Classic Mini Project - Rear End Rebuild - Part 2

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ธ.ค. 2024
  • After a fair amount of thinking and staring, I take on the task of aligning all the separate panels in the hope they’ll go together nicely . . . . . . They Don’t!!!!!!

ความคิดเห็น • 6

  • @tones61
    @tones61 6 หลายเดือนก่อน +1

    Nice work there nick🚗👌
    May I suggest a bottle jack between the length of wood and the inner tub?
    Thanks your informative and humourus vids buddy 😊👍

    • @NickThornhill
      @NickThornhill  6 หลายเดือนก่อน

      That’s a good idea, I was also looking at other stuff. However I’ve done some measuring and may have found the problem, I’ll verify my theory today hopefully.

  • @1BCamden
    @1BCamden 6 หลายเดือนก่อน +1

    At least the sun is shining, always a brain scratcher, me I would only worry about overall alignment (front to back) good progress though, stick at it

    • @NickThornhill
      @NickThornhill  6 หลายเดือนก่อน +1

      Will do. Back at it again today, hopefully get something filmed too.

  • @ClassicCooper
    @ClassicCooper 6 หลายเดือนก่อน +1

    Not that it makes a huge difference…but whilst test fitting you could use a couple of 1mm pieces of metal under your boot hinges to act as a shim and bring it inline to where the hinge panel will be when fitted. Last thing you want is a leaky back side!

    • @NickThornhill
      @NickThornhill  6 หลายเดือนก่อน

      That’s a good shout. Thanks.