Nice! This is awesome! I had a couple motherboards that wouldn’t show the usb controller in hackintool so I ended up using Usbtoolbox or corpbewt’s usbmap.
I tried those my usb ports on my laptop still don’t work and I’m not sure what I’m doing I did follow the oc dortania guide but I’m still lost, their guide is like a dang maze to me tbh
Also I have a laptop the internal Nvidia graphics stop working but the IGPU in the Intel I7 works. thus I can get video output through the VGA adapter but the internal LCD screen stays black is that something you could fix? I had it locally tested here they said the GPU is fine, it might be a switching chip which they could not test or find a replacement for. Is this something you think you could fix?
The internal power supply of my sons monitor stopped working . Can not find a replacement in stock. I do not see any busted or leaky capacitors. Should I just change out the capacitors? What should I test for first?
Thanks again for offering the info. My question is if I want do this on my elitedesk 800 G3 i7 should I follow your old videos? Or have things changed and these newer OS versions need the new way to load them?
Hello, I have a problem if I plug a usb accessory into my Mac pro 5.1 after booting, this one is not detected, I have to restart the Mac and then it appears. Could you help me, I don't know where it comes from, I am using opencore legacy patcher 0.5.3 thank you.
Does this work the same if I'm using clover config? I'm not using open core. I'm running catalina, usb ports seem to be working except for one at the back, but are slow connecting when I insert a usb stick.
hey mate are you able to tell me how to get my USB-C port speed working correctly? The USB-C ports on the front panel and the back panel both work but I am only getting 480Mbps speed out of them. Not sure how to change those speeds in Hackintool. Any help much appreciated.
hi is there an instruction video somewhere that will show me how to map my usb ports in big sur by downgrading back to catalina, and then back to big sur? i am having no luck doing it this way.
this was super helpfull, all my usb ports are now working perfect the only issue i have is that after maybe 2 or 3 hours of uptime if I send a reboot the machine get sutck in the bios logo and need to power off manually and power back on apart from that everything is working flawlessly
hi i cant get any of my usb 2 ports to register. not sure what i have done. they work on boot but not with hackintool. would you be able to help please
@@TechNolli There were a few modified bios F9x firmware revisions that were introduced on Github. To get Ventura to work properly I used the F9i version. Also in your previous Z390 bios changes you had both WIN 8/10 and WIN 8/10 WHOL in bios listed. As you mentioned, Monterey and especially Ventura have changes to Open Core and the bios that makes an upgrade difficult. I realize that no two motherboards are the same, but the Hackintosh community maybe needs a chart of these changes for upgrades. After spending close $5000 recently for a new Apple laptop for my wife, I'm sticking with Hackintosh for a while longer. Apple silicon is the way of the future. However, I love my Hackintosh for the shear amount of upgrades I can make and the internal storage device bays. The PC world is just refusing to go with the ARM based processors. Linus Totvalds of LINUX fame updated LINUX on a ARM based Macintosh recently because there is a lack of hardware based ARM PCs available. I'm expecting someone to eventually figure out an emulation of MacOS for Apple Silicon on an ARM based PC that uses LINUX as its OS. Stay tuned.
Hello, I followed this and it worked great. My issue is that my Gigabyte Z390 Aorus Pro also has a USB C port. How to do I get it working? I kept that port (SS06) as part of the 15 ports and it does now provide power to my iphone, but it does not exchange data. It seems as if the hackintosh only sees that port as a power port not as a data port. Any suggestions? Thanks so much for your videos! Between this one and your one on installing Ventura with OpenCore I've finally upgraded my hackintosh from Mojave with clover and it's works SO MUCH BETTER!!! Thanks again!
Ive been watching your videos to prep for my first hackintosh! as per ususal im going with something complicated: NZXT Z590 Motherboard (Rebranded Asrock Z590 Taichi) 10900k i9 CPU Sapphire RX6900XT Toxic Extreme GPU 64 GB (4x16) 3600 Ram SN 850 NVME I'll be making a build video as well as trying to make a step guide with what i did to get everything running. You'll be hearing from me if/when things go horribly, horribly wrong lol Thanks for keeping Hackintosh fresh!
Isn't the limit 15 ports PER controller.? There are two differents controllers in your motherboard...
after doig the checking in the kernel section and rebooting the screen goes black
does this port mapping process work for AMD too or just Intel?
Is this guide good for Catalina and for Gigabyte Z390M too?
ROG MAXIMUS XI HERO (WI-FI) You Ever Do The USB Mapping
Nice! This is awesome! I had a couple motherboards that wouldn’t show the usb controller in hackintool so I ended up using Usbtoolbox or corpbewt’s usbmap.
I tried those my usb ports on my laptop still don’t work and I’m not sure what I’m doing I did follow the oc dortania guide but I’m still lost, their guide is like a dang maze to me tbh
Thanks so much, concise, clear, and effective. Could you tell us what the other SSDT files could be used for?
good to see you back! now awaiting for the tutorial video to installing hackintosh in the new way.
Also I have a laptop the internal Nvidia graphics stop working but the IGPU in the Intel I7 works. thus I can get video output through the VGA adapter but the internal LCD screen stays black is that something you could fix? I had it locally tested here they said the GPU is fine, it might be a switching chip which they could not test or find a replacement for. Is this something you think you could fix?
Nvidia is not supported by macOS anymore.
@@TechNolli this is a PC laptop
The internal power supply of my sons monitor stopped working . Can not find a replacement in stock. I do not see any busted or leaky capacitors. Should I just change out the capacitors? What should I test for first?
What is the make and model of the PC? Or sent a pic to technollitips@gmail.com
@@TechNolli the monitor is a Sceptre X9G-NagaV, uses a NE5000A internal power supply.
I downloaded the tool from your site but it's just a bunch of files, I don't see an application to run.
Thanks again for offering the info. My question is if I want do this on my elitedesk 800 G3 i7 should I follow your old videos? Or have things changed and these newer OS versions need the new way to load them?
You should be able to, but the Monterey and Ventura have many challenges.
@@TechNolli Thank you as always!
good to see you back
Thanks Joe!
Hello, I have a problem if I plug a usb accessory into my Mac pro 5.1 after booting, this one is not detected, I have to restart the Mac and then it appears. Could you help me, I don't know where it comes from, I am using opencore legacy patcher 0.5.3 thank you.
Thank a lot, it works. I ll leave a suscription. One other question. How can I remove the EFI Icon from boot menu? maybe someone knows it! THANKS
Does this work the same if I'm using clover config? I'm not using open core.
I'm running catalina, usb ports seem to be working except for one at the back, but are slow connecting when I insert a usb stick.
thanks, very clear procedure! happy new year!
Will this method work on a Gigabyte Designare-EX X299 system?
hey mate are you able to tell me how to get my USB-C port speed working correctly? The USB-C ports on the front panel and the back panel both work but I am only getting 480Mbps speed out of them. Not sure how to change those speeds in Hackintool. Any help much appreciated.
Can you help me,
How i can hidden recovery volume while booting (bootpicker)
I am using opencore 0.8.9
hi is there an instruction video somewhere that will show me how to map my usb ports in big sur by downgrading back to catalina, and then back to big sur? i am having no luck doing it this way.
I followed your guide and my every usb ports works properly now.
Can you help about HDMI activation on i3 processors.
this was super helpfull, all my usb ports are now working perfect the only issue i have is that after maybe 2 or 3 hours of uptime if I send a reboot the machine get sutck in the bios logo and need to power off manually and power back on apart from that everything is working flawlessly
hi i cant get any of my usb 2 ports to register. not sure what i have done. they work on boot but not with hackintool. would you be able to help please
Hi. How well does Thunderbolt work in this motherboard under hackintosh?
Hackintosh can use usb hub?
Why DO NOT UPGRADE BIOS PAST F20 ???????
Gigabyte has new Bios firmwares that fix a Windows venerability that will NOT work with macOS. BEWARE!!
@@TechNolli There were a few modified bios F9x firmware revisions that were introduced on Github. To get Ventura to work properly I used the F9i version. Also in your previous Z390 bios changes you had both WIN 8/10 and WIN 8/10 WHOL in bios listed.
As you mentioned, Monterey and especially Ventura have changes to Open Core and the bios that makes an upgrade difficult. I realize that no two motherboards are the same, but the Hackintosh community maybe needs a chart of these changes for upgrades.
After spending close $5000 recently for a new Apple laptop for my wife, I'm sticking with Hackintosh for a while longer. Apple silicon is the way of the future. However, I love my Hackintosh for the shear amount of upgrades I can make and the internal storage device bays. The PC world is just refusing to go with the ARM based processors. Linus Totvalds of LINUX fame updated LINUX on a ARM based Macintosh recently because there is a lack of hardware based ARM PCs available.
I'm expecting someone to eventually figure out an emulation of MacOS for Apple Silicon on an ARM based PC that uses LINUX as its OS. Stay tuned.
do a beelink sei8 mini pc.... or a geekom mini pc.... that would be cool
Why its all internal on the type of usb...?
Hello, I followed this and it worked great. My issue is that my Gigabyte Z390 Aorus Pro also has a USB C port. How to do I get it working? I kept that port (SS06) as part of the 15 ports and it does now provide power to my iphone, but it does not exchange data. It seems as if the hackintosh only sees that port as a power port not as a data port. Any suggestions? Thanks so much for your videos! Between this one and your one on installing Ventura with OpenCore I've finally upgraded my hackintosh from Mojave with clover and it's works SO MUCH BETTER!!! Thanks again!
likewise I have the same issue so if there is any advice on how to get that working that would be awesome!
your video helps a lot. may build a hacktosh again.
Thank you so much sir.
Great as usual TechNolli, thanks a lot!
Ive been watching your videos to prep for my first hackintosh! as per ususal im going with something complicated:
NZXT Z590 Motherboard (Rebranded Asrock Z590 Taichi)
10900k i9 CPU
Sapphire RX6900XT Toxic Extreme GPU
64 GB (4x16) 3600 Ram
SN 850 NVME
I'll be making a build video as well as trying to make a step guide with what i did to get everything running. You'll be hearing from me if/when things go horribly, horribly wrong lol Thanks for keeping Hackintosh fresh!
EFI for B550I
👍 Thanks 👍
I LOVE YOU I LOVE YOU I LOVE YOU I LOVE YOU! THANK YOU SO MUCH!!!