I have never had a problem with taping the canopies what has caused me to crash with the 120s2 is if the wind picks up or my orientation is lost, Or I take my eyes off the helicopter. I just crashed my 330s because my tail belt got really loose and the tail lost it's effectiveness and the servo's were acting funny.
@@calebsrccrawlers I learned that when I lost my old 180 trying to take off from the roof of my house lol . It was under power for the weight now once it got 3" up it nosed dive straight off the roof and into the ground full speed.
@@Portuguese-linguica how heavy was the tape? Ha ha ha, It must have weighed quite a bit to make that happen or there were several layers of tape causing there to be a lot more weight on the heli, I haves taped my old 120sr as well. I flew my 330s on a 3200 mah 4 cell lipo, it’s esc is rated for 3- 4 cell Lipo’s I strapped it to the to the bottom of the heli it was balanced with it on there and flew really great with it, I logged like 6 flights with the 4 cell. Before the crash, I don’t recommend using a 4 cell of that size for 3D flight or regular flight unless you no exactly what your doing. Was your old heli a brushless or brushed?
@@calebsrccrawlers it was two 2" peaces of masking tape cause the noise was smashed . ( I stepped on body ) other than that it had never crashed before with a 2 cell 500 mah battery .
the reason its on back order is beacuse evebody is ordering i have had to replace mines 3 times and also the swashplate still can get it to fly right, flys like a drunk pelican its not a great helicopter please buyer beware
You know you're late to the party, on the back order issue right? that's pretty obvious why things are back ordered!, And also that's always the risk we take as consumers, is, buyer beware with, everything. Mine did work amazingly, but now I just need parts for it. sorry if my response sounds like I am a jerk, that's not the intent.
@@calebsrccrawlers no man you are right it just has taken time to figure out if you have experience in this hobby is there any other brands of heli you recommend i know you have to replace parts but not after a few flights i do love to fly them
Nice Caleb 🚁
Thanks
Nice flying 👌
One thing I found out about putting tape on these is it will off balance the helicopter and cause it to crash .
I have never had a problem with taping the canopies what has caused me to crash with the 120s2 is if the wind picks up or my orientation is lost, Or I take my eyes off the helicopter. I just crashed my 330s because my tail belt got really loose and the tail lost it's effectiveness and the servo's were acting funny.
@@calebsrccrawlers I learned that when I lost my old 180 trying to take off from the roof of my house lol . It was under power for the weight now once it got 3" up it nosed dive straight off the roof and into the ground full speed.
@@Portuguese-linguica how heavy was the tape? Ha ha ha, It must have weighed quite a bit to make that happen or there were several layers of tape causing there to be a lot more weight on the heli, I haves taped my old 120sr as well. I flew my 330s on a 3200 mah 4 cell lipo, it’s esc is rated for 3- 4 cell Lipo’s I strapped it to the to the bottom of the heli it was balanced with it on there and flew really great with it, I logged like 6 flights with the 4 cell. Before the crash, I don’t recommend using a 4 cell of that size for 3D flight or regular flight unless you no exactly what your doing. Was your old heli a brushless or brushed?
@@calebsrccrawlers it was two 2" peaces of masking tape cause the noise was smashed . ( I stepped on body ) other than that it had never crashed before with a 2 cell 500 mah battery .
@@Portuguese-linguica huh, that is odd.
Purchased one recently very weak tail rotor design broke very easily with light impact
perfetc
What’s the fly time on this ?
when i flown mine it just started spin round and round?can you help plz ths mark.
This may seem like a silly question but is the tail rotor working? (Rotating).
@@calebsrccrawlers hi yes it works fine thx mark.
@@calebsrccrawlers hi again when i put right rudder in the tail motor spins faster and when i put left rudder in the tail motor stops spinning?
@@thedonnyman1 return it if you can
The tails break on these too easily
the reason its on back order is beacuse evebody is ordering i have had to replace mines 3 times and also the swashplate still can get it to fly right, flys like a drunk pelican its not a great helicopter please buyer beware
You know you're late to the party, on the back order issue right? that's pretty obvious why things are back ordered!, And also that's always the risk we take as consumers, is, buyer beware with, everything. Mine did work amazingly, but now I just need parts for it. sorry if my response sounds like I am a jerk, that's not the intent.
@@calebsrccrawlers no man you are right it just has taken time to figure out if you have experience in this hobby is there any other brands of heli you recommend i know you have to replace parts but not after a few flights i do love to fly them