The craftsmanship is undeniably fantastic. Very nicely and skillfully done. That being said, I can't help but point to the many different seams and connection points, every one of which being a weak point for a tool that is meant to stand up against a lot of pressure and stress. I just can't help but feel like each one of those connection points creates a weak point, and the fact that it's mostly held together with glue, just seems like it might last 1 or 2 seasons, if you're lucky. Not sure what kind of glue you're using, but this just doesnt strike me as something thats going to hold up to the regular stress, season after season. I feel like that glue is going to let go and fail under such pressure...eventually. If we add extreme temperature fluctuations, as are common for hunters to experience, I'm not sure I'd trust it as my go-to. Glue and cold don't mix very well. 🤷🏻♂️
thanks for the oppinion. I used super glue with nylon string to bond the joint. I think it also depend on the quality on the string. the one I am using hasn't dispppiont me.
Super c'est le plus abouti et le plus soigné du genre pourtant je ne comprends pas pourquoi tu n'as pas choisi de doubler l'épaisseur sur toute la longueur de l'arc?🤔 joli travail je vais m'en inspirer pour le mien merci 👍🇲🇫❤️
Este arco estilo asirio, te quedó realmente bello. Y ¿sabes? Me recuerda al arco clásico egipcio antiguo, porque no es curvilíneo. Quisiera reproducir tu trabajo, tomando prestados algunos elementos y procedimientos, para crear mi arco. ¡Felicidades! P. D. : Quisiera saber cuál es el libraje de tensión.
Hi again just saw the video great work as usual I do have some questions 1 why the pvc outside of the fibre glass I don't think it adds much to the power of the bow but it will certainly make the limbs heavier so reduce efficiency 2 I'm really surprised it's only 40 pounds with 6mm fibre glass. My favorite bow is about 52 lbs at 31 inches (just measured it) and I made it with 4.5 mm efg. I made the tips with recurve for 27cm. It shoots quite snappy. 3 what is the total length of the bow
Thanks bro for the question. The PVC is only for making the limb less skinny. I just don't like skinny limb. the draw weight is lighter than intended because I tried to achieve the V shape of the Assyrian bow, so unlike the composite or horn bows, the limbs don't bend very much when I put the string on and thus store little energy, and also because the over all lenght of the bow is longer than the average horse bow. I used to think about making it shorter.
@@backyard.craftsman ok thx for responding, I'm an engineer so I care more about the performance of the bow than how it looks. Maybe try the green efg here in Indonesia they have a couple of different grades. The clear one that is stronger but much more difficult to split evenly if you want to bend the tips and the slightly opaque once that is easier to split. I make my bows lean and mean. Cut out everything that doesn't help performance. I tried making a takedown horse bow but first version was a complete flop 😁 I think maybe I'll try your method of making a metal insert and put the limb straight into that.
That's a very interesting way to add PVC to the bow. It makes it look like it's covered in sinew and has a horn belly.
Beautiful work!
thanks I glad you like it.
Thank you so much brother 😊 आपने बहुत अच्छी तरह से धनुष बना कर दिखाया है
thanks
Beautiful man !
Thank you! Cheers!
Awesome thanks going to make one
I’m glad the video is useful for you
It's beautiful and works well
Thanks brother. I’m glad you enjoy it 😊
I think your method is very good.. like it.
Thanks 😊
You are very talented buddy!!!!.... beautiful
Thanks 😊
The craftsmanship is undeniably fantastic. Very nicely and skillfully done. That being said, I can't help but point to the many different seams and connection points, every one of which being a weak point for a tool that is meant to stand up against a lot of pressure and stress. I just can't help but feel like each one of those connection points creates a weak point, and the fact that it's mostly held together with glue, just seems like it might last 1 or 2 seasons, if you're lucky. Not sure what kind of glue you're using, but this just doesnt strike me as something thats going to hold up to the regular stress, season after season. I feel like that glue is going to let go and fail under such pressure...eventually. If we add extreme temperature fluctuations, as are common for hunters to experience, I'm not sure I'd trust it as my go-to. Glue and cold don't mix very well. 🤷🏻♂️
thanks for the oppinion. I used super glue with nylon string to bond the joint. I think it also depend on the quality on the string. the one I am using hasn't dispppiont me.
Commercial bows are glued together. Airliners are glued together
çok güzel yaptın usta eline sağlık teşekürler
İzlediğiniz için teşekkürler. zevk aldığına sevindim.
Amazing skill!
Thanks
Very nice build.
Beautiful functional art..subscribed 👍
Thank you so much 👍
cool bong
Zo'r chiqibdi, qoyil👍🏻.
Biz musulmonlar uchun kamon otish sunnat. Rahmat men ham kamon yasamoqchi edim, bu videoingiz katta yordam bo'ldi🤝🏻.
thanks for sharing ...
Thanks for watching!
❤
nice bow
Super c'est le plus abouti et le plus soigné du genre pourtant je ne comprends pas pourquoi tu n'as pas choisi de doubler l'épaisseur sur toute la longueur de l'arc?🤔 joli travail je vais m'en inspirer pour le mien merci 👍🇲🇫❤️
thanks brother for the comment.
👍👍👍👍😃😃😍
Super cool and inspirational! Where in the world are you shooting?
Bel lavoro, bravo.
Thanks, I am glad you like it.
🇧🇷👊🏹🎯🏹👊👍👍 show my friends 👏👏
Este arco estilo asirio, te quedó realmente bello. Y ¿sabes? Me recuerda al arco clásico egipcio antiguo, porque no es curvilíneo. Quisiera reproducir tu trabajo, tomando prestados algunos elementos y procedimientos, para crear mi arco.
¡Felicidades!
P. D. : Quisiera saber cuál es el libraje de tensión.
Thanks brother I am glad the video is useful to you.
knk bide bi osmanlı yayı yapmayı denesene
Awesome master
Hi again just saw the video great work as usual I do have some questions
1 why the pvc outside of the fibre glass I don't think it adds much to the power of the bow but it will certainly make the limbs heavier so reduce efficiency
2 I'm really surprised it's only 40 pounds with 6mm fibre glass. My favorite bow is about 52 lbs at 31 inches (just measured it) and I made it with 4.5 mm efg. I made the tips with recurve for 27cm. It shoots quite snappy.
3 what is the total length of the bow
Thanks bro for the question. The PVC is only for making the limb less skinny. I just don't like skinny limb. the draw weight is lighter than intended because I tried to achieve the V shape of the Assyrian bow, so unlike the composite or horn bows, the limbs don't bend very much when I put the string on and thus store little energy, and also because the over all lenght of the bow is longer than the average horse bow. I used to think about making it shorter.
@@backyard.craftsman ok thx for responding, I'm an engineer so I care more about the performance of the bow than how it looks. Maybe try the green efg here in Indonesia they have a couple of different grades. The clear one that is stronger but much more difficult to split evenly if you want to bend the tips and the slightly opaque once that is easier to split. I make my bows lean and mean. Cut out everything that doesn't help performance.
I tried making a takedown horse bow but first version was a complete flop 😁 I think maybe I'll try your method of making a metal insert and put the limb straight into that.
What kind of glue did you use
It’s superglue and epoxy
What glue did you use ????
What size of pvc pipe and schedule? Very nice bow!
Hello!
This is Epoxy AB glue?
Yes, it is
Do you have any written instructions anywhere?
what string u use for tying the limb?
It’s a type of nylon string
how long do i wait for the siyah to be glued?@@backyard.craftsman
@@rall.m with Superglue. 20 to 30 minutes is enough.
Specific details subtitled would've been nice
What is this type of wood?
@@abrahamdc7053 it’s a type of tropical hardwood. Unfortunately I don’t know it’s English name.
@@backyard.craftsman oh ok, thanks
whats lenght of bow string
it's 52inches
What kind of string is that
Das mit dem PVC Rohr gibt Rätsel auf.
Has puesto las siyahs al reves...
Negative, they are definitely oriented in the correct position.
How should i order to you
Ap terkaman sale karte ho kya hum chahiye
sorry brother, I made it only as a hobby not intended for sale.
Không mạnh gì cả chỉ làm cho vui
😂😂😂😂😅😅😅😢😢🎉🎉🎉🎉❤❤❤😂😂❤❤❤😂😢😮😊😂❤❤❤😊😊😊😊😊😊😊😊😊❤❤
فایبرگلاس و نمیتونم تهیه کنم 😑
Template please share
I am sorry brother, it's not available.
Speed ?
Without fps, it's meaningless.
Chronometer is expensive
@@theokrisna
You don't have to get one.
Please watch the video: “Measuring Projectile Speeds - without a Chrony” on TH-cam.
@@matthewyu3531 thanks for the suggestion 👍
All you need is a stop watch and some math
To soft
what glue do you use?