My 18 month old LOVES farmer Grayce! Her dad is a farmer and the girl LOVES going out to see the tractors and ride in the skid loader! We tease that she will be “Farmer Harper” I love that she has a female farmer to look up to! You are great!
It’s how you learn! 800 is to fine. 400 is good. Lifting is normal when you don’t use a sealer, let it cure, sand it, and just repaint….perhaps a sealer on those spots and let that cure before topcoat. Keep at it!
your method of taping is 100% correct. I've painted hundreds of cars with my brother when he was alive. And it may not affect you because of what your painting, we did cars, which are lower to the ground, so we spilled buckets of water on the floor around and under the vehicle so when painting down low it didn't kick up any dust from the floor, and the overspray would settle on the water. We always started from the top down. I would have primered the whole vehicle and it all needs to be scuffed and sanded so the paint has a surface to stick too.
It's lookin good guys, just a thought ...after priming your burn through spots if you guys use a self etching sealer that should give you a good base so the top coat won't react, plus it will bond well to the truck
The paint lifting is likely caused by a few things. Partially not your fault. 1, when you don’t put some sort of primer or sealer over old lacquer truck paint you will have those solvent lifts. Also, always wipe the surface down using a wax and grease remover. Be careful when using the Bondo Spot filler since it’s a lacquer base. It will cause lifts as well. Another possibility would be from applying the paint too wet and fast. You want to apply medium wet coats and allow 10-15 minutes “flash” time in between coats.
It would help to pre-spray your surface with Bulldog Adhesion Promoter that will give it a tack for the paint. Also, any surface that is sanded to the base needs to have a couple of coats of primer!
Fun fact: I'm working on a large US air base in Germany and we have the same ladder in our office as you use in the Mack videos. Seems to be a pretty common product in the US. 😅 R.I.P. Winston 😢 I think you would have been better off using a proper degreaser and not the glass cleaner to clean the truck. Maybe the bubbling would not have happened then... Btw., I loooooooooove the color so much! I have copper-colored rims on my car. 🤘🏻
Enjoy your show,i used to farm 16 yrs. worth ,had to get a job at a corp currently work at Vermeer a machinist started out on the paint line, anyway good luck to you!
Damn, Grayce is something else, just so damn gorgeous, like wow Gavin is one lucky dude, don’t ever let that one get away. She is my kind of girl, I’d give anything to find a girl like Grayce.
Wish I would have watched when I first saw this. First thing the whole truck should have been washed, then wiped down with paint thinner. Then whole truck sanded with 220 so new paint can grip. They have small foam spreaders for spot putty. Never heard of using glass cleaner. Might be ok for after sanding. Plus you need to wipe down with tack rags right before painting. Don’t be surprised when you see fish eyes In about a year, from using that fuel heater. One last thing, paint from top to bottom. Good Luck ❤️🤍💙🇺🇸💥
Looks like old Winston got into something he shouldn't have. Or maybe just didn't want to do sanding ?! Anyway, as you were teasing us with the paint colors, I was saying "oh please let it be burgundy", and you kinda heard me ! Color #2 would be my choice, but it sounds like you've decided against either of them in the end ? And I'm not a painter, but it looked like the paint maybe reacted with those areas that bubbled up like paint remover does ? Maybe use a primer/sealer over the whole cab before the top color ? Again, just stuff I've heard and learned during my 75 years living on this chunk of rock ! I like the learn-as-you-go attitude though, really. That's how I've survived after quitting school after 9th grade. There goes MY credibility, right ?😂 Anxious to see what you end up with--it'll be cool I'm sure 🙂
Bryan from Texas. Do you have a water/ oil separator in line. That does look like chemical reaction like a paint remover. But stay at it.Tryinig is better than not doing anything.
as a colour-blind person, your two "mystery" colours looked the same! No idea what the colour(s) are, but they looked bronze(ish) to me. Keep up the good work
Nice love the home made paint booth Grayce but it should have had the incoming air being filtered so as not to suck in dust from the outside. But still it is very good
Gd people will just say whatever on here even though they have no clue. Your paint lifted. It can happen for several different reasons and to heavy is one of them. However sanding the entire truck again was not necessary chances are you had 24-48 hours if not longer to top coat what you sprayed without having to sand.You did the right thing and stopped once you noticed the problem. Since you did sand it all. I would spray a sealer aka primer sealer over the whole thing, then spray my color, then spray my clear. Allowing sufficient flash time between coats recommended by whatever brand paint you are spraying. Always remember when you see a problem just stop. It’s always fixable in the moment. Once you spray clear you’re married to it at that point. For the internet know it all’s I’ve been painting classic cars since 2007 with multiple show winners to back up my work.
Probably the base coat was reactivated by the sanding which is a different brand of paint than what you wanting to apply. Unfortunately it’s real hard to repaint over unless it’s all resealed with a primer that’s the same brand of the new paint you gunna apply. Also if you ground the truck to the concrete floor it will help get rid of the dust particles in the air .
Hey girl, take that plastic and put it directly into the trashcan. Buy yourself some white in color or silver to reflect light cheap plastic tarps and hang them on conduit just like you would do on a shower curtain and you can open them and close them much easier than trying to roll something up. Also, did you see the big puff of smoke that came out of the water heater when you first started it? That is no good using diesel fuel around paint work because of the dirt and oil it puts into the air what causes fisheye on your paint surface also, it’s hard to breathe after a while so use kerosene only. Cost more money, but is better for your health and the end product on your paint job . Just trying to help a girl out. Sincerely Heavy D from Pittsburgh ✌️😎💪🇺🇸
I was giong to say the glass cleaner is what caused that never seen that done before and i have painted quite a few cars and trucks always use a tack cloth to final wipe it before painting laquer thinner will do that with enamel paint need enamel reducer for the paint
The Paint * Puckering* is caused by the Thinners in your new paint Reacting on the original paint. Usually suggests the original paint was ENAMAL and the Thinners you are using is for LAQUEER based paints Check wot your Primer is ( there are more than one type) and use their suggested Primer
Sorry. Should of said Use a PRIMER and THINNER to suit going over ENAMEL also to suit wot your Final Top Coat is going to be. ENAMEL again. Or. LAQUER based In the past I have used wot they call UNIVERSAL THINNERS ( does both paint types ) with no problems
@briansatchell2319 you also trained in fire science? I hand a coworker get burned real bad! Him and my uncle were burning up our old camp on a helicopter unit and he went to pour burn mix out of an un lided 5 gal. Bucket on a fire burning blk plastice and caught the bucket on fire and exploded on him
So much prep work! 😅 The two-tone color will look awesome.
My 18 month old LOVES farmer Grayce! Her dad is a farmer and the girl LOVES going out to see the tractors and ride in the skid loader! We tease that she will be “Farmer Harper” I love that she has a female farmer to look up to! You are great!
What a simp😂
Winston looks like he is HIGH from paint fumes. The two colors looks AWSOME. good luck to ya.
Your channel has grown so big!! Congratulations on your awesome success.
She’s finally back!
It’s how you learn! 800 is to fine. 400 is good. Lifting is normal when you don’t use a sealer, let it cure, sand it, and just repaint….perhaps a sealer on those spots and let that cure before topcoat. Keep at it!
Truck is looking good
Always nice to see you
Robert here in California waving a hand. See you next time
Fun to watch this video. It takes a lot of patience to attempt what you are doing. RIP Winston! I hope you guys have a great holiday!
your method of taping is 100% correct. I've painted hundreds of cars with my brother when he was alive. And it may not affect you because of what your painting, we did cars, which are lower to the ground, so we spilled buckets of water on the floor around and under the vehicle so when painting down low it didn't kick up any dust from the floor, and the overspray would settle on the water. We always started from the top down. I would have primered the whole vehicle and it all needs to be scuffed and sanded so the paint has a surface to stick too.
"Cause I'm that good" Priceless. I never had luck painting , if I was using a gas heater. Heat lamps !!
That Bondo application is chef's kiss! 👌 Watching the truck transform step by step is so satisfying. Can't wait to see the final result! 🚛✨
It's lookin good guys, just a thought ...after priming your burn through spots if you guys use a self etching sealer that should give you a good base so the top coat won't react, plus it will bond well to the truck
I greatly admire hard working people.
Merry Christmas Grayce ❤
Beau travail bravo je suis francais passionner des camions américains jadore ces mack il ont une allure un style particulier cest des super camions
Looking good!!! I say this a lot but Grayce your an absolute boss farmer lady!! Keep up the hard work we appreciate everything y'all do for us.
If you wrap the string right around the conduit you can still use a string to raise and lower it.
Another awesome vid! Merry Christmas!
Merry Christmas to you and your family
Love that shade of pink on your finger nails... very Girly . 👍🙂
Hi framer grayce happy holidays❤
The paint lifting is likely caused by a few things. Partially not your fault. 1, when you don’t put some sort of primer or sealer over old lacquer truck paint you will have those solvent lifts. Also, always wipe the surface down using a wax and grease remover. Be careful when using the Bondo Spot filler since it’s a lacquer base. It will cause lifts as well. Another possibility would be from applying the paint too wet and fast. You want to apply medium wet coats and allow 10-15 minutes “flash” time in between coats.
It would help to pre-spray your surface with Bulldog Adhesion Promoter that will give it a tack for the paint. Also, any surface that is sanded to the base needs to have a couple of coats of primer!
Good project. Good music.
Merry Christmas Grayce and Gavin!!!!
Fun fact: The Mack R Model was a workhorse in the 80s, especially for long hauls and construction. A classic choice for restoration! 💪
I just subscribed i found your channel today and great videos and happy new year to you and your family grace
Fun fact: I'm working on a large US air base in Germany and we have the same ladder in our office as you use in the Mack videos. Seems to be a pretty common product in the US. 😅
R.I.P. Winston 😢
I think you would have been better off using a proper degreaser and not the glass cleaner to clean the truck. Maybe the bubbling would not have happened then...
Btw., I loooooooooove the color so much! I have copper-colored rims on my car. 🤘🏻
Enjoy your show,i used to farm 16 yrs. worth ,had to get a job at a corp currently work at Vermeer a machinist started out on the paint line, anyway good luck to you!
Looks pretty jazzy to me Mrs lady Grayce ❤
Love the sound of your Cummins 😍
That's nasty
Damn, Grayce is something else, just so damn gorgeous, like wow Gavin is one lucky dude, don’t ever let that one get away. She is my kind of girl, I’d give anything to find a girl like Grayce.
Use acetone or thinner to wipe down the truck before you paint.
Love from Denmark ❤❤❤
Happy New Year to you
Painting can be a pain in the butt. You need heat lamps. Take care and have a blessed and safe week
I feel bad that you and Gavin had a set back, guess that’s how it goes, can’t wait to see the finished project!!
Iam a train driver from germany. Loove the content🤙🎄💞☃️
Wish I would have watched when I first saw this. First thing the whole truck should have been washed, then wiped down with paint thinner. Then whole truck sanded with 220 so new paint can grip. They have small foam spreaders for spot putty. Never heard of using glass cleaner. Might be ok for after sanding. Plus you need to wipe down with tack rags right before painting.
Don’t be surprised when you see fish eyes In about a year, from using that fuel heater. One last thing, paint from top to bottom.
Good Luck ❤️🤍💙🇺🇸💥
Looks like old Winston got into something he shouldn't have. Or maybe just didn't want to do sanding ?! Anyway, as you were teasing us with the paint colors, I was saying "oh please let it be burgundy", and you kinda heard me ! Color #2 would be my choice, but it sounds like you've decided against either of them in the end ? And I'm not a painter, but it looked like the paint maybe reacted with those areas that bubbled up like paint remover does ? Maybe use a primer/sealer over the whole cab before the top color ? Again, just stuff I've heard and learned during my 75 years living on this chunk of rock ! I like the learn-as-you-go attitude though, really. That's how I've survived after quitting school after 9th grade. There goes MY credibility, right ?😂 Anxious to see what you end up with--it'll be cool I'm sure 🙂
Bryan from Texas. Do you have a water/ oil separator in line. That does look like chemical reaction like a paint remover. But stay at it.Tryinig is better than not doing anything.
Did y'all do a post mortem on Winston to determine a cause of death?
Good morning Grayce heavy nice day.. ❤️😘
You need to primer seal the truck then wet sand and paint
You and the stud can do it you must be in love
Wet the floor down before painting and it keeps all the dust down when walking or dragging hoses on floor
Good Paint for you Truck and a good Time
as a colour-blind person, your two "mystery" colours looked the same! No idea what the colour(s) are, but they looked bronze(ish) to me. Keep up the good work
Nice love the home made paint booth Grayce but it should have had the incoming air being filtered so as not to suck in dust from the outside. But still it is very good
moin.. moin... Wünsche dir einen schönen Tag.. bleib wie du bist.. 😜
Merry Christmas Grace I live in bardstown Kentucky
You have to use a sealer application on that old paint.
Grayce: Breanna we need some good music. Breanna: I got you fam. 🤣
Fuell oil and paint does not mix
RIP Winston ! 😢😢
You are so pretty and beautiful ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
I understand what is going on I had to sand a tractor down 2 or 3 time before I got it painted good
We have one painted and ready to go back on the frame which is painted as well. Then we can rewire everything. It's a 1978 KW
Hi Winston!!
RIP Winston
my Harley was root beer and black, that looks very close to root beer.
i love you farmer grayce
Gd people will just say whatever on here even though they have no clue. Your paint lifted. It can happen for several different reasons and to heavy is one of them. However sanding the entire truck again was not necessary chances are you had 24-48 hours if not longer to top coat what you sprayed without having to sand.You did the right thing and stopped once you noticed the problem. Since you did sand it all. I would spray a sealer aka primer sealer over the whole thing, then spray my color, then spray my clear. Allowing sufficient flash time between coats recommended by whatever brand paint you are spraying. Always remember when you see a problem just stop. It’s always fixable in the moment. Once you spray clear you’re married to it at that point.
For the internet know it all’s I’ve been painting classic cars since 2007 with multiple show winners to back up my work.
Santa will be better this year. p.p.😁😁😁
Your pink nails are cute.
It is very cool for me you Videos in KI in Germany because i cant not all words unterstand in you Langwisch super 👍😀see you läter
What are you trying to say 😂
@@Stupidfastracing Are you a little slow?
@@Stupidfastracing why didnt you make that remark in german? He already said his english is bad. Only 17% of the world population speak english.
Lets see you write in german @@James-kd7dc
@@Stupidfastracinghe says the video is very cool, he us from Germany and no5 very good in our language (English)
Hey Grayce Tell Winter to start making TH-cam vids again! 💪💯😎
سلام
روزتون به خوبی و خوشی
خسته نباشی از نقاشی
موفق باشی عزیز 🌺🌺🌺🙏🙏
Paint is a different mouse 🐁 . When it started missing up stop and we mix the paint with more paint less thinner and bander.
🤔do you know how to drive a semi Mack truck Grayce🤔
Probably the base coat was reactivated by the sanding which is a different brand of paint than what you wanting to apply. Unfortunately it’s real hard to repaint over unless it’s all resealed with a primer that’s the same brand of the new paint you gunna apply. Also if you ground the truck to the concrete floor it will help get rid of the dust particles in the air .
Sei grande...🇮🇹✋
That’s a nice Truck
OOOooo gavin her stud
Ive painted a bunch of them. 😂
Hey grace what kind of heater are you using?
Hey Grayce would you get the Mack Anthem or Mack Ch truck
Diesel heater fumes
Too bad you couldn’t make that into a heated/ insulated shop with tin roof and walls . Would be better for winter work.
Like the color
Truck is looking good so far
Thin to win
Winston is a cute little mouse
Merry Christmas ftom Bloomington Indiana JESUS SAVES ❤️
Hello grayce
Hey girl, take that plastic and put it directly into the trashcan. Buy yourself some white in color or silver to reflect light cheap plastic tarps and hang them on conduit just like you would do on a shower curtain and you can open them and close them much easier than trying to roll something up. Also, did you see the big puff of smoke that came out of the water heater when you first started it?
That is no good using diesel fuel around paint work because of the dirt and oil it puts into the air what causes fisheye on your paint surface also, it’s hard to breathe after a while so use kerosene only. Cost more money, but is better for your health and the end product on your paint job .
Just trying to help a girl out. Sincerely
Heavy D from Pittsburgh
✌️😎💪🇺🇸
I was giong to say the glass cleaner is what caused that never seen that done before and i have painted quite a few cars and trucks always use a tack cloth to final wipe it before painting laquer thinner will do that with enamel paint need enamel reducer for the paint
Exactly as I said. Its the Wrong Thinner The * original paint job * would be ENAMEL and they are Thinning the Primer Coat with a LAQUERE Thinner
The Paint * Puckering* is caused by the Thinners in your new paint Reacting on the original paint. Usually suggests the original paint was ENAMAL and the Thinners you are using is for LAQUEER based paints Check wot your Primer is ( there are more than one type) and use their suggested Primer
Sorry. Should of said Use a PRIMER and THINNER to suit going over ENAMEL also to suit wot your Final Top Coat is going to be. ENAMEL again. Or. LAQUER based In the past I have used wot they call UNIVERSAL THINNERS ( does both paint types ) with no problems
Hey you don't take to me no more
RIP Winston
too much thinner to paint which is causing the issue also tho paint to to air ratio
What's the color going to be
Hi Winston 😂
Puffin a Winston drinking a 4-0 I'm Kid Rock and I'ma let you know
Shouldn't spay a think coating. You should thin than go back add more sfter it started dry. Put layer on
2 things I’m thinking the fumes from the heater and the cleaner u used possibly but your doing good u will get I’m sure
IPA or Prep by Gyeon.
I thought every state had the same law!
I hope Winston was not your blue canary. Watch the CO levels!
❤❤❤❤❤❤
Becareful with heat and plastic! It can catch fire and the bad part is tgat youncant see it burning until its to late!
Exactly. I would not of let the heater on and buggered off into town. Shitt she was lucky
@briansatchell2319 you also trained in fire science? I hand a coworker get burned real bad! Him and my uncle were burning up our old camp on a helicopter unit and he went to pour burn mix out of an un lided 5 gal. Bucket on a fire burning blk plastice and caught the bucket on fire and exploded on him
17,000 views in one day? Miss Grace you are popular, J. David
Sorry about Winston. 💔
old paint needs to be sealed before your new color, the thinner in the new paint is lifting the edges of the old paint