QUANSHENG UV-K6 Is This The Best Modifiable Handheld Radio?

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 มิ.ย. 2024
  • In this video we take a look at the QUANSHENG UV-K6. Is This The Best Modifiable Handheld Radio? Is the RF Output clean? Let's find out!
    Promotional Purchase Link:
    www.banggood.com/custlink/DDm...
    www.banggood.com/custlink/KvG...
    AliExpress:
    s.click.aliexpress.com/e/_msF...
    Custom Firmware:
    whosmatt.github.io/uvmod
    I forgot to add the footage I recorded showing how to program the UV-K6 memories. Don't worry, it's easy. You can use CHIRP with the UV-K5 model selected.
    If you would like to show your support for this channel, then please consider becoming a member by clicking here:
    / @techmindsofficial
    Products used in my videos can be purchased through my Amazon storefront.
    US ► www.amazon.com/shop/techminds
    UK ► www.amazon.co.uk/shop/techminds
    Patreon ► / techminds
    Twitter ► / techmindsyt
    Facebook ► / techmindsyt
    Instagram ► / tech.minds.official
    Send $$ ► www.paypal.me/mobiledev
    Merch ► teespring.com/stores/techminds
    If you enjoyed this video please help me out by subscribing and help me get to my next Milestone of 100,000 Subscribers!
    #TechMinds #SDR #HamRadio
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 175

  • @hotquebec
    @hotquebec 6 หลายเดือนก่อน +8

    all YT vids should be as good as this.

  • @norrinradd8952
    @norrinradd8952 9 หลายเดือนก่อน +32

    Checking out reviews like these before I jump on the Quansheng bandwagon. Looks like a pretty decent radio. I don't need another HT but it's a lot easier to buy them in the 35 dollar range and then give it away later. Thanks for sharing.

    • @DeLorean58
      @DeLorean58 9 หลายเดือนก่อน +7

      I picked up the UVK5 back in April and I love it. I'm really impressed with the performance of it and sadly in some ways it out performs my icom id880h. I was able to easily work a 70cm repeater from well over 20 miles away in mountainous terrain, with nothing more than a basic no name, no gain antenna mounted on my fender.

  • @fullmetaljacket76
    @fullmetaljacket76 9 หลายเดือนก่อน +2

    I purchased the anysecu uvk5, very similar. I used the same uvmod program as well as chirp to make changes. My main interest was in activating am everywhere, in particular uhf. It does not show that am is on in uhf, however stations come thru. Tying the radio into a dummy load and tapping into another radio via an attenuator it sounds better. My real world results were like yours. Whether my test signal was fm/am the voice is legible in either mode, just favored slightly respectively.

  • @ravyyyyyyy
    @ravyyyyyyy 9 หลายเดือนก่อน +10

    Been using my K5 for 2 weeks now, got it to listen to satellites but quickly caught the bug and am now revising for my foundation license, Ive been hearing a lot of amateur activity on 2m in my area so I want to join in on the fun. Im pretty happy with airband, i live about 15 miles away from my local airport and from a big hill nearby with the airport just at the horizon Im getting very clear comms from airport side, and pilots can be heard even clearer. I've never had any prior experience with airband scanners but watching videos of some dedicated ones I can tell the k5 is nowhere near the quality of a dedicated one but I seem to have been lucky as mines perfectly readable, they dont seem to all be made the same. At the end of the day though it was 13 quid, its the price of a takeaway and I really feel like you cant go wrong with that.

  • @Kens1966
    @Kens1966 5 หลายเดือนก่อน +1

    PRETTY EASY FOR ME.i DID USE THE BROWSER CHROME BUT HAD TO WORK WITH IT A LITTLE THANK YOU FOR THE VIDEO

  • @daytona1212
    @daytona1212 9 หลายเดือนก่อน +5

    It is a great little radio. Plenty of MOD's. With a small change to the battery you can put the 3200Mah battery from the Quansheng UV-5R on this radio. Great stuff. The airband sound is bad. I have an UV-K5(8) but that's the same as the K6. The firmware install methode you showed is great, But if you short press * on the keyboard and send some DTMF codes, the screen wil get distorted. It will correct itself after that.

  • @TonyLing
    @TonyLing 9 หลายเดือนก่อน +20

    1:16 I've tested a couple of these 1600 mAh batteries for charge absorption and they do indeed exceed their rated figures.

    • @omicrondec
      @omicrondec 3 หลายเดือนก่อน

      👊🏼

  • @TheDoug625
    @TheDoug625 7 หลายเดือนก่อน +1

    Took me a few tries but it worked. Thanks!

  • @David-km8in
    @David-km8in 4 หลายเดือนก่อน

    Hi Matt, I brought two Quansheng radios. One for a amateur friend and one for me. I just wanted to try one out and experiment with different firmware options. But I was pleasantly surprised how good it was for so little money. And know using it everyday on a my local repeater net, while dog walking. Getting great audio reports and speaker loudness is good in noisy environments.
    All the best David M0DUU

  • @19ct040
    @19ct040 8 หลายเดือนก่อน +8

    Bought the UV-K5 a while ago. Im very pleased with all the functions especially the band unlock. Im using this as a handheld CB and the reception is outstanding with a simple telescopic 27mhz antenna. Tested this next to a Dynascan 10m66 (Anytone AT6666 clone) and this little Quangsheng picked up more signals every now and then!

    • @sparky71a
      @sparky71a 7 หลายเดือนก่อน

      When you say CB are you TX on the 11 meter band?

    • @crowradio5127
      @crowradio5127 7 หลายเดือนก่อน

      Yes

    • @sparky71a
      @sparky71a 7 หลายเดือนก่อน

      @@crowradio5127 Well if that's the case I'm getting one cheers 👍

    • @ChrisBrown-ge6bm
      @ChrisBrown-ge6bm 7 หลายเดือนก่อน +1

      Can you explain how to Tx on 11m
      I've done the mod but unable to tx on cb mode
      Is there a setting I need to change?
      Thanks
      163CT341

    • @eldontyrellcorp
      @eldontyrellcorp 6 หลายเดือนก่อน

      The custom firmware unlocks transmitting on several bands... CB.. air...

  • @thetravi1348
    @thetravi1348 6 หลายเดือนก่อน +4

    I love my UV-K5. Especially since they came out with the patch to program them with the tidradio Bluetooth programmer. I just got the UV-K6 yesterday and I love it as well. It does so much more then the UV-5R. Not knocking the UV-5R at all as I have 18 of them boxed up and ready to give away this Christmas. Personally I only have 1 true UV5R but like 6 that are basically the same thing. I’m a pretty new HAM at only 3 months in. I really like the TD-H8.

    • @RexorLeet
      @RexorLeet 5 หลายเดือนก่อน

      man i'd sure love 4 of them. my dad asked me to buy them so we can use in the ranch so i've been searching. do you recommend these?

    • @ramv1564
      @ramv1564 หลายเดือนก่อน

      What about the airband? Is it clear? Is there an update which will improve the airband?

    • @5675492
      @5675492 หลายเดือนก่อน

      @@ramv1564 In other videos the recommendations for better airband are :
      get a airband tuned antenna
      egzumer firmware mod
      I can't personally vouch for either ( haven't tried anything yet) but that's what I saw

  • @C4H6As
    @C4H6As 8 หลายเดือนก่อน

    What a nice surprise, a good oldschool black on white LCD which is also readable without backlight! AM sounds crappy like the K5.

  • @user-bm9se8xm7r
    @user-bm9se8xm7r 5 หลายเดือนก่อน

    Thanks for the review and the bad news. I purchased 3 of these radios, specifically to monitor the Air Band. 126.700Mhz. I live in a small country town in Australia and the AirCare chopper flies directly over my Quadcopter flying field. If I hear him coming in I have time to get my Quad on the ground.
    I leave one radio at home and my wife and I have one whilst flying. I also have 3 Baofeng UV5's but they don't have the Airband, but another new radio the Baofeng UV18 Pro which does have the airband I haven't figured out how to program it so I have no idea if it's AM reception is any better, probably the same.
    Actually I'm having problems entering the Airband Frequencies in the Baofeng. I've followed 3 separate videos, and all O get is the voice saying Squelch. I'll figure it out though 🙂

  • @digitalmediafan
    @digitalmediafan 8 หลายเดือนก่อน +6

    There is firmware for the K5 which gives SSB and extended frequency coverage down to 19 Mhz. Have you tried this assuming it works on the K6 ?

  • @knoxieman
    @knoxieman 7 หลายเดือนก่อน +2

    Super video, cheers Mat

  • @Ross13ful
    @Ross13ful 9 หลายเดือนก่อน +1

    Thanks For The Video Can You Possibly Review The Quansheng Uv-5r

  • @andrewmunz1639
    @andrewmunz1639 7 หลายเดือนก่อน

    i got one of the malahit-DSP SDR. it has "DSB" double side band, this seemed to improve airport approach

  • @JerryEricsson
    @JerryEricsson 7 หลายเดือนก่อน

    Saw a video on this set and, well, went to Ebay and found a US Seller because getting things from China is simply no longer worth the wait, last ali order took over a month to arrive. So mine is on the way I guess. I do love playing with my HAM sets, have had my ticket for 4 years now and am studying to get my HF ticket so I can play on the HF bands. Thanks for the video's I am studying to see the advantages of this over my old Baofeng sets or my ancietn Stnadard 2 meter hand held.

  • @lukasmaxa8700
    @lukasmaxa8700 8 หลายเดือนก่อน

    hello i would just like to say i teested the uvk6 aircraft recieving and it can do really well if ur near the atc towwer or airport radio and in the open (beter antena recomended)

  • @the80hdgaming
    @the80hdgaming 9 หลายเดือนก่อน +3

    Damn that radio is clean when it come to spurious emissions

    • @TechMindsOfficial
      @TechMindsOfficial  9 หลายเดือนก่อน +2

      Surprised me too! Its great to see this imo.

  • @gtretroworld
    @gtretroworld 9 หลายเดือนก่อน +3

    I have been using one of these for a few weeks,well the k5(8) anyway which is apparently the same radio.I managed a 25 mile QSO on video but a few days ago did just short of a 40 mile trip from up the tops.Definitely clean enough on the SA but i am sure these are missing a AM Detector as it is horrendous.
    Excellent video..Thanks

  • @user-em6vi6sj7p
    @user-em6vi6sj7p 9 หลายเดือนก่อน +9

    a Polish ham developed a mod changing the 100pf cap top right of the audio amp to 1nf
    much improved AM audio.

    • @daytona1212
      @daytona1212 9 หลายเดือนก่อน +4

      Do you have more info on that like a mod name so we can find it?

    • @damiengirvan5020
      @damiengirvan5020 9 หลายเดือนก่อน +3

      I want to know this also

    • @ct1emj
      @ct1emj 9 หลายเดือนก่อน +1

      Do you know were we can find schematics to do that mod ?

    • @user-em6vi6sj7p
      @user-em6vi6sj7p 9 หลายเดือนก่อน +2

      @@daytona1212 putting quanshang uv-k5 audio into YT produced: Quansheng UV K5 Audio Improvement Audio Fix: Gotowy

    • @daytona1212
      @daytona1212 9 หลายเดือนก่อน

      @@user-em6vi6sj7p Thank you.

  • @robertlanteigne6481
    @robertlanteigne6481 7 หลายเดือนก่อน

    great video. i am unsure however which program to use as you are showing here. please let me know what to do as i am not that heavy on these kinds of procedures. regards. rob

  • @David-km8in
    @David-km8in 4 หลายเดือนก่อน +4

    Hi Mat, try Exzummer 0.21 firmware .This will fix the bad audio on am. The radio doesn't have a am chip. So they use the FM and modulate it in FM in software. The problem they found was there was to much gain going into the radio and causing distortion. Egzummer reduces the gain into the radio.
    David M0DUU

    • @TechMindsOfficial
      @TechMindsOfficial  4 หลายเดือนก่อน

      Thanks David, yep I tried recently and it’s way better on AM. Cheers

  • @oasntet
    @oasntet 5 หลายเดือนก่อน +1

    Seeing all of the crazy hacks that have come out for this over the last couple months, I kinda think Quansheng should produce a model specifically aimed at the homebrew-minded hams. One that's easier to get into, has a bunch of extra ports for talking over something faster than the audio port serial, maybe even a pad to throw in your own LPFs...

  • @user-bc5qc9bn2w
    @user-bc5qc9bn2w 9 หลายเดือนก่อน +5

    Two things:
    1) What antenna were you using for AM aircraft? A “dual-band” or one cut and tuned for air bands?
    2) Text messaging - does it use APRS ,or a different protocol?

    • @edwardfletcher7790
      @edwardfletcher7790 9 หลายเดือนก่อน +3

      The air band problem is it uses Freq division to do it as the chip has no native compatibility.

  • @OnTheMicwithMike
    @OnTheMicwithMike 9 หลายเดือนก่อน +6

    Airband is hit & miss, but I've found when on the airband if you set it to Wide rather than Narrow on AM - to my ears anyway a slight improvement.

    • @SansNeural
      @SansNeural 9 หลายเดือนก่อน

      I don't have the radio, but from the sound of airband in this video I figured the AM bandwidth on airband was too narrow. Seems like your experience backs my assumption up some.

    • @hruskozrout
      @hruskozrout 8 หลายเดือนก่อน

      yes, with narrow setting, you cant even set SQL to 1, with Wide SQL can be 2-3

  • @kenroberts9943
    @kenroberts9943 9 หลายเดือนก่อน +6

    I modified my UV-K6 using the website in your video. Everything works fine. My biggest complaint is AM aircraft band reception, which is horrible. Probably not fixable with a firmware upgrade.

    • @TechMindsOfficial
      @TechMindsOfficial  9 หลายเดือนก่อน +5

      Such a shame isn’t it, if AM reception was good it would be a 10/10 radio imo.

    • @Marek_M79
      @Marek_M79 9 หลายเดือนก่อน +4

      the chip in this HAM radio doesn't support AM, so what do you expect? The chip is Beken BK4819

    • @patring620
      @patring620 9 หลายเดือนก่อน +6

      @@Marek_M79 OK. Thanks for setting us straight, Mr. Marconi.

    • @user-em6vi6sj7p
      @user-em6vi6sj7p 9 หลายเดือนก่อน +8

      a Polish ham developed a mod changing the 100pf cap top right of the audio amp to 1nf
      much improved AM audio.

    • @Marek_M79
      @Marek_M79 9 หลายเดือนก่อน

      @@user-em6vi6sj7p I did see his video, after changing it, still AM sounds terrible, the voice is very crackling. I wanted to share it over here, but TH-cam is automatically deleting the comments with the links. His TH-cam channel name is @gotowy_radio

  • @leejenkinson5521
    @leejenkinson5521 8 หลายเดือนก่อน +3

    got the UV5(K8) for £15.99 and have to say I am loving it, in fact, I think I may prefer it to my Baofeng UV17 Pro V2. There are more accessories and the screen is better in sunlight too!

  • @robbnj
    @robbnj 7 หลายเดือนก่อน +3

    I'm not a HAM enthusiast. I'm wondering if this can be used as a handheld scanner to search/listen/save frequencies of interest, Specifically, can I easily set Hi/Lo limits and have it scan between them? I bought the UV-5R, thinking it could do this, but it seems I cannot.

  • @t.c.2776
    @t.c.2776 7 หลายเดือนก่อน +1

    because of the reviews I've seen and it's versatility... I just purchased 2 UV-K6 off of AliExpress for $13.50 each and $14 shipping... don't need two but basically bought the second one for the battery... or an emergency situation... just hoping they aren't factory rejects or seconds...

    • @bob_mosavo
      @bob_mosavo 15 วันที่ผ่านมา

      How did they turn out? Were they factory rejects?

  • @johnnybwrlr983
    @johnnybwrlr983 6 หลายเดือนก่อน

    i just ordered the Quansheng UVK6 radio from Aliexpress. I am interested in receiving the hf ham bands, along with the spectrum analyzer, while also using uhf and vhf. I will likely set up the radio for hamoutube repeaters, gmrs repeaters and listening to hf while on the road. Several youtube videos led me to believe I can receive 40m and above, but what I saw in the firmware software was something like 18mhz and above. What is the real story. I of course would like 1.8mhz-30mhz, 50mz, 144-148mhz, 440-470mhz and airband. What are the actual limits?

  • @Scotscan
    @Scotscan 9 หลายเดือนก่อน +6

    Hmm, even if that says AM mode that sounds suspiciously like AM being received with an FM filter!

    • @VicGreenBitcoin
      @VicGreenBitcoin 7 หลายเดือนก่อน +1

      Yes, my friend Yes, you have it right!

  • @Ass_Burgers_Syndrome
    @Ass_Burgers_Syndrome 6 หลายเดือนก่อน

    Matt I have a question about the antenna connector. I noticed it has inner and outer threads. The antenna that comes with it has female SMA connector and uses the inner threads .
    Is there a purpose to the outer threads and can they be used, and what type is it?
    I want to buy a longer telescopic antenna for 27mhz but I am limited in choice because all the antennas I see have male connector and I will need a female to female adapter .
    Can the outer threads be used by any kinds of aftermarket antennas? Thanks!

  • @hongvietle3875
    @hongvietle3875 6 หลายเดือนก่อน +1

    Thank you for the video, what cable do you use for customization?

    • @chrisreynolds6331
      @chrisreynolds6331 5 หลายเดือนก่อน +1

      The standard Beofeng cable works on mine.

  • @christophercullin9309
    @christophercullin9309 7 หลายเดือนก่อน

    it would be great to see this radio receive full shortwave on AM mode

  • @RosssRoyce
    @RosssRoyce 6 หลายเดือนก่อน

    My airband sounds very clear, even with weak signals. My flying aviation radios sound more “overdrive” sounding. This one is thin but Crystalline clear.

  • @m3hnl
    @m3hnl 8 หลายเดือนก่อน

    i brought 1 and yes the am airband is awful but you can recieve it on that radio. ive had a baofeng uv5s for years no airband but a realy good radio 73 mat

  • @tvbox6955
    @tvbox6955 9 หลายเดือนก่อน

    Thanks for the modification information. I wonder if there is a similar modified firmware for the Radtel RT890?

  • @skysurferboy
    @skysurferboy 9 หลายเดือนก่อน +2

    Does this radio do the 8.33khz spacing on airband?

  • @DCDura
    @DCDura 6 หลายเดือนก่อน +1

    Do you have the information on the Tiny SA you used in the video? You mentioned you'd list it- how to use it.

    • @TechMindsOfficial
      @TechMindsOfficial  6 หลายเดือนก่อน +1

      Sure, I dont a video a while ago on this: th-cam.com/video/miHa-gul4nE/w-d-xo.html

  • @zingodingo2816
    @zingodingo2816 2 หลายเดือนก่อน

    No doubt airband reception depends a lot on the antenna (aerial).

  • @andybibby342
    @andybibby342 7 หลายเดือนก่อน

    That airband sound to me like the radio is receiving in narrow band, and the the tx is am wide band.

  • @Antenna101
    @Antenna101 9 หลายเดือนก่อน

    I heard that rtl sdr v4 is getting released!

  • @tonyoutdoors9369
    @tonyoutdoors9369 5 หลายเดือนก่อน

    egzumer 021 is excellent on the airband

  • @lawrencewhiteside7857
    @lawrencewhiteside7857 หลายเดือนก่อน

    can you use the programing cable for the UV-K5 with the UV-K6?

  • @TonyLing
    @TonyLing 9 หลายเดือนก่อน +1

    I have a UV-5 and a UV-5(8) and they both have poor audio on AM airband.

  • @cherrysdiy5005
    @cherrysdiy5005 5 หลายเดือนก่อน +1

    I own a UV-K5, standard model. I recently modded it with Egzumer's mod, 0.20
    The airband receive is so much better. Only downside is that the NOAA function was removed to make room for various features.
    Thankfully, Egzumer gives great instructions on how to customize the mod. So, I now have improved AM receive on Airband, and NOAA functions.
    For the price, this radio is worth the time it will take for you to get it suited to your needs.

    • @The0nionKnight
      @The0nionKnight 5 หลายเดือนก่อน

      What did you have to give up in order to have those functions? I kinda miss having NOAA =(

    • @cherrysdiy5005
      @cherrysdiy5005 5 หลายเดือนก่อน

      @@The0nionKnight I decided to get disable the Spectrum analyzer. Such a function is not a priority to me, but I also do not use it.
      I also disabled Fast Scanning, since the squelch gets weird, according to the author of the mod in the comments of the makefile.
      And just for fun, I enabled Alarm, disable Small Bold for the frequency mode/NOAA, and disabled Big Frequency. And of course I enabled NOAA.
      Upon recompiling and saving the firmware I flashed it using Egzumer's tool and it was successful.

  • @walter9724
    @walter9724 3 หลายเดือนก่อน

    I want to use mine on the cb band but I don't know how to turn on duplex mode to access channel 1&2 repeaters. Any advice?

  • @L.o.u.i.s..
    @L.o.u.i.s.. 7 หลายเดือนก่อน

    Which software has the most detailed and biggest "S" meter?

  • @oscarornago7419
    @oscarornago7419 7 หลายเดือนก่อน

    What is the software for SDR used for testing it?

  • @lukasmaxa8700
    @lukasmaxa8700 9 หลายเดือนก่อน +1

    one thing abt listening to the aircraft radio is that in cities or closed spaces its usualy distorted but it works beter on a hill or open areas near airfeild (note: i heavent tried this personaly its just what i heard from others)

  • @bumblebee-mygt867
    @bumblebee-mygt867 7 หลายเดือนก่อน

    Where can the programming lead be purchased from

  • @user-em6vi6sj7p
    @user-em6vi6sj7p 9 หลายเดือนก่อน +2

    Ive a K5 (8) and a K6 and apart from the badge i cant find any difference
    The UV5Rplus version has the biggest battery, trim off a piece of plastic on the top
    of the UV5Plus battery and it'll fit any of the K5/6.

    • @zer7637
      @zer7637 5 หลายเดือนก่อน

      Uvr5 plus is better than 6 ?

  • @anthonypope8429
    @anthonypope8429 4 หลายเดือนก่อน

    Hi I have the quansheng UV-K6 and I have the same problem with the airband

    • @johnwilmot5764
      @johnwilmot5764 2 หลายเดือนก่อน

      You need Egzumer that has the Am fix standard radio I can almost hear Volmet 128.600 , my Egzumer v0. 22 firmware radio I can hear it

  • @devondetroit2529
    @devondetroit2529 9 หลายเดือนก่อน +1

    It can send text messages? Cool radio

    • @TechMindsOfficial
      @TechMindsOfficial  9 หลายเดือนก่อน +1

      Apparently with the custom firmware. :-)

  • @RADIOBUNKER73
    @RADIOBUNKER73 9 หลายเดือนก่อน +1

    Nice video Matt, looks like we are connected I just upload a similar video too! all the best

  • @racingidh6340
    @racingidh6340 9 หลายเดือนก่อน +1

    I want to buy one of these three walkys. Which is better? quasheng uv 5r plus quasheng uv-k5 quasheng uv-k6 Thanks and regards.

    • @michelechiavon546
      @michelechiavon546 9 หลายเดือนก่อน

      I prefer the K5 just for the looks of it and for the bigger battery. Plus it doesn't have that horrible orange backlight

  • @Pedro8k
    @Pedro8k 7 หลายเดือนก่อน

    I dont think this radio has real am detection but for the price it is and what it can do and what you get it is ok

  • @SuperDelphinidae
    @SuperDelphinidae 9 หลายเดือนก่อน

    Is there anywhere where I can download a full uk set up ChirpNext file to use this properly (uk new to this)

  • @CommanderKeen4
    @CommanderKeen4 6 หลายเดือนก่อน

    Rx sqelched live time (stby) for this radio? USB from 0-100% charging time? Original charger 0-100% charging time? I am looking for radios for our regional pepping team. THX

  • @zer7637
    @zer7637 5 หลายเดือนก่อน

    Better than uv5rplus ? Thanks

  • @tweedandbriar
    @tweedandbriar 2 หลายเดือนก่อน

    Will this actually work as a standard CB Radio?

  • @bryanmoffat5198
    @bryanmoffat5198 9 หลายเดือนก่อน +1

    I bought one just so I could listen to air band it’s useless should have watched some reviews first. I just received the JIANPAI 8800UV fantastic radio AM is crystal clear.

  • @ramsin.
    @ramsin. 9 หลายเดือนก่อน +1

    RE: AM receive, could it be because you had it set to narrow?

    • @edwardfletcher7790
      @edwardfletcher7790 9 หลายเดือนก่อน

      It's a HW limitations with the chipset.

  • @esuccessoveramente
    @esuccessoveramente 5 หลายเดือนก่อน

    best video

  • @gerddijkstra7339
    @gerddijkstra7339 9 หลายเดือนก่อน

    nice are the scan list , and you can TX-off using the shift function , so you cant TX on not ham freq , good handheld for the money

  • @oscarornago7419
    @oscarornago7419 7 หลายเดือนก่อน

    what's the difference with K5(8)?

  • @harritkoster8654
    @harritkoster8654 9 หลายเดือนก่อน

    it is a beautiful radio but it has a problem in the Netherlands hot air balloons use 8.33 KhZ and now there is a problem example 122.255 / 122.250 - 8.33 is a problem. when the frequency is entered on grid 8.33 it indicates a problem that already indicates that the correct bandwidth is not correct that means that this walkie-talkie is not the right one which will work well and the modulation will not work correctly because it is next to modulate the frequency and the speech will not be good, but other than that it is a nice cheap walkie-talkie.

    • @SuperAbel17
      @SuperAbel17 9 หลายเดือนก่อน

      Puedes modificar los saltos de frecuencia, con el mod en la página web que indican en muchos canales. No hay problema para éso 😉👌

  • @onceways
    @onceways 3 หลายเดือนก่อน

    Can this RX/TX CB frequencies?

  • @RichMantaray
    @RichMantaray 9 หลายเดือนก่อน

    well i got the k5 ,,, wasnt good ,,, then i got the k58 ,,, was a little better ,,,,,,, so i got the k5 uv5r plus was way better ,,,but not usb charge ,,,but the double size batt makes up 4 it i guess , it is a clear ,,,il be takign it to manchester air port soon to test it

  • @m3cvfm
    @m3cvfm 9 หลายเดือนก่อน +1

    If you put the rig to scan your memory you will see the back light will remain on while scanning.

  • @panplayer
    @panplayer 6 หลายเดือนก่อน

    Would a programming cable from my UV5R work with this?

  • @daytonagreg8765
    @daytonagreg8765 5 หลายเดือนก่อน

    The buzz is about the “K58”.
    Is that special in some way that the K6 is not?

  • @rosie9490
    @rosie9490 9 หลายเดือนก่อน +1

    I have the k6. The airband RX isn't as bad as how yours sounded in the video. It's not really good but I find it still useable. The airband on the Talkpod A36 plus is much better.
    I found that after doing mods the TX output on 446 Mhz was around 2.4 watts maximum, whereas prior to the mods the power output was around 4.6 watts. Has anyone else experienced this?

    • @crack_squirrels
      @crack_squirrels 9 หลายเดือนก่อน

      Would you recommend the Talkpod A36 Plus for a decent entry-level HT for the price?

    • @olegsergeyevitch
      @olegsergeyevitch 9 หลายเดือนก่อน

      Use 27 firmware

    • @rosie9490
      @rosie9490 8 หลายเดือนก่อน

      @@crack_squirrels Because of the reports of bad harmonics, I wouldn't recommend the Talkpod as a first HT. If listening to airband isn't important to you, I would suggest one of the Baofeng UV5R versions. I have about 22 HT radios so if one is spurious, I still have lots of other radios to use.

    • @rosie9490
      @rosie9490 8 หลายเดือนก่อน

      @@olegsergeyevitch Thank you. I tried it but still same problem. I'll try again in case there has been an update.

  • @tarp-grommet
    @tarp-grommet 6 หลายเดือนก่อน

    I tried to connect the K6 to Chirp and received the following error message "Memory download incomplete". I am using the new Chirp-next release and a Baofeng programming cable. I cannot find any other references to that message. Any advice would be greatly appreciated.

    • @ohenekojo2561
      @ohenekojo2561 4 หลายเดือนก่อน

      Try holding the baofeng cable terminal down into the radio firmly while it’s downloading.

  • @christophersmith1155
    @christophersmith1155 9 หลายเดือนก่อน

    i wanted to let you know that KNIGHTS CB is closing their store. Sad times ahead.

    • @circattle
      @circattle 8 หลายเดือนก่อน

      They are reducing the opening times of the shop. The store is carrying on online as usual.

  • @stratocasterblue
    @stratocasterblue 2 หลายเดือนก่อน

    wow holy moly 10th vid on this radio does the uv-k6(8) recieve ssb on 40 30 and 10 meters who cares about airbands this is an amsteur radio thanks

  • @ryanten6475
    @ryanten6475 หลายเดือนก่อน

    ❤❤❤❤❤

  • @mba2ceo
    @mba2ceo 9 หลายเดือนก่อน

    So NO FRS or MURS ?

  • @kb3svj
    @kb3svj 9 หลายเดือนก่อน

    Does anybody know why reverse SMA antennas are used on these Chi-Comm HTs?

    • @earlyadapter643
      @earlyadapter643 9 หลายเดือนก่อน +1

      It is not RP-SMA but the male is on the HT whereas the female is on the antenna. The good reason for this is that mounting the antenna is done exactly the way you are not supposed to tighten a SMA connection: you are supposed to rotate the nut only and hold the part with the pin, which is not possible since the antenna is one piece. The good news is that this "abusive" mounting prematurely wears the female connector. Since it is in the antenna, the cure is to get a new antenna for 5 bucks, rather than spending half a day changing the connector of the HT.

    • @kb3svj
      @kb3svj 9 หลายเดือนก่อน

      The pin is in the chassis jack of the radio; freeze vid at 3:30 mark. It is a RP-SMA.

  • @hikingfish3
    @hikingfish3 6 หลายเดือนก่อน +1

    There is an airband fix in the latest firmware from Quansheng if I got that correctly.

    • @johnwilmot5764
      @johnwilmot5764 2 หลายเดือนก่อน

      Egzumer v0.22 has the Am fix

  • @michaelw8509
    @michaelw8509 หลายเดือนก่อน

    hello i have this model and previous model and this model i have updated version egzumer v0.22...and both radio's exhibit very poor receive signals. i have a local 2mtr rptr close and even with outside antenna i am not able to hear it. transmits just fine, both models. there is no tone for receive but for transmit only. almost seems like there is no antenna connection or function enabled that adds attenuation. not sure.....but recv for me is horrible. maybe have bad radio's? anyone?

  • @TomaszBorowskiTOM124q
    @TomaszBorowskiTOM124q 9 หลายเดือนก่อน +1

    Fujian Nanan Quansheng Electronics Co., Ltd. FCC Wireless Applications shows nothing about K6 model, maybe too early,,,.

  • @Hank_W6IR
    @Hank_W6IR 9 หลายเดือนก่อน

    Seems like every day China is cranking out a new model HT. Kind of hard to keep up!

    • @TechMindsOfficial
      @TechMindsOfficial  9 หลายเดือนก่อน

      Tel me about it..! My storage cupboard it literally bursting with radios right now..! ;-)

  • @DJTonyBee
    @DJTonyBee 6 หลายเดือนก่อน

    I must agree, the AM mode on both the UV5 and UV6 stinks! It's like really distorted :(

    • @DJTonyBee
      @DJTonyBee 6 หลายเดือนก่อน

      Never Mind Turn Off and Hold the PPT and turn on lol

  • @rohnkd4hct260
    @rohnkd4hct260 9 หลายเดือนก่อน

    The Air Band sounds a few hz off frequency.

    • @TechMindsOfficial
      @TechMindsOfficial  9 หลายเดือนก่อน

      That's what I though, but I tried all of the steps, trying to dial it in, nothing made it sound better.

  • @kenharvey9714
    @kenharvey9714 9 หลายเดือนก่อน

    It's well reported that air band on this transceiver sounds really bad. I have this radio and air band does not interest me, so it's not a negative. The good news is that you can pick one up from Ali for only £13 All in.

  • @timothybrown7792
    @timothybrown7792 5 หลายเดือนก่อน

    According to Quansheng its the same radio as the K5/8

  • @hoggif
    @hoggif 9 หลายเดือนก่อน

    That one seems no good for aircraft band. Lots of chinese radios seem to have that feature, one day we'll get probably one with no spurious transmissions and good AM receiver. One day.

  • @user-my8zo8uh3n
    @user-my8zo8uh3n 6 หลายเดือนก่อน

    NEXT TO MY ICOM A16 AM TRANCIEVER ITS A KIDS TOY FOR SURE

  • @user-my8zo8uh3n
    @user-my8zo8uh3n 6 หลายเดือนก่อน

    SAME HERE BUT AM IS SHIT TRIED EVERYTHING STEPPING WIDE NARROW AM IS SHIT OTHERWISE ITS GOOD VALUE

  • @mim8173
    @mim8173 4 หลายเดือนก่อน

    I think that the am aviation band sounds crappy because the right antenna is not used.

  • @BusDriverRFI
    @BusDriverRFI 9 หลายเดือนก่อน +2

    Doesn't sound like an AM detector.

    • @programings
      @programings 9 หลายเดือนก่อน

      It is not, they use ugly DSP hacks to achieve AM.

  • @Tassie-Devil
    @Tassie-Devil 6 หลายเดือนก่อน

    Feeling like I just escaped being ripped off.
    I was JUST about to order a UV-6 online, because among other things I saw someone using the spectrum analyser.
    Now I discover that I can't access this function from any of the regular firmware (so far at least).
    QUESTION: Why should I trust whoever hacked and re-wrote the firmware to produce this "custom" stuff?
    Even the link you give has a warning in red: "Warning: There are unauthorized clones of UVMOD, designed with no regards for safety. Check the original repository for approved links..."
    Pirated software always brings huge risks???

  • @crhonda500
    @crhonda500 6 หลายเดือนก่อน

    yes AM is really bad

    • @user-mz7mf5dr1i
      @user-mz7mf5dr1i 4 หลายเดือนก่อน

      use new sofware they fixxed

  • @choppergirl
    @choppergirl 7 หลายเดือนก่อน

    What is the best HAM frequency to blast mp3's on?
    I want to set up my own mobile pirate radio station.
    They can triangulate on deeznuts as I'm traveling down the interstate, when I'm not trolling HAMs in the YT comments.

  • @michaelmaloy7849
    @michaelmaloy7849 6 หลายเดือนก่อน

    Be careful I bricked mine. Nice radio before it went night night. No fix. Filed under garbage.

  • @edwardfletcher7790
    @edwardfletcher7790 9 หลายเดือนก่อน +1

    Yeah it is the best, it absolutely kills the Baofeng UV-5R👍 I paid only US$15 for mine ! 😲
    Airband in Australia sounds much cleaner than that on 118mhz.

    • @user-dl6pn9kp8m
      @user-dl6pn9kp8m 9 หลายเดือนก่อน

      I found the UV 5R was more sensitive on 2 metres .

  • @coriscotupi
    @coriscotupi 9 หลายเดือนก่อน +5

    As a user of proper air band portable transceivers for many years, I find the Quasheng air band audio quality utter cr@p, outright unusable, nothing more than a marketing gimmick. It seems that instead of a proper AM demodulator, they implemented that few KHz detuning trick, and call it "AM".
    Even broadcast FM "pocket" receivers that I used to convert to air band in the early 80s had much better audio when receiving aircraft than this.