yes they do, thanks, like I said on the vid, am not sure if these are the metal or plastic ones, but these are kind of heavy so I might have the metal ones they are hard to bend, am not sure I might be wrong, theres a part number for reference, good luck :)
You have to just pull it off idk why you didn’t just pulled it off right when you did it, not sure how would you do it upside down when you have it in front of you but when you realized that you were actually able to remove it without having any trouble.
Lol 😂 well you going to have to pull it off and when you do the tape is more than likely going to stay on the car you got clean it off and add more double sided tape to put it back on.
Hey bro, I recently purchased these fender emblems. Just wondering if you’d know how long they would last? I’m assuming bc they’re OEM like the Hellcat and Scat badges, they’d be on there for years. Would they last weekly car washes and rain/snow?
They were still on when I sold the car and they were on there for already years. And yes they will last weekly washes. Just have to make sure the are where you putting them on is clean so they can stick on and stay on the car.
Do you still own the challenger and are the badges still attached..im asking cause i just bought a set but ive hesitated to put them on i was afraid they wouldn't stick good enough
No I don’t have it anymore, it’s been a few years now, I made a video about it, just measure 📐 a few times before sticking it to the car. If the surface it’s cleaned n prep right they will stay in it for a while
Well you measure where you want it and how far from the body line also it comes with adhesive already, if still don't know how to put it on, then well just have a shop or dealership do it.
@@triple_threat_lightz Ummmm, factory never puts a "model emblem" of the car front grill badge on the front, the left fender and right fender all at the same time.......justify it all you want but don't flat out make shit up. As a matter of fact, a front emblem grill badge never goes anywhere else but the front grill......fender badges go in their perspective place and rear spoiler badges go in their place, 3 seperate badges and sizes for each their designed place on the vehicle. Their is some uniformity from the factory and method of standard they go by. You want to throw that all out the window, fine have at it......but don't try to say factory hap-hazardly throws front grill badges everywhere they want.
@@Eddie-In-Las-Vegas lol am not justifying it you wont do it thats fine, i did it since i paid for it, mopar did in the 70s, thanks for stopping by, google it next time.
@@triple_threat_lightz I don't have to Google it, I know. I see what this is all about now. You are throwing nostalgia on a modern Hemi Challenger, cause you saw some vintage Challengers from back in the day and now you are trying "cross vintage badge" ........I call it stretching the point.....but it's a free country.....cheers.
yes they do, thanks, like I said on the vid, am not sure if these are the metal or plastic ones, but these are kind of heavy so I might have the metal ones they are hard to bend, am not sure I might be wrong, theres a part number for reference, good luck :)
They look awesome,think im going to get these..
👍👍👍
I was following all your directions but accidentally put my emblem on upside down. How I get it off now? I did it on both sides actually
You have to just pull it off idk why you didn’t just pulled it off right when you did it, not sure how would you do it upside down when you have it in front of you but when you realized that you were actually able to remove it without having any trouble.
@@triple_threat_lightz I smoke too much weed I think
Lol 😂 well you going to have to pull it off and when you do the tape is more than likely going to stay on the car you got clean it off and add more double sided tape to put it back on.
@@triple_threat_lightz okay thank you
Hey bro, I recently purchased these fender emblems. Just wondering if you’d know how long they would last? I’m assuming bc they’re OEM like the Hellcat and Scat badges, they’d be on there for years. Would they last weekly car washes and rain/snow?
They were still on when I sold the car and they were on there for already years. And yes they will last weekly washes. Just have to make sure the are where you putting them on is clean so they can stick on and stay on the car.
gamecocks! great video! I'll go order mine tonight.
Do you still own the challenger and are the badges still attached..im asking cause i just bought a set but ive hesitated to put them on i was afraid they wouldn't stick good enough
No I don’t have it anymore, it’s been a few years now, I made a video about it, just measure 📐 a few times before sticking it to the car. If the surface it’s cleaned n prep right they will stay in it for a while
How does it look now
There’s after video of it tho I sold the vehicle a while back, really liked the look of it when added this, but I don’t own it anymore.
Wait, how did you actually put it on? Where's the how-to?
Well you measure where you want it and how far from the body line also it comes with adhesive already, if still don't know how to put it on, then well just have a shop or dealership do it.
Where did you buy it from?
Adhesive huh? Glad it's not like the old days of drilling into the body
Yeah, everything is coming out like that now.
Just ordered these on ebay... Costed $84
yup sounds about right...
www.amazon.com/Original-Challenger-Nameplate-Emblems-Chrysler/dp/B00X5NHK48/ref=pd_lpo_vtph_263_bs_img_1?_encoding=UTF8&psc=1&refRID=64JNG21MVA5YQCT1GE8Q
I little too much "Challenger" logo everywhere all over the car seems repetitive for my taste.
it maybe for you, tho factories do it also, just up to the owners preference. Good day.
@@triple_threat_lightz Ummmm, factory never puts a "model emblem" of the car front grill badge on the front, the left fender and right fender all at the same time.......justify it all you want but don't flat out make shit up.
As a matter of fact, a front emblem grill badge never goes anywhere else but the front grill......fender badges go in their perspective place and rear spoiler badges go in their place, 3 seperate badges and sizes for each their designed place on the vehicle. Their is some uniformity from the factory and method of standard they go by.
You want to throw that all out the window, fine have at it......but don't try to say factory hap-hazardly throws front grill badges everywhere they want.
@@Eddie-In-Las-Vegas lol am not justifying it you wont do it thats fine, i did it since i paid for it, mopar did in the 70s, thanks for stopping by, google it next time.
@@triple_threat_lightz I don't have to Google it, I know. I see what this is all about now. You are throwing nostalgia on a modern Hemi Challenger, cause you saw some vintage Challengers from back in the day and now you are trying "cross vintage badge" ........I call it stretching the point.....but it's a free country.....cheers.
@@Eddie-In-Las-Vegas its currently being done to the new ones by others, cheers mate!