great video. Typically what I do when I get a seized nitro engine is once I've filled it up with the wd40 and got it to spin I completely strip and clean the engine out because the usually get all gummed up inside from the nitro and 2 stroke oil mix solidifying in the bottom of the engine and in the bearings. It gets quite nasty and gross in there especially if the last time it was run the exhaust was blocked in order to shut the engine off because that just fills them with nitro until they stop running.
not many people making content on nitros any more so keep up the good work and keep on bringing old nitros back to life
Thanks so much, Its a dying side of the hobby which is a shame so we will do our best to keep it alive!
great video. Typically what I do when I get a seized nitro engine is once I've filled it up with the wd40 and got it to spin I completely strip and clean the engine out because the usually get all gummed up inside from the nitro and 2 stroke oil mix solidifying in the bottom of the engine and in the bearings. It gets quite nasty and gross in there especially if the last time it was run the exhaust was blocked in order to shut the engine off because that just fills them with nitro until they stop running.
Thanks! thats probably what happened to ours as thats how I turn the engine off!
Theres a difference between seized and gummed up engines.
If there gummed up from my experience it’s usually from the oil in the fuel been left for a long time.
🎉🎉
Thanks!
🤩🤩👍👍🥳🥳🥳🇹🇭🇹🇭
Thanks!
❤😂🎉😢😮😅😊. ไฟแอดพ์. ?
Tanks!!