How to Wire MULTIPLE 12V LED Rocker Switches [Simple Guide and Wiring Explanation]
ฝัง
- เผยแพร่เมื่อ 31 ส.ค. 2020
- Quick and simple How to Wire 12V LED Rocker Switch - Simple Guide and Wiring Explanation. In this how-to video I how you How to Wire multiple 12V LED Rocker Switch. 💲Rocker Switches amzn.to/3dkH6h2 There's a bunch of different LED Rocker Switches out there, sometimes called Carling Switches and they vary between 2, 3 ,4 5, 6 and even 7 pins!
In this simple guide video I show you any easy explanation of how to wire up a 12v LED Rocker switch so you can get on with powering up your new Lightbar, spot lights, pump, camera or whatever else you are powering. Enjoy :)
⚡️Keen to support future content?⚡️
🎁 VSMH shop - www.videoshowmehow.com
🙏Check-out channel membership, Super Chats & Super Thanks
---------------------------------
💲 Parts from Video
---------------------------------
Rocker Switches - amzn.to/3dkH6h2
Check out the channel the single rocker switch explanation here ► • HOW TO Wire 12V LED Ro...
------------------
📱 Socials
------------------
I▶ www.videoshowmehow.com
I▶ Instagram - videoshowmehow
I▶ Facebook - videoshowmehow
I▶ TikTok - videoshowmehow
-----------------------------------------------
👍 About VideoShowMeHow
-----------------------------------------------
⏩ What's with the gloves?
Not after any TH-cam fame here which is why I'm not in the vids - they're not about me they're about the how-to! I used the gloves for the first couple of projects I filmed which just happened to be messy ones and it kinda just became a thing - easy to spot my videos! If that's not your thing and you'd prefer to watch a face, all good, I won't be offended, there's plenty of better looking ones to watch already on TH-cam ;)
⏩ Where did this start?
I really enjoy tinkering with different projects - they usually require a whole bunch of research and learning along the way. It's satisfying on doing a thing and standing back and going 'Yeah! Totally did that!'. I had a bunch of mates asking 'how did you know how to do that?' and 'I couldn't never do that myself so I thought; I need to start something where I can help others that might be thinking the same thing :)
⏩ What will you find here?
The purpose is simply to make these videos as top quality and helpful as I can. They will always be free, there's ZERO agenda and the only motive is to try and upload what I would want to watch to help with that particular project. I'm also keen to keep building this little community and will try to answer all questions when asked - fire away :)
#rockerswitch #ledrockerswitch #12vswitch
Disclaimer:
VideoShowMeHow assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from the information contained in this video is the sole responsibility of the user and not VideoShowMeHow. VideoShowMeHow cannot guarantee against improper use or unauthorised modifications of this information.
CHECK-OUT ALL THE 12v VIDEOS HERE 😃 ->
Uhm. The meter is upsidedown
Finally! A tech guy speaking clearly and succinctly. Thanks mate, well done
If your only using the switches as a signal wire to a relay could you daisy chain all the positives together and run it off a dash light wire to then shut the whole thing down once the key is off ( talking side by side situation) cheers.
The photo of the episode doesn’t show up in the video. Can you tell us what’s going on in that shot?
This is basically a relay driver...
Question.I understand this video. But how would I connect blue tooth speaker to a switch. My speakers have three wires coming from them. I’m using the same set up in this video
Why the red connector at the end of the line?
Great video, exactly what I was looking for to wire the rocker panel. Now on to learn how to wire the relay. Thanks
Great instruction. I'm wiring up a 5 switch box for my RTV SxS, which includes a USB charger and volt meter. To prevent parasitic drain, I want to put the USB and voltmeter on the last switch so it has to be on for them to work, and then can shut off when not in use. I also want to wire the small LED indicator lights to this switch so they come on when the switch is on too as it would be the first one I turn on. It is a bit of a puzzle. Then I'll change switches to use a whip switch, and ground light switch in there places,
How do I do it for dedicated circuits I don’t want anything daisy changed bc the stuff I have uses amps so I need separate how would I do that.. all the videos I’ve seen are on the same circuits but I need four different circuits
Just what I needed! Replacing 8 rocker switches on a 1998 Armada deck boat. Your video and clear narrative put things together for me. The only difference in my situation is placing a breaker between sets of 2 switches.
Excellent! I'm going to be doing some switches in my boat and this was the best spent 10 minutes so far!
Simple, direct, very useful !!
Wow he made it look so easy. Brought my confidence up
Wow - incredible video! Thank you SO much for this! I'm doing switches in a 1971 Volkswagen Buggy/Kit Car and this awesome info will be put to some fun use! Great work
Your method of daisy-chaining is awesome!
Great video. Never would have thought to use that technique for the daisy chain. Cheers!
Great video! It gave me an idea for my project. Looking forward to getting it done. Thanks
Beautiful presentation