but id take it apart if the cylinder looks good just sand it a bit and put a new piston an rings and it'll fix the low compression if it has low compression it doesn't pulse the carb and it doesn't run good if when you rev full throttle its screems kinda outa control and you can't richen it up to slow it down means there a air leak could need crank seals or carb boot that can also makd it run lean and scar pistion
Hey bill i have used rivnuts insert for many years of a whole lot of things i have never had any issues i love them looks like your hole looks a bit big for the insert what i would do for the odd one i would melt some new plastic into the hole and re drill it
Enjoyed all the little projects, thanks for sharing ! Have a blessed day !
I really respect people who don't swear. I loose respect for them who has to swear all the time. Keep up the clean content. It'll pay off in the end👍
Next time use Permatex black plastic welder from Princess Auto. It hardens like a rock in 10 min and can be drilled, sanded or filed.
Billstmax loves the snow lol
You may be able to compress those rings with a worm type hose clamp,has worked for m
i have one of them battery powered pocket pump from crappytire theyre great use it for my mower
is the pressure set too low for the air drill? or maybe the filter is clogged.
but id take it apart if the cylinder looks good just sand it a bit and put a new piston an rings and it'll fix the low compression if it has low compression it doesn't pulse the carb and it doesn't run good if when you rev full throttle its screems kinda outa control and you can't richen it up to slow it down means there a air leak could need crank seals or carb boot that can also makd it run lean and scar pistion
I’m sure someone has mentioned it but you are supposed to close the tool all the way when your crimping them on.
that was about it. I think it would over crimp with the plastic as the backer.
Hey bill i have used rivnuts insert for many years of a whole lot of things i have never had any issues i love them looks like your hole looks a bit big for the insert what i would do for the odd one i would melt some new plastic into the hole and re drill it
good ole princess pretty cheap for feuses better then paying $23.00 each at a auto parts store
I swear everyday I love saying the F word the S word and the B word
I like swearing, that's because I swear most of the time.
I don't mind swearing, but when every other word is a curse. No thanks.
lol i curse when nothing works right or falls apart or break downs lol