Hi Buddy, Thank you so damn much for doing this video!! I've been planning to put a 5.5 in left on my Ford F-150 Lariat 1999, two wheel drive for over three months now! I already have the kit, wheels and tires! Seeing your Ford truck gives me a really good idea on what mine will look like! Thank You Again So much!!! Todd P.
Hey man, can you fit 35s on that 5.5 inch lift? Curious Bc I’m ordering my 5.5 for my truck and then gonna put 20x10 -24 wrapped in a 35 and wondering how well it will look
Hi B-raddaz, I'm not sure, I went with 33s and I had to trim the front finders a little. I used 17" Fuel wheels and Nitto Grapplers LT285/70R17, but after looking back I think I might could have went with 35s, maybe next time I just might. But a big thing to consider is the offset, and backspacing of the wheels, but that can be a little tricky! Being my first time doing something like this I didn't want to push it too far! I'm happy with how things turned out! If you put a front 5.5" lift on a two wheel drive It's going to change somethings, like tracking width by a inch and a half that doesn't sound like much but it can be. I ended up having to change out the upper control arms to get the camber to straighten up the wheels, to get the wheel to realign the alinement! Then I had to add 2 1/2" rear wheels spacers to get the right track width for the rear to front to line up, and have the right bulge. But a lot of that will depend on the width of tires and wheels you use and like I said the OFFSET of the wheels especially! I also lifted the rear with 3" block spacers and longer U-bolts. To look at the truck on leave ground it looks like it has a slight squat to it, and I really don't like squat, so my plan is to add 2 more inch's to the rear, here soon, and my truck has a camper shell on it, the weight of it may have robbed me 2" ! I bought the lift kit on Ebay and they have a lot to choose from, but please do the research before you do any modification to your truck, a lot depends on it!!!! I researched my project for a long time before I did anything!!!! It sounds like a lot to do, but not really, it's mostly planning!! So, good luck to you, have fun with it, because it can be worth it In the end!!!! Good luck, and I hope this has been helpful to you!! Todd P./USA
I love how even though the Chevy is louder, the Ford is still louder inside. Just goes to show the advancements in noise cancellation for in the interior have, well, advanced over the years
Perfect wheel for this truck. Personally would have gone with a slightly less aggressive tire (trail grapps or something like that) but to each their own. Nice setup
Doggo's always add joy to the vids. Not a Ford guy myself, but thats an admirable truck with the wheels. Baby Squat looks better with the current rims it has on instead of the new mudders... Thats just my opinion though..
Saahhhh dude. Spindle lift on a 2wd pushes the wheel hubs out so that’s why the caps don’t fit. I got a 2005 ranger as well as the 18 Rado and just did a 3” spindle lift with 33” Toyo MTs and 16” black Pro Comp wheels looking just like your wheels. Looks good bud. Yeewww! 👌🏼🤘🏼2wd trucks better for prerunning anyways!
Where did you get them? I want to upgrade my 16 inch wheels on my 2001 f150 but I don’t want to spend an unsure amount for bigger wheels, Is there a link?
I know it’s been awhile since this video was posted, but did you have to use aftermarket upper control arm adjustment cams or did the stock hardware have enough adjustment to get it aligned?
Hey! Love the Larry videos as I just picked up a 97 F150 supercab flareside 4x4. Any issues with the hub bore on these wheels? I was looking at the 16x8s and it looks like they have an 87 mm hub bore and custom offsets shows the truck requiring an 87.1 mm hub bore. Any input would be appreciated. This video kind of has me leaning towards the 16x10s. Thanks
Forgive me for being ignorant, would this size wheel fit a non lifted or leveled 99 f-150? Would like to get this set up then eventually get it lifted. Thanks!
Yo Imfscrew Larry Your Ford F150 you need mods do Exhaust Straight pipe and Get the Windows Tint 5%Percent new Headlights LED and Taillights Led you will be good to go I love your 2018 Chevrolet Silverado Baby squat and Black Chevrolet Silverado 2500HD Duramax Diesel and Larry F150 truck Awesome build keep it up with good work Buddy TH-cam video so cool
Problem is with these F-150's the factory tint is a mirror finish. You can put limo behind it but if you tint the front glass it doesn't match the back because of the mirror finish. I wanted to get an F-150 like this but I want one without OEM tinted glass so I can make the tint match without having to replace the back 3 windows.
I say sell the graps an go a complete different route. Keep the bullet holes. Put some cooper cobras on the an do a 2/4 or 3/5 drop on it. Low an wide. Do something you really aint done before. You already got two lifted trucks. Do something old schoolish
Lets see how old Larry does in a mud hole or down a dirt trail. Looks beefy. Do you have a trac-lok rear end? Hopefully you do or he ain't doing much in the slippery shit with 2wd and open diff.
Should definitely swap over to the 99-03 front bumper, and ford lightning clear headlights, will completely change the look of the front end
Finally some grapps. Now cut those cats👏 🏠
Alabama Cateye right!!!!
Looking classy love them rims and tires 🤙🇺🇸
Hi Buddy, Thank you so damn much for doing this video!! I've been planning to put a 5.5 in left on my Ford F-150 Lariat 1999, two wheel drive for over three months now! I already have the kit, wheels and tires! Seeing your Ford truck gives me a really good idea on what mine will look like!
Thank You Again So much!!!
Todd P.
Hey man, can you fit 35s on that 5.5 inch lift? Curious Bc I’m ordering my 5.5 for my truck and then gonna put 20x10 -24 wrapped in a 35 and wondering how well it will look
Hi B-raddaz, I'm not sure, I went with 33s and I had to trim the front finders a little. I used 17" Fuel wheels and Nitto Grapplers LT285/70R17, but after looking back I think I might could have went with 35s, maybe next time I just might. But a big thing to consider is the offset, and backspacing of the wheels, but that can be a little tricky!
Being my first time doing something like this I didn't want to push it too far! I'm happy with how things turned out!
If you put a front 5.5" lift on a two wheel drive It's going to change somethings, like tracking width by a inch and a half that doesn't sound like much but it can be. I ended up having to change out the upper control arms to get the camber to straighten up the wheels, to get the wheel to realign the alinement! Then I had to add 2 1/2" rear wheels spacers to get the right track width for the rear to front to line up, and have the right bulge. But a lot of that will depend on the width of tires and wheels you use and like I said the OFFSET of the wheels especially!
I also lifted the rear with 3" block spacers and longer U-bolts. To look at the truck on leave ground it looks like it has a slight squat to it, and I really don't like squat, so my plan is to add 2 more inch's to the rear, here soon, and my truck has a camper shell on it, the weight of it may have robbed me 2" !
I bought the lift kit on Ebay and they have a lot to choose from, but please do the research before you do any modification to your truck, a lot depends on it!!!!
I researched my project for a long time before I did anything!!!!
It sounds like a lot to do, but not really, it's mostly planning!!
So, good luck to you, have fun with it, because it can be worth it In the end!!!!
Good luck, and I hope this has been helpful to you!!
Todd P./USA
This brings back the memories I had with my f150 1999 4wd before I rolled it multiple times. Amazing build my man keep up the wonderful work bud!
looks great cant wait to see what is next for larry
It took a few minutes to warm up to the new wheels on Larry. I like it. Especially slappin’ those on baby squat!!! 👍🏽💯
Looks good but I think it woulda looked sick on different stocks and grapps
This build is making me buy a 98 to 03 f150 2wd extended cab and do the same
I love how even though the Chevy is louder, the Ford is still louder inside. Just goes to show the advancements in noise cancellation for in the interior have, well, advanced over the years
You're so confident behind the camera. I'm a new sub, and already love the content and channel 🤞 keep it up brotha
That thing looks perfect👌🏻
Bubba trok szn boyz 🤠
She looks so clean everything matches🔥
Looks awesome 👍🏼 not a lot of people do that look anymore. Great choice!
Perfect wheel for this truck. Personally would have gone with a slightly less aggressive tire (trail grapps or something like that) but to each their own. Nice setup
Funny coming back to your vids with the stock wheels. Liking how far you’ve brought the build 👍
Wheels and tires do make a difference.
Love this I got a truck just like it 2wd with a 3 inch lift and I’m running 20x14 with 34s!!!! Wide
Was expecting different but looks hella good
How does this video only have 1k likes
38's on 15's is my favorite, but this ain't bad.
Larry is the reason I subscribered. I have an 02 F 150 regular cab short bed and I want the same wheels just not the tires 👍👌
Looks great lovin the build already
YES!!! This is exactly what I hoped you were gonna do! It literally looks like a completely different truck. Excited to see why else you do to it
Got a 2001 same truck but 4wd. Love these trucks
Looks great brother, love your videos! Keep it up man, God bless 🇱🇷
Ole Larry looking good 👍
Doggo's always add joy to the vids. Not a Ford guy myself, but thats an admirable truck with the wheels. Baby Squat looks better with the current rims it has on instead of the new mudders... Thats just my opinion though..
Looking good, and nice “age appropriate “‘ setup
I like it. I got 18x9, wrapped in 275/60/18 duratracs.
Great choice. Looks awesome.
Bro, I love how you film literally everything like pulling the duramax out of the garage and stuff like that
Holy sh*% that looks good, and you went with the OG look.
Truck looks hella clean with those tires
What set up for you recommend for a stock version of the truck? (Suspension wise)
Saahhhh dude. Spindle lift on a 2wd pushes the wheel hubs out so that’s why the caps don’t fit. I got a 2005 ranger as well as the 18 Rado and just did a 3” spindle lift with 33” Toyo MTs and 16” black Pro Comp wheels looking just like your wheels. Looks good bud. Yeewww! 👌🏼🤘🏼2wd trucks better for prerunning anyways!
Spindle lift has nothing to do with the center caps fitting but I appreciate it man!
Those are slick!!!! Love them !!!!!
Love the trucks. love the vids. Keep up the good work. And please bawg the 150
Where did you get them? I want to upgrade my 16 inch wheels on my 2001 f150 but I don’t want to spend an unsure amount for bigger wheels, Is there a link?
If you get it let me know please! I have a 01 F150 too and I want this set!
Hell yeah looks amazing. Tow mirrors. Would set it off
Bubba trucks are the new wave🔥
Yeah buddyyy! Rollin on old school...
Sheeeeeshhh 🔥🔥🔥 It’s literally perfect.
Was not expecting that but looks damn good
now this...this i fucks with
Love the nittos looking mean
That truck will look even better if or when you tint the windows
Soooooon
I'm gonna have to start making videos on my truck now! 98 f150 4x4 on 5" rcx lift.
I’m not a Ford guy but that’s a bad ass setup
I know it’s been awhile since this video was posted, but did you have to use aftermarket upper control arm adjustment cams or did the stock hardware have enough adjustment to get it aligned?
nice tires. looks goofy having them on a 2wd. buddy has 2 nice 4x4s and one on street tires but has a 2 wheel drive on a super aggressive mud tire
How does it look weird on a 2wd lmao unless you crawl under each one you would never know if they are 2 or 4.
Clean classic mean look
NO WAYYYYY!!!! I have a red 1998 F-250 (look it up) and i have the same wheels! but they aren’t as clean lol. I’m looking into getting a lift
Hey! Love the Larry videos as I just picked up a 97 F150 supercab flareside 4x4. Any issues with the hub bore on these wheels? I was looking at the 16x8s and it looks like they have an 87 mm hub bore and custom offsets shows the truck requiring an 87.1 mm hub bore. Any input would be appreciated. This video kind of has me leaning towards the 16x10s. Thanks
Lookin mint! 👌🏼 Love your vids man!
14:20 I believe you channeled Joe Dirt there buddy! 😆
Forgive me for being ignorant, would this size wheel fit a non lifted or leveled 99 f-150? Would like to get this set up then eventually get it lifted. Thanks!
Looks great!
Solid axle swap and covert to 4x4, and coyote swap it. Go all out with some some crazy build stuff
Yo Imfscrew Larry Your Ford F150 you need mods do Exhaust Straight pipe and Get the Windows Tint 5%Percent new Headlights LED and Taillights Led you will be good to go I love your 2018 Chevrolet Silverado Baby squat and Black Chevrolet Silverado 2500HD Duramax Diesel and Larry F150 truck Awesome build keep it up with good work Buddy TH-cam video so cool
Thank you!
No problem Imfscrew
Tint!!!! 🤤
Problem is with these F-150's the factory tint is a mirror finish. You can put limo behind it but if you tint the front glass it doesn't match the back because of the mirror finish. I wanted to get an F-150 like this but I want one without OEM tinted glass so I can make the tint match without having to replace the back 3 windows.
Looks great
LARRY!!! ANYBODY SEEN LARRY???
Love the seat cover. Where can I find those? Love watching Larry’s videos. I have a 2001 f150 supercrew. Motivates me
Take the black thing off under the bumper. Adds more ground clearance
I say sell the graps an go a complete different route. Keep the bullet holes. Put some cooper cobras on the an do a 2/4 or 3/5 drop on it. Low an wide. Do something you really aint done before. You already got two lifted trucks. Do something old schoolish
I wanna do 16” steelies like this with mud tires on my 01 Ford F-150. You think it would fit fine with a 2” leveling kit?
This dude must make good money at his job😂😂
Brycen Harper that’s what I’m saying bruh dude got 3 nice trucks and I can’t even afford a truck😂
Facts😂
Great video man! I want to get those wheels for my 20003 Dodge Ram. Hey where did you get that hat? It’s cool looking
Dual straights with no cats for Larry
hey man, where did you buy the seat covers or get it done like that ??
My favorite generation of f150s. They catch a lot of shit, but my 2000 was the best vehicle I’ve ever owned.
same here. lots of people say they were ugly. i love mine tho. it has 325xxx miles. best vehicle i have had.
Lets see how old Larry does in a mud hole or down a dirt trail. Looks beefy. Do you have a trac-lok rear end? Hopefully you do or he ain't doing much in the slippery shit with 2wd and open diff.
Maby some rock lights. Or light bar too
If you can you ought to put them wheels on baby squat. On Larry you should go for more of a work truck look like a toolbox and rails.
What did you have to trim to keep it from rubbing
This is gas ❗️
Get a brush guard please😊
In Govt rn this is better then class
Dang bro your editing is great!
Minty 👌🏼👌🏼👌🏼
Aye man I have a 2001, I can’t find em for 5x135mm lug. Any idea where I can find em?
Love the look but you gone hate them grapps once they start wearing some. I'm 16 and I hated my grapps lol
I've had 2 sets. I love them.
Ig if you like them that's all that matters. I'm not fan of that loud of a roar
where’d you get your camo seat covers
I have Almost the exact setup with my ford but the wheels are black and it’s got a facelift 😂
Beautiful scenery what state are you in ?
does it rub ? if so when does it rub
You gonna be famous one day
You think 315/70/17 fit on a 2001 f150 3” lift kit?
What size wheels spacers did you put on?
Try claybar on your truck will make it look better
Do you have a lift or level kit
Aye boss I have a 2001 F150 I know you post this video a while back but where'd you find those rims im trying to find a good set for my pick up?
to this day I still don’t know where her got them lol. I have a 2WD 01 F150 and I want to get these too
Badass
Where do I get these wheels at
You still never said what happened to the OBS. I dig the new truck but for real what happened to the OBS
I’m curious what happened to the headliner, like like Freddy Krueger wents crazy.
It got torn from putting stuff inside and the ac doesn't work so it takes a beating from the wind with the windows down lol
lmfscrew lol, hey the truck still looks great!
Did you lift the back any or is it stock?
Stock rear
Are those 5x135 ? I can't find any online
1year ago you can see Larry in the 20 degrees cold start video
Yea, like i said in the first video I've had it for a while.