Thank to your video, I saved my pool from disaster. After working on cleaning it for one week and using HTH Green to Blue, my pool is now swimable again!
You did an awesome job with the presentation on this video. Its so many videos out there that never get to the point. I talking in general not just for HTH green to blue. I had purchased this & then found ur video. I love using youtube to help me with stuff. I wish we had more people like u that show u every detail from start to finish. Its to many people that get off the subject & then forget to give important details. Two thumbs up for u. Thank You
After flocculant is added and distributed through recirculate and algae and debris settles on the bottom, vaccum pool but you MUST vacuum to waste to bypass the filter the productvworks wonders 😉
You were supposed to put the brown powder in your basket and turn your pump on "to pool" / recirculate (so the powder is evenly distributed in a fine powder at the top of the water helping drag the algae down to the bottom) I just did it and forgot to switch the pump to recirc...had to backwash to get the stuff out of my filter sand then restarted the pump to run on recirc only for 1 hour. Them let the pool sit til tomorrow
@Blake Horn Basically we want to mix the powder into the water as well as possible. If your pool has recirculate (skipping the filter) then you can dump the powder into the skimmer/basket, however a lot of people do not have recirculate, in my case it was best to sprinkle the powder all over the pool. Let the pump runs for 3 - 4 hours while brushing / mixing up the pool water, algae, chemicals, etc... then turn it of overnight to let all the sediments clumps up and settle at the bottom of the pool.
I came here looking for this solution. I didn’t read the bag and dumped it in. Now my filter is running weird. Do you know if this will ruin my sand filter?
@@LinzLovesBingo No I don't think it will ruin your sand filter. I used to have a sand filter at my previous home, it is very long lasting. One for the powder coagulate / clumps up together the algae and dirt into more solid material. You were not suppose to suck that into your filter. If you have already, it is too late, you probably have to change the sand in your sand filter to restore the filtering efficiency of your sand pool filter. Buying replacement sand is cheap: amzn.to/3gaJeMq but the labor / time of draining and replacing the sand may cost more than material.
@@DIYGEEKTEXAS I ran the filter when I first put it in so I don’t think it had time to clump up. There wasn’t algae. It was getting cloudy and did it as preventative maintenance. Filter will stay off until I can vacuum it all up. I feel stupid. I always read the directions. Not this time though. 🤦🏻♀️
I hooked the end of the vacuum hose to the skimmer. However you need to have a spout to dump the dirty water out instead of having it go through your pool filter and back to your pool. Here is a separate video how to install drain spout / hose bib. th-cam.com/video/te07f_4taIw/w-d-xo.html
Good video but a couple suggestions 1 put in shock powder and circulate for 1 hr them put in orange floculant " fallout" circulate for 2 hrs tundra off pump and let set over night the be easy setting up backwash vaccume pole and hose and slowly vacuum bottom trying not to disturb areas nearby and I think you will be even more pleased with this product I have used many may times
if you read the instructions they say to put the powder in the SKIMMER ONLY! But like everyone else I only watched the vid so I certainly hope it doesn't have any negative effects to my pool! Lesson learned I will read directions carefully and not just watch the video!
If your pool has a recirculation mode at the pump and valve, you can put it in the skimmer. My pool does not have recirculation if I put the powder in the skimmer most of it will get trapped in my pool filter. The goal is to get the powder mixed into the pool water anyway best you can.
What do you use to vacuum after this that doesn’t cost an arm and a leg. I have a basic above ground pool and normally just use the little vacuum that attaches to the hose. But it isn’t picking up the “brown dirt” at the bottom.
hi there, i loved the way you cleaned the pool, i am living in Katy TX too and have the same issue now. question? i have 20,000+ gallon pool, so one box of that product should be enough? also did you apply the second powder right after you pour the first powder? also i my pool dont have circulation, so if i run the filter for 1 hour is ok? thanks
Yes, 1 box of the product from HTC green to blue should be enough, my pool is around 25000 gallons I think. Yes also on the second question, I did not remember waiting between first and second powder. I do remember having to wait until next morning to let the powder mix and clump up with the algae. Hmm if you pool have no recirculation try to run only 30 min but you would want to try to mix up the powder yourself using your pool brush. Basically it is like adding sugar to your tea. You need to mix it up, but don't want to get those powder stuck on your pool filter.
@@DIYGEEKTEXAS awesome, I bought the package from Walmart today and will do exactly as in video. Hope to get the same results as yours. Thank you so much.
Hi I need help I did this and my pool is brown still I bought a vacuum at Leslie pool supply but when I put it in there it just mix’s everything help please I have and above pool 3300 gallons
How did you prevent the sediments from spreading all over your water again? That’s the issue I’m having. Could it be because I’m using a vacuum head with brushes?
Do not use brush or vacuum head with brush. You will end up disturbing the sediments and mixing them up with your clear water. Use a flexible swimming pool vacuum head like this one instead: amzn.to/3959EPl
After you add flocculent you should mix in the water for only 30 min, then you should turn off your pump, keep the water still to let the heavy flocculent (which should be attached to the algae and stuff) to sink down to the bottom.
@Joey Yick Stop the robot vacuum. The robot vacuum can not vacuum (filter) enough to remove the algae from the water. You have to just vacuum/suck the bad algae water out of your pool. If you pool pump valve does not have DRAIN, you need to use regular vacuum head like I showed in video, or watch this video about using vacuum from skimmer: th-cam.com/video/JERKpM1Yg94/w-d-xo.html If all of the above is not possible, rent / buy a sump pump like this one ( amzn.to/3ORwREe ) to vacuum the algae sediments at bottom of pool.
What do you mean by unplugged? After dumping all the powders, you need to mix the powders. Circulating using the pump is one way. Another way is to use your brush and lots of manual labor :-(
@@DIYGEEKTEXAS 4 in 1 is another shock powder that they sell at department stores. It doesn't have the brown powder that makes algae sink to the bottom but it's supposed to shock the pool and clear the water. I've used it and it is a good shock treatment all in one.
I don’t think that’s what instructions says. Need to mix the 1s bags first while pump off with brush, then put the pump in circulate only, not going through filter, and then dump 2s bag and let it run 1 hour then let it sit for next day. But whatever, as long as it works.
Worse thing I ever did to my pool skip that brown stuff it just floats all around ruined my summer been fighting that brown stuff all summer it’s now July do not buy this it’s a mess still waiting to get in my pool
Thank to your video, I saved my pool from disaster. After working on cleaning it for one week and using HTH Green to Blue, my pool is now swimable again!
Wow the HTH literally pulls all the algae together, kind of satisfying to watch the algae being vacuumed. Good job!
Great instruction, you saved me a lot of time reading and making sure this green to blue stuff works
Hey man thanks for making this video my pool was green now it is crystal blue again
You did an awesome job with the presentation on this video. Its so many videos out there that never get to the point. I talking in general not just for HTH green to blue. I had purchased this & then found ur video. I love using youtube to help me with stuff. I wish we had more people like u that show u every detail from start to finish. Its to many people that get off the subject & then forget to give important details. Two thumbs up for u. Thank You
Thank You!
Thank you! You just saved me from messing it up. Beautiful yard!
Thanks for posting this video, it helped me fix my pool water
Tying this out now. We shall see what my pool looks like tomorrow!! Thanks for the video.
After flocculant is added and distributed through recirculate and algae and debris settles on the bottom, vaccum pool but you MUST vacuum to waste to bypass the filter the productvworks wonders 😉
Your video was awesome You Explain Everything well, we Tried it & had great Results Thanks to your Video Much Thanks ❤️
Your video helped with my project to rescue my green pool! LOL
Buy HTH Green to Blue to fix your pool water? Please use my Amazon link below to help my channel:
✅ ✅ 🔥 amzn.to/3P34rtU
Thanks!
i know it's kinda randomly asking but do anybody know of a good site to watch new series online ?
@Hayden Nathaniel Flixportal =)
@Jagger Javion thanks, signed up and it seems like a nice service :) I really appreciate it !
@Hayden Nathaniel Glad I could help :)
Do you know if my pool is green if a pool guy would take on weekly service?
Great instructions thanks for making this vid
You were supposed to put the brown powder in your basket and turn your pump on "to pool" / recirculate (so the powder is evenly distributed in a fine powder at the top of the water helping drag the algae down to the bottom)
I just did it and forgot to switch the pump to recirc...had to backwash to get the stuff out of my filter sand then restarted the pump to run on recirc only for 1 hour.
Them let the pool sit til tomorrow
@Blake Horn Basically we want to mix the powder into the water as well as possible. If your pool has recirculate (skipping the filter) then you can dump the powder into the skimmer/basket, however a lot of people do not have recirculate, in my case it was best to sprinkle the powder all over the pool. Let the pump runs for 3 - 4 hours while brushing / mixing up the pool water, algae, chemicals, etc... then turn it of overnight to let all the sediments clumps up and settle at the bottom of the pool.
I came here looking for this solution. I didn’t read the bag and dumped it in. Now my filter is running weird. Do you know if this will ruin my sand filter?
@@LinzLovesBingo No I don't think it will ruin your sand filter. I used to have a sand filter at my previous home, it is very long lasting. One for the powder coagulate / clumps up together the algae and dirt into more solid material. You were not suppose to suck that into your filter. If you have already, it is too late, you probably have to change the sand in your sand filter to restore the filtering efficiency of your sand pool filter. Buying replacement sand is cheap: amzn.to/3gaJeMq but the labor / time of draining and replacing the sand may cost more than material.
@@DIYGEEKTEXAS I ran the filter when I first put it in so I don’t think it had time to clump up. There wasn’t algae. It was getting cloudy and did it as preventative maintenance. Filter will stay off until I can vacuum it all up. I feel stupid. I always read the directions. Not this time though. 🤦🏻♀️
Dude, thank you SO MUCH!!!
I have been frustrated for weeks
This worked like a charm
Hi. Another question, my pump also don't have circulation, where did you hook your vaccum blue hose? Did you hook to skimmer filter?
I hooked the end of the vacuum hose to the skimmer. However you need to have a spout to dump the dirty water out instead of having it go through your pool filter and back to your pool. Here is a separate video how to install drain spout / hose bib. th-cam.com/video/te07f_4taIw/w-d-xo.html
Good video but a couple suggestions 1 put in shock powder and circulate for 1 hr them put in orange floculant " fallout" circulate for 2 hrs tundra off pump and let set over night the be easy setting up backwash vaccume pole and hose and slowly vacuum bottom trying not to disturb areas nearby and I think you will be even more pleased with this product I have used many may times
Awesome thanks for your suggestions
How do you plug the vacuum up to suck with out putting it back in the pool?
@@vanessaquintana6670set the filter to waste
I use it often.. cheap and effective 🎉
Loved your video.pinch a penny wanted $800 to do my 36 ft by 18 ft kidney shape pool which holds 25,000 gallons of water.
Thank you, that was really helpful. You are right, the instructions on the box aren’t easy to understand.
if you read the instructions they say to put the powder in the SKIMMER ONLY! But like everyone else I only watched the vid so I certainly hope it doesn't have any negative effects to my pool! Lesson learned I will read directions carefully and not just watch the video!
If your pool has a recirculation mode at the pump and valve, you can put it in the skimmer. My pool does not have recirculation if I put the powder in the skimmer most of it will get trapped in my pool filter. The goal is to get the powder mixed into the pool water anyway best you can.
Calm down lol
I think it did great ! Good job!
Thanks for the video using it tonight
Your video helped thanks so much 🙏
Does this work on pools with cartridge filtration?
Yes it does. Make sure you bypass the filter while vacuuming the sediments. Otherwise your cartridge will be clogged
Awesome video! You saved my pool!
So when you vacuum it where does the green stuff go if there’s no filter to catch it
Vacuum output to storm drain (thrown away)
What do you use to vacuum after this that doesn’t cost an arm and a leg. I have a basic above ground pool and normally just use the little vacuum that attaches to the hose. But it isn’t picking up the “brown dirt” at the bottom.
I have an above ground as well and we connect the vacuum to the filter and put it on backwash n it works really well
@@bshorty522 how you connected it ?
Great Video... can I have a link to both your hand and robot vacuum? I need a good one
hi there, i loved the way you cleaned the pool, i am living in Katy TX too and have the same issue now. question? i have 20,000+ gallon pool, so one box of that product should be enough? also did you apply the second powder right after you pour the first powder? also i my pool dont have circulation, so if i run the filter for 1 hour is ok? thanks
Yes, 1 box of the product from HTC green to blue should be enough, my pool is around 25000 gallons I think. Yes also on the second question, I did not remember waiting between first and second powder. I do remember having to wait until next morning to let the powder mix and clump up with the algae. Hmm if you pool have no recirculation try to run only 30 min but you would want to try to mix up the powder yourself using your pool brush. Basically it is like adding sugar to your tea. You need to mix it up, but don't want to get those powder stuck on your pool filter.
@@DIYGEEKTEXAS awesome, I bought the package from Walmart today and will do exactly as in video. Hope to get the same results as yours. Thank you so much.
Awesome! Just applied this product to my pool and I’m waiting to see how It looks tomorrow! Do you have a link to your vacuum?
I used a simple pool vacuum head like this one: amzn.to/3BSv3or
Hi I need help I did this and my pool is brown still I bought a vacuum at Leslie pool supply but when I put it in there it just mix’s everything help please I have and above pool 3300 gallons
Did the sediments falls to the bottom of the pool after 24 hours?
For best results you need to vacuum to WASTE (out of the pool/into your yard) especially if you have a cartridge filter.
How did you prevent the sediments from spreading all over your water again? That’s the issue I’m having. Could it be because I’m using a vacuum head with brushes?
Do not use brush or vacuum head with brush. You will end up disturbing the sediments and mixing them up with your clear water. Use a flexible swimming pool vacuum head like this one instead: amzn.to/3959EPl
@@DIYGEEKTEXAS makes sense, thank you!!
Going to get this vacuum head ordered thanks so much for info great
@@jezzisaidit Thank you for your support!
@@DIYGEEKTEXAS your welcom
it works but you better have a automatic pool sweeper
Why did all the flocculent float to the top for me? And now a light green
After you add flocculent you should mix in the water for only 30 min, then you should turn off your pump, keep the water still to let the heavy flocculent (which should be attached to the algae and stuff) to sink down to the bottom.
@@DIYGEEKTEXAS thanks for replying. I did do that.... I found out I added to much...
I put hth for 24 hours, the algae was exactly sink into the bottom of pool. But after I put robot vaccum, the water got milky again. Afar should I do?
@Joey Yick Stop the robot vacuum. The robot vacuum can not vacuum (filter) enough to remove the algae from the water. You have to just vacuum/suck the bad algae water out of your pool. If you pool pump valve does not have DRAIN, you need to use regular vacuum head like I showed in video, or watch this video about using vacuum from skimmer: th-cam.com/video/JERKpM1Yg94/w-d-xo.html
If all of the above is not possible, rent / buy a sump pump like this one ( amzn.to/3ORwREe ) to vacuum the algae sediments at bottom of pool.
Your pool area is beautiful
Thank you 😊
HTH Green to Blue has changed the box design, but it still works the same way. Here is the new box design: amzn.to/3P34rtU
Awesome video and instructions ❤
How did it turn so green? Kind of cool with the lagoon vibe
@Maui Leilani this is a pool not a lagoon / lake LOL
What vacuum u used? How do u use it?
I am using a regular vacuum head and 30 foot hose that connects to my skimmer.
Vacuum head: amzn.to/3wltOMS
pool vacuum hose: amzn.to/3l3hyeM
Thanks. Gave me an idea.
Great instruction
My pool water is too green, I have added 7 packets of advanced shock 1 but after 12 hrs the water looks still green, what to do here any suggestions?
My pool won’t circulate how can I do it leave pool unplugged
What do you mean by unplugged? After dumping all the powders, you need to mix the powders. Circulating using the pump is one way. Another way is to use your brush and lots of manual labor :-(
@@DIYGEEKTEXAS pump won’t circulate
Filter and backwash work but circulate pouring water out waste hose
@@harrisharris9790 another way to vacuum or pump out dirty water is using a sump pump. Not sure about the hose size probably 1.5 inch or 2 inches
Did you use regular vacuum from pool?
Vaccuum to waste people a robot will just stir it all back up and ruin your hard work. Same as vacuuming to recirculate.
Snot or slime, I'll be doing clean up tomorrow 😮😮
Wait how about 4 in 1 does that work in 24 hours
@Will's Channel What is 4-in-1? Is that another product to test?
@@DIYGEEKTEXAS 4 in 1 is another shock powder that they sell at department stores. It doesn't have the brown powder that makes algae sink to the bottom but it's supposed to shock the pool and clear the water. I've used it and it is a good shock treatment all in one.
I don’t think that’s what instructions says. Need to mix the 1s bags first while pump off with brush, then put the pump in circulate only, not going through filter, and then dump 2s bag and let it run 1 hour then let it sit for next day. But whatever, as long as it works.
The second powder goes in the skimmer
Worse thing I ever did to my pool skip that brown stuff it just floats all around ruined my summer been fighting that brown stuff all summer it’s now July do not buy this it’s a mess still waiting to get in my pool
What did you do to get rid of the brown in your pool??
Balance pH, vacuum to waste
I felt that Texas has gone through a lot of shit
Not as much as California. LOL
My pool went from green to brown!
Brown means you are still not killing the algae (not enough chlorine). Try adding pool shock (powder).
Just read the instructions on the box. LOL
SOME TIMES ALLL I THAInk ABOUT IS YOOOOOUUUUUUuUu
didn't work for us
You should vacuum to Waste
Seems like Shock and Flocculant
That look like unspeakable old house
Hellllllllp!!!!!!
The power cords with lights hanging over the pool are a safety hazard. I hope no one gets fried.
They are plugged into gfci and afci outlets