DIY how to repair or fix Patio Swing Hammock
ฝัง
- เผยแพร่เมื่อ 22 มิ.ย. 2019
- diy this video is educational and shows possibilities of upgrading the worn patio swing in cost efficient way. Patio Canopy Swing Glider Hammock Cushioned Steel Frame Outdoor
Thanks for the video! I used it to re-do my swing and I love it! I did mine just a little bit different but same concept. Thanks again!
I have a swing that needs to be repaired, thanks for idea. Good video !
Neat! I just got one off the curb... and I was wondering what I'm going to do with seating... this is way cheaper..... thank you!
Thanks for the video. How about the weight?
Good job. Add a rounded wooden bar across the front end otherwise it’ll hurt the back of the knees.
Mik902 each board rounded from the back of the knee area. .
@@Deals-reviews-DIY you didnt show that part how you rounded the edges
That looks comfortable!
We're getting ready to do this, and are thinking of running the seat boards horizontally, and rounding off the outside front edge. I'm wondering how those boards feel on the backs of your legs?
Little stiff but not uncomfortable. If you sit for a long time. You can put small cushion pillow.
at 1:35 min are those boards screwed into the swing frame? and at 2:18 are the vertical boards only screwed into the horizontal boards ~ at what points did you screw the boards directly into the frame of the swing if any! Thank you!!
Yes 2.5 inch screws
No nothing screwed on the metal fram. I built into it, so its pretty solid. The whole seat is sitting on the frame and not easy to come off. Worst case if move I will zip tie it to the frame.
Thank you for posting this ! THIs is EXACTLy what I have!! what are "these"? what kind of wood? Finish to protect from elements and sun?
womens wellness
Just standard 3x2” 8 ft long board boards from menards.
I have not used polyurethane this season. Im planing on stan it.
How did you attached it to the metal swing?
How did you attach it to the metal?
How did you attached it to the metal part?
1:36 the two bars have all small boards screwed on it. Same thing for the back panels.
Deals - Reviews & DIY thank you!
@@Deals-reviews-DIY did you have to make the holes for the two bars? I am trying to understand your answer.
How did u attach the wood tho?
patti cross 2:18 two bars all small boards screwed on it. Same thing for the back panels
I am fixing to start a simular project and was wondering how you attached the wood to the metal tube frame of the swing?
Cen-Tex Fireplace Solutions
I screwed the board to bottom boards. Nothing is was screwed on to frame.
The seat won’t budge but if I want to I can remove it during winter.
@@Deals-reviews-DIY thank you
I ended up actually drilling holes through the tube frame and bolting a 2x10 on the bottom and 2x6 to the rear. Then filled the gap with 5/4 board then I used 1x6 for the bench and just shot them to the 5/4 board with a brad gun.
Huh? Most know how to measure and cut lumber. HOW DID YOU ATTACH IT TO THE FRAME? Just laid on top?
All small boards screwed onto two bars. 1:36 Whole seat is resting on top of the frame.
@@Deals-reviews-DIY thx. Then removable for winter! 👍🏽👏🏽
everyone is asking the same question. lol He says he let it rest on top of the metal frame.
Why not show the back and bottom where people can see how you attach the wood to your metal swing