 FL project I should finish...
Is like a house, never endind job.
But in a Harley is fun to do it.
And, you are Awesome.❣❣❣ and Beautiful❤😊😅, plus we always learn some .
Thank you for your work.
Much respect.
"Overhead supply" could be? your friend, especially considering time and motion implementation. See what ya reckon?
Fluorescent tubes, (custom LED configurations these days), at right angles to the bench. 12v power feed of appropriate, (adjustable), amperage.
Fuel and oil. (1 litre fuel feed, custom brass tank, preferably vintage, 1 litre 50 weight feed -> hang the bottle for gravity drain).
Compressed air feed. 240v, (mains), feed.
Suspend complete handle bar and triple tree assemblies above the machine as far as wiring will allow, 1 inch is enough. STRONG ratchet straps to do so.
Drop fully assembled front forks WITH wheel, down and out to change steering head bearings... Etc etc etc. It's a lot of setting up but makes spannering a dream.
Good to know! Thanks 👍
Temu has some kool stuff...like my long sleep pants. I had a tank once with dents...filled in with JB Weld and got some bullethole decals and put them on and sealed them with gloss polyurethane spray. That bike even won contests for best paint.
Cool idea!
I agree.... no electric vehicles for me and the family. It is fun to pass the people in their electric vehicles in the T bucket and hit the throttle a little bit. The looks are amusing to say the least. Keeping the bikes and the T. It is fun working on them too.
T bucket 4 life
That’s awesome!! My dad built a hot rod t bucket back in the day, it was crazy lol.
It is fun to drive!
Thanks for sharing your "reality" as you called it. It's refreshing and often funny. You're such a piece of work 😊
Glad you enjoy it!
I love how you were being playful and cutting up today,gotta have fun,Mikey in Arizona
That's me every time I clean the garage lol.
Great out trow.
Hello Angel...as far as transmission lubricant goes, Red Line Heavy ShockProof Gear Oil has a thickness greater than 75W250 but has a unique low fluid friction like 75W90. It's very good quality. Hi to you and yours. ✌️
Good to know, Rick. Thanks! I've heard good things about Redline oils but never used them myself.
Hello Angel, using Red Line Heavy ShockProof Gear Oil is the best way to pamper your gears, shifter clutches, mainshaft & countershaft, bearings and bushings etc. Your Transmission will shift better, will run quieter, and cooler. And...last longer. Yes it's just that great. Hi to you and yours. ✌️
We like the VODOO you do Angel!👍
Hey Angel it was good to see dad in the video tonight. Can’t wait to see what you guys come up with for the Dina stabilizer. Take care and stay safe guys.
You too!
Hi RR thanks for sharing your routine keep warm cheers
Thanks, will do!
You're so genuine on camera. it's so engaging and refreshing. Merry Christmas! Blessings!
Thanks 😊 And Merry Christmas season!!
Your my favourite bluie on YT , I always listern to what u are saying, right or wrong miss rdng hood 😁🤗👍✌
Totally awesome
The proper gear oil in the trans is *Kendal 50-70 weight*..winter or summer,
Works good in the engine to,especially Shovelheads....
Love how you do things looking forward to the next one. Till next time, stay safe and healthy
Thanks, you too!
Your videos always great to see and here. Sort of comforting. Thanks.
😊😊
Nice video! Reminds me need to get my little garage cleaned up. Need to get back working on my Shovelhead.
It's always a good time to get back to the wrenching!
Hey I'm the same way if I go in the harbor freight there's always something that catches my eye and I got to have it even if I don't need it I got to have it
Yea I have to force myself to have tunnel vision in those stores
The baby bar is for keys 😇 and or slippers 😍
Hahah
Howdy. From evaline Washington keep up the fun postings
Thanks!!
Didn't know that dynas needed a stabilizer,,, thought they were like sportys. Cold in nyc!
There is a thing called “the dyna death wobble”
😂😂😂 loved the ending. I hate oil too! Somehow (eye roll) my carb float stuck and my crank filled with gas. When I turned it over oil and gas went everywhere. Need to go get some cheap kitty litter.
Yea you gotta be careful of that. My shovel has a drain plug on the crank case.. but I have got myself in the habit of always turning off the petcock also.
Shovelhead love!! ❤😁
Yes 🙌
Watching here sis nice content nice to share
May want to consider an oil extractor. Handy device to have. Great for bikes, boats, lawnmowers etc. Less mess.
I might have to look into that 🤔
The title says it all!!!
🥳
You entertain me for sure 🤓
🤓
Awe cute little prybar !😊
So cute! 🥲
For prying fingernails?
@@RedRiderCanadaBC Snap on got me with their small set of pliers. They are handy though. 😀
No more brownies in that pan 😂
Good bloopers
Lol 😆
AngeL...take a break young Lady🙂
Do an old man a favor, never change. You are perfect just as you are. I believe that is why we all love your videos. 😊Peace ✌️ By the way I love listening to Red Bone as well. 😅
Thanks 😊
l run 20w 50 in all 3 of my 94 Harley oil's.... l did use to ran Gender Natural Fluid in my primary but now 20w 50 in evrything now
cheers Red....
lol gender neutral fluid 😂 do you call it tranny fluid?
@@RedRiderCanadaBC caint call anything tranny anymore it upsets the bent community lol
@@RedRiderCanadaBC where not aloud to use the T word... the alphabet people get very ofended...lolll
Awesome video! Can I ask what lift that is, black one. Thanks!
It's from the Canadian version of what would be Harbour Freight
ITS YOU!!! ITS YOU!!!
😊
Hahahahaha I have an oil jug labeled "Chuck Oil" at my Dad's, where I change my oil in the cars.
Haha thats awesome 👍
Great! 🤘🤘🤘
Thanks!
I've already written about how easy it is to pour oil if you don't have a suitable watering can. Answer: several sheets of paper in the form of a funnel (A4).
I approve this message…
🆒 Video Red Angel Goddess !!!!!
Thanks Snake!!
@RedRiderCanadaBC Welcome Red Angel..I Ain't Nice...But U ROCK 🎸GIRL !!!!
Funny, I only have one shovelhead. And I STILL always have something I should be doing to it...
So true
Do you have to do anything with Lacey's Sportster this winter?
Nope!! She's good to go for the spring
A clean shop is a sign of someone who is idle
A clean shop is someone who is organized. Not good if you can’t find your tools.
I always cleanup between projects otherwise things just become a mess. And jobs take longer to finish when you’re working in a mess.
Hey Red 👍👍👍
Hi 👋
First time seeing your videos. Don't stress about the grumpy boomers. No matter how you do a thing, there will always be someone in the comments telling you how you did it wrong. Neat way to get the seal out. Remember. If it looks stupid, but works, it ain't stupid.
Thanks!! I hope you enjoy my channel 🙂
Is that shifter knob glass and how old is it just couris. The house I live in has them for door knobs its 1927 built house
The shifter knob is a door knob out of an old house. Not too sure how old it is though.
Not many folks have even heard of RedBone any more .
70 degrees F. today in Calif, so I went for a ride. What did you do, Angel?
Probably froze lol
@@RedRiderCanadaBC HAHAHAHAHA!!! You should become a snowbird, Angel. They always have more fun.
😊 Happy Days Sis 😊 COMMENT! Etc.etc!!!😊
Thanks!!
Don't be surprised when those crowbars bend like rubber. They aren't heat treated or tempered or annealed or anything else, they're just cold rolled steel bent into shape.
😧
10:53 SHAKE that thang girlfrien'
The title expresses the trouble. Rather ride than be constantly wrenching.
I just want to ride, RR
What Ruby Said😀😇😀
Jims makes a seal puller… it’s basically the same concept of 3 screws… but… it is WAY EXPENSIVE!!! If your way works… Fffffforget them!! 👍👍
Yep!!
I always clean my tools
Same
you may want to invest in a mini split, 🥶🥵😊
All my tools are cute.
😆
Like 5he face you made your cute 😊
Too bad that you didn't have your new, "cute" crowbars to pull your seal with. Then, you could have started with the baby bear bar and went up and up in size to show us all what leverage does :)
Hahaha all while eating porridge 😋
A Harley is are a good motorcycle, if you like working on a motorcycle
It's a cool motorcycle if you like riding cool motorcycles too
🤘🤘🤘
😎
🤟😘
p0ps R0CKS!!
🖖
😊✌️
@RedRiderCanadaBC
🤗
❤
👍🐾
I hear evolution sportster are very reliable far more then the bigger twins/ I feel people who can afford a 40000 harley don,t do their own work
Yea I don’t think the newer Harley’s are really designed to be worked on at home
😍
I have built hundred bikes building one now I make so many tools I have drawers full of them I'm too cheap to buy special crap I have a Welder and a hammer and duct tape lol drill it weld something onto it yell at it whatever works
That's the spirit! 😂
Someone forgot to put the drain plug in? Must have been dad, right?
🤐 😅
Only Canadians have tooks
lol yea I was sent this one from an American 🇺🇸
🙂❤️👍🥶
🤣😂
Get some earmuffs for them ears..
Electric vehicles are the devils work 😂😂
Your not a mechanic if you don't make a mess