So I added lights like these on my 2018 F-150 but there the OPT7 Sidekick ones & whenever I have my truck on & idling the turn signals/hazards flicker every few seconds but when I have the key in the ACC position they work just fine & no flicker. I did tap/splice into my mirrors for the turn signals. I don’t the have the running lights hooked up yet either. Any clue what could possibly be going on? Any feedback on that would be great!
Want to send a thank you to Goodwin Customization. We may have found an alternative solution to a problem, but would never have done so without their pointing us down a path.
@@goodwincustomization2493 Good morning I know it's been a while since you made the video I've been watching it and I still can't get it how you add the relay. I did a sidekick sequential turn signal light on the running board it's only work when I open the doors. I ran the white on the reverse and I tap on the signal light those 2 doesn't work. Please help me if you can appreciate it. I already have a 12v relay in hand .
We used the yellow wire with purple stripe to trigger the relay coil. When you unlock the truck with the key fob, the relay buzzes like the voltage is right near the switching point. Did you use the same wire to trip the relay?
I don't remember off hand what color I used to trigger the relay. I think I mentioned it in the video. I do get a buzz when the running board lights go off on there own.
So I tapped into the cargo light, white /tan wire, but now the cargo and led lights won't come on . I. Assuming I need a 12v relay or 6v relay to boost up the voltage??
When I installed them without the relay the running board lights and the dome lights still worked. I'm thinking the dome light wire isn't making the connection if it's not going on. I used a 6v relay and the dome light acting as the switch for the running board lights.
@@goodwincustomization2493 I solder the connections. When I realized and the lights weren't working I disconnected the battery again and reconnected the cover light came back on but as soon as I unlocked the vehicle the LED strips flashed on and then off, and stayed off. Will a relay work for this problem? What kind of relay should I be using?
I wired them, so they are white to light up the steps and then they shut off. The Amber's go on with the turn signals. You can wire them to stay amber when driving.
@@goodwincustomization2493 Sorry to be a pest. I found them once on Amazon, and chose instead a DC-DC voltage converter with 3-11 volt input and 12volt output. The lights started flashing over 11 volts. I have tried to find them again on Amazon, and am not having success. If you could send me a link I would be thankful.
@@stevefournier8910 www.amazon.com/dp/B00DK899DI/ref=cm_sw_r_cp_apa_fabc_Q4FFFJE3B8WFWW3XEAB1 And www.amazon.com/dp/B0002ZPUMG/ref=cm_sw_r_cp_apa_fabc_GKC55E71Y34ZQ7VMY0ZX?_encoding=UTF8&psc=1
Do you have to connect the turn and amber runnung light to the relay as well?
Wow your video was the only one I could find about adding the relay to make the dome light work with led strips!! Thank you so much brother!
No problem, glad I could help.
I just ran mine to backup lights
So I added lights like these on my 2018 F-150 but there the OPT7 Sidekick ones & whenever I have my truck on & idling the turn signals/hazards flicker every few seconds but when I have the key in the ACC position they work just fine & no flicker. I did tap/splice into my mirrors for the turn signals. I don’t the have the running lights hooked up yet either. Any clue what could possibly be going on? Any feedback on that would be great!
Discovered that if you use the bed lighting wire, to drive the white LED's, that you don't need the relay. It is white with a brown stripe.
Hey man do you have a link or something for this? I’ve been trying to find this set up. Wanting the amber turn signal but the white running
Want to send a thank you to Goodwin Customization. We may have found an alternative solution to a problem, but would never have done so without their pointing us down a path.
I'm glad I could help.
@@goodwincustomization2493
Good morning I know it's been a while since you made the video I've been watching it and I still can't get it how you add the relay. I did a sidekick sequential turn signal light on the running board it's only work when I open the doors. I ran the white on the reverse and I tap on the signal light those 2 doesn't work. Please help me if you can appreciate it. I already have a 12v relay in hand .
We used the yellow wire with purple stripe to trigger the relay coil. When you unlock the truck with the key fob, the relay buzzes like the voltage is right near the switching point. Did you use the same wire to trip the relay?
I don't remember off hand what color I used to trigger the relay. I think I mentioned it in the video. I do get a buzz when the running board lights go off on there own.
So I tapped into the cargo light, white /tan wire, but now the cargo and led lights won't come on . I. Assuming I need a 12v relay or 6v relay to boost up the voltage??
When I installed them without the relay the running board lights and the dome lights still worked. I'm thinking the dome light wire isn't making the connection if it's not going on. I used a 6v relay and the dome light acting as the switch for the running board lights.
@@goodwincustomization2493 I solder the connections. When I realized and the lights weren't working I disconnected the battery again and reconnected the cover light came back on but as soon as I unlocked the vehicle the LED strips flashed on and then off, and stayed off. Will a relay work for this problem? What kind of relay should I be using?
Why did you use a 6v relay instead of a 12v relay?
Where did you connect the relay?
in the olden days we use to use a resistor👍👍
Do they stay white when driving or do they go straight to the orange color when u start driving?
I wired them, so they are white to light up the steps and then they shut off. The Amber's go on with the turn signals. You can wire them to stay amber when driving.
Where can I buy that same product for my dads 2017 GMC Sierra DENALI? Thank you
Whats the brand of the light kit?
You used the door switch wire to trigger the relay, do you remember what color this was?
What color is the passenger turn signal?
Both driver and passenger side turn signals are yellow. Running board lights are white.
@@goodwincustomization2493 I meant the wire in the door
@@dhrides2314 I don't remember the color, but it is in the same location on the passenger plug as the driver side plug.
My strip won't completely light up on signal flash, so I disconnected the signal wire.
When I signal the light only traveled halfway up the strip.
You might have an internal broken wire.
@@goodwincustomization2493 it's a great running light otherwise.
Where did you find the 6v relay?
Amazon
@@goodwincustomization2493 Sorry to be a pest. I found them once on Amazon, and chose instead a DC-DC voltage converter with 3-11 volt input and 12volt output. The lights started flashing over 11 volts. I have tried to find them again on Amazon, and am not having success. If you could send me a link I would be thankful.
@@stevefournier8910 www.amazon.com/dp/B00DK899DI/ref=cm_sw_r_cp_apa_fabc_Q4FFFJE3B8WFWW3XEAB1
And
www.amazon.com/dp/B0002ZPUMG/ref=cm_sw_r_cp_apa_fabc_GKC55E71Y34ZQ7VMY0ZX?_encoding=UTF8&psc=1
Where did u get the led strips? What brand?
I got them from a website called Goodyled.
Buyer beware. My lasted less than a year. Customer service was just awful!