Great video sir, thank you!! I will be replacing mine this winter on a 2007 Ram. I would recommend going one step farther and replacing the Pressure and Return hoses as well as the Cooler hoses (if equipped) and don't forget to bleed the system.
Gracias my hermano !!! Tengo una blanquita igual mismo modelo mismo motor y lo q me dijiste de la rosca y poner la terminal igual y los gasquets de plástico fue genial y esa confianza q me diste de siempre decir SIMPLE yo mismo lo puse quite y puse y Perfecto solo la llevare a alineación y llantas NEW y listo !!! GRACIAS!! Me ahorre 245 Dlls !!!!
Great Video! You are an awesome motivational speaker. As I was working in mine and having issues breaking loose the fasters right off the start, I would just think you saying “ you can do it “. Thanks brother…
Thanks followed your video yesterday changed my rack. Saved 500 bucks. You omitted a couple parts which would have been helpful which is how to get the rack out. Had to take tire off and it comes out from left. But overall 👍
@@jmathews470 damn bro you really were committed to making dude acknowledge that he made a mistake in spelling the title so you could laugh about it one more time. Tell me if I spell this correctly “douche bag”
I wonder if it failed because they had the wrong fluid in it, I have to replace mine plus the pump this weekend and the previous owner had used power steering fluid instead of atf4, yeah dodge uses atf in the power steering 🙄
I agree seen a few videos for the dodge rack and pinion and they all had power steering looking fluid come out instead of the red atf+4 fluid just did my leaking rack on my 04 and it was red
Do you have to apply a certain amount of torque to nuts when adding them back on? Thanks for the vid, very thorough. I've been watching tons of repair videos lately and doing things myself and saving thousands. Keep up the great uploads!
Yes. You do. It should be 235 ft lbs. Make sure you do that. Your steering is important. Tie Rod ends 45 ft lbs. Pressure Hose 23 ft lbs. Return hose 52 ft lbs. Maintain your vehicles by the service manual and stay safe. Here is a free download for the service manual as well www.mediafire.com/file/8k5u7yi4olsck17/2004_Dodge_Ram_Factory_Service_Manual.pdf/file
Whenever possible use the specific torque specs. Tight enough can lead to nuts and/or bolts that shake loose or you could over tighten things stripping threads or snapping bolts.
Thanks for the video, but if you lived in New England, it's gonna more than a crescent wrench. My return hose would not loosen up. I had to remove the hose from the cooler and then spin the hose to get it off. Then I tried to loosen the nut on the pressed on fitting and tore the aluminum pipe. Ugh! Time for a new return hose.
Bro I can’t believe how easy y’all got it wrenching on cars that don’t see salt and snow. I woulda rounded off every single bolt I touched with that crescent wrench lol. Got her done though real smooth and showed the important parts good video. Fuckin Bobby full of shit!
I just put my rack in and when the steering wheel is straight the tie rod threads are extremely uneven. One side has over an inch of threads showing and the other has no threads showing. If I loosen the steering coupler at the rack, it only goes on one way. It’s like my steering is half a turn off. When I turn the steering wheel, it turns farther one way than the other. How can I correct this? 2003 dodge ram 1500 4wd
Great video sir, thank you!! I will be replacing mine this winter on a 2007 Ram. I would recommend going one step farther and replacing the Pressure and Return hoses as well as the Cooler hoses (if equipped) and don't forget to bleed the system.
Gracias my hermano !!! Tengo una blanquita igual mismo modelo mismo motor y lo q me dijiste de la rosca y poner la terminal igual y los gasquets de plástico fue genial y esa confianza q me diste de siempre decir SIMPLE yo mismo lo puse quite y puse y Perfecto solo la llevare a alineación y llantas NEW y listo !!! GRACIAS!! Me ahorre 245 Dlls !!!!
Nice job,,,you probably could do an engine job with a crescent wrench,,,
Great Video! You are an awesome motivational speaker. As I was working in mine and having issues breaking loose the fasters right off the start, I would just think you saying “ you can do it “.
Thanks brother…
explained nicely and good sense of humor keep up the good work thank you
Thanks followed your video yesterday changed my rack. Saved 500 bucks. You omitted a couple parts which would have been helpful which is how to get the rack out. Had to take tire off and it comes out from left. But overall 👍
Glad to hear it really help you watching my video.
This is what I get to do this weekend. Thanks for the video.
Thank you for the video. You gave me the confidence to do it myself this weekend on my son's truck.
Yes sir if I can do it you can do it 💪🏼
@@aaronmobilemechanictv7841 ola amigo es el mismo proseso con una nissan quest
Good video. High pressure side is always the smaller diameter hose.
when you chingon perica y martillo all its needs..
"Sometimes I let one loose" haha, I hear that bro, same here!
Better out than in yeah lol 😆
A f150 dodge ram. Brother you have a 1 of 1. The only one ever built.
You really think I did a good job on that video ?
@@aaronmobilemechanictv7841 hell yeah bro, but there is no such thing as a f150 dodge ram.
Lol 😆 oh shit my bad I didn't realize that I but a f there
@@aaronmobilemechanictv7841 hahahaha 😆😂
@@jmathews470 damn bro you really were committed to making dude acknowledge that he made a mistake in spelling the title so you could laugh about it one more time. Tell me if I spell this correctly “douche bag”
4:04 Best part of the whole video...lol
Ram f150, that's new😂
You are chingooooooooon homi
Good job congratulations
I wonder if it failed because they had the wrong fluid in it, I have to replace mine plus the pump this weekend and the previous owner had used power steering fluid instead of atf4, yeah dodge uses atf in the power steering 🙄
I agree seen a few videos for the dodge rack and pinion and they all had power steering looking fluid come out instead of the red atf+4 fluid just did my leaking rack on my 04 and it was red
Thank you it was very good and helpful
Do you have to apply a certain amount of torque to nuts when adding them back on? Thanks for the vid, very thorough. I've been watching tons of repair videos lately and doing things myself and saving thousands. Keep up the great uploads!
No just tighten up
Yes. You do. It should be 235 ft lbs. Make sure you do that. Your steering is important. Tie Rod ends 45 ft lbs. Pressure Hose 23 ft lbs. Return hose 52 ft lbs. Maintain your vehicles by the service manual and stay safe.
Here is a free download for the service manual as well
www.mediafire.com/file/8k5u7yi4olsck17/2004_Dodge_Ram_Factory_Service_Manual.pdf/file
Whenever possible use the specific torque specs. Tight enough can lead to nuts and/or bolts that shake loose or you could over tighten things stripping threads or snapping bolts.
Yes and no... it’s complicated lol
Just watch your, and good job, young man.
Thanks for the video.
Thanks for the video dude! Do you need to bleed the power steering system after replacing the rack and pinion?
Oh my goodness this was helpful! Thanks sooo much!
Thanks for the video, but if you lived in New England, it's gonna more than a crescent wrench. My return hose would not loosen up. I had to remove the hose from the cooler and then spin the hose to get it off. Then I tried to loosen the nut on the pressed on fitting and tore the aluminum pipe. Ugh! Time for a new return hose.
Please Don't forget to Like 👍🏼 this video comment down share and Subscribe thank to support my channel
Thank you very much for the video I did it because you motivated me to do it I use la perica
"You can do it" for me lol. That would be great! 🤣😂
Lmfao them frogs 😂😂😂😂 great video bro
Great job 👍 sire
Aye good video bro this has been very helpful you got a new subscriber
Thank you for supporting my channel please share it. It will help to others
lmfao 😂 them frogs be sneaking up on every mechanic I know.
Bro I can’t believe how easy y’all got it wrenching on cars that don’t see salt and snow. I woulda rounded off every single bolt I touched with that crescent wrench lol. Got her done though real smooth and showed the important parts good video. Fuckin Bobby full of shit!
Good stuff huh
Mahalo brother nice video, love learning the Spanish to.
Thanks bro this video helped alot
Se puede cambiar el rack on pinion con la camioneta asi o se necesita levantar es mire que no la levanto con gato
Si necesitas el gato
Thanks for helping. I appreciate it very much.
good video rbo, thank you
Best how to video ever. Thanks!
Ya instalada ocupa purgar las líneas o no gracias
Good video
Great video
I just put my rack in and when the steering wheel is straight the tie rod threads are extremely uneven. One side has over an inch of threads showing and the other has no threads showing. If I loosen the steering coupler at the rack, it only goes on one way. It’s like my steering is half a turn off. When I turn the steering wheel, it turns farther one way than the other. How can I correct this? 2003 dodge ram 1500 4wd
Don't snugg the tie rod end make sure there real tight use a torque wrench
Can you tell me where you found this exact part ? How much was the part ?
Autozone
When you take the hoses off does the power steering leak all the fluid in the reservoir?
Yeah it will just get something ready to clog the hole.
I didn't know there was a wrench impact lol
Necesito el gato para combiar el rack y pinion o Haci se puede hacer ?
El Gato vas a nesitar
@@aaronmobilemechanictv7841 y le puedo dejar las llantas puestas ?
Si VA estar un Poco complicado
What you call a crescent wrench in Spanish,,,,sounds cool,,,
It call in Spanish una perika Subcribe to my channel I will appreciate Give a Huge thumbs 👍
Nice
I noticed you didn't have to jack the truck up to install. What did you use the floor jack for?
No I didn't the truck was high already
Great video!!
Couldn't you just count the turns when you take off the old tie rod?
It's easier just measure it why eyeball
They tend to get loose
T
Eeehaa
Eeehaa 🤠
Lol