Thank you very much. I’ve seen your video yesterday and made it today. I chose a bit to thick steel , 1cm, but it is strong. Tomorrow I’ll buy 0,5 cm and make some more. You are absolutely right, this clamps cost a fortune. Mine costed me around 2€ and with 0,5 steel it will cost me 1€. Had a bit problem with welding the screws but I think I need a thiner stick next time. Thank you for sharing.
Excelente! Muito bom seu trabalho muita criatividade e ferramentas ótimas para facilitar o trabalho! Que máquina de solda é essa meu amigo? Essa solda aí é excelente.!
Beats paying silly money for them! Sadly this comes too late for me(D'oh!) but then again I have had mine for years. Top job mate...(Think you're colour choice was inspired by halloween!🎃🎃🎃)👍
Nice job man, I'll try to do one of these too, since I have some flat bars here, Mine is 2'' x 3/8'' I think it will be a little too heavy... but that's ok
sopesando calidad, eficiencia, durabilidad y coste ¿creé usted que ésta prensa es más barata que de fabrica? Aunque no dejo decirle que resuelven y que uno mismo la fabrique deja satisfacción.
en términos de calidad y costos de producción, estoy muy contento con esto, no hay costosas herramientas de I + D y costosas para la producción en masa. Hacerte a ti mismo también es satisfactorio. Para mí esto cuesta menos de £ 3 :). gracias por tu comentario mi amigo
What type of welder? I think seen it said tig but I am not familiar with welding. Is this hard to learn to use? Compared to other types of welding would this type be considered easier or is that the wrong description? Home handmade occasional use. Suggestions appreciated
I seen so many people making diy clamps they make it so difficult..glad I saw this video you made it so easy ..I jus wanna ask thickness of barstock you used on these ?
Eu usei 40 milímetros x 8 milímetros flat bar ... tanto quanto as medidas foram .. eu só fiz isso para atender às minhas necessidades. você pode fazer isso tão longo ou curto quanto quiser.
![BOWKYLION - วิงวอน (ex-change) [Official MV]](http://i.ytimg.com/vi/cLdnZWDaO-w/mqdefault.jpg)
Thank you, that's the first f clamp video that doesn't need all the tools in the world
I try to use basic tools in my videos. Glad you liked it
I watched your video last night and today I made my first clamp, thank you
Glad I could help!
Thank you very much. I’ve seen your video yesterday and made it today. I chose a bit to thick steel , 1cm, but it is strong. Tomorrow I’ll buy 0,5 cm and make some more. You are absolutely right, this clamps cost a fortune. Mine costed me around 2€ and with 0,5 steel it will cost me 1€. Had a bit problem with welding the screws but I think I need a thiner stick next time. Thank you for sharing.
Thank you for your kind comment. I'm glad you made the clamp. 👍
This was a straightforward & helpful video, thank you...& thank you for the last bit 😂
You're so welcome! Thanks for watching
Love the idea for the swivel pad. 👍👍
Just simple is this.... beautifully done and dusted. You are my genius from now on... lucky to meet you here. Thank god...
Thanks for shearing, thanks for teaching !!
I'm watching all your videos starting today. it was a great video. thank you for your effort.
Good job!!👌🏽👏🏽 thanks for share
Very nice job .i hope to make one like this.
MUY BUENO!!!! FELICITACIONES, VOY HACERLAS!!!
Very impressive.
I really love it your bar clamp
It was very good but honestly the welding.
Awesome
Clear
Good to see
And many many argument more
Thank you very much!
Thank you for sharing 🙂 I’m definitely gonna make these
glad i saw this video before before buying new ones.
Veri good... Congratulations.
I love your work
Excelente trabajo, gracias por compartir tu vídeo. Saludos desde México🇲🇽
Excellent work thanks for sharing keep up the great work......
Thank you Ernesto
Sehr gut du bist ein genie.
Das ist schöw.
Danke mein Freund
Nice welding!
Thank you! Cheers!
I like diy work i just started doing thanks
Awesome! Thank you!
Yesssssss ill never ever have to buy clamps ever again
PMSL :)
Good idea
Many many thanks
Nice job! I love your video
Thanks...thatss a real honour 👍
2 great clamp ideas guess ill have to make some too thanks for the info
Go for it Wade...would love to see the finished items buddy :)
Make it look Metal
Great video, simple to follow yet very useful for diy projects.. good job man...
Parabéns pela ferramenta! Show de bola!
Simply brilliant
Cheers Ross
Excelente felicitaciones Maestro Venezuela gracias saludos cordiales
Lo felicito señor! Gracias por compartir su conocimiento. Saludos
de nada mi amiga
Excelente trabajo...!!! Me suscribi al instante que vi el video ...mi idea es poder armar un taller y crear estas herramientas ..genial ..
Gracias por tu apoyo mi amigo. Espero que tengas tu taller en funcionamiento pronto.
Thank you Bro. God bless you. 🎉🎉🎉❤❤❤😊😊😊
Fabrication is very good, thank you for sharing!
Cuáles son las medidas de sargento
Muy muy buena tu soldaduras excelente creación saludos desde Argentina
super réalisation, très bon boulot, félicitation à toi ;) very good !
Merci, je suis content que vous ayez apprécié
gv
Exelente trabajo Felicitaciones ! Mañana mismo intentare hacerlo.
Nice welds
Using clamps to make clamps so you can clamp more clamps to make more clamps.
What’s thickness of flat bars did you use for this project fantastic video
Thanks for watching. The flat bar i used was 40mm x 8mm (thats all i had in the scrap bin at the time)
Cheers
Jase
Genial parcero quedo perfecta
otimo video, parabens, otima solda.....
obrigado meu amigo, olá de wales uk.
Excelente! Muito bom seu trabalho muita criatividade e ferramentas ótimas para facilitar o trabalho! Que máquina de solda é essa meu amigo? Essa solda aí é excelente.!
obrigado pelo seu comentário meu amigo. o soldador que estou usando é um soldador mig sinérgico.
@@MakeItMetal De nada! Excelente soldador! Parabéns pelo vídeo e pelo trabalho.
Ai meu querido
A soldar e chamada MIG
Mais posso te asegurar que e a mao do cara que faz o trabalho.
Eu ja fiz o comentario.
Abraço
Very good work Jason. I might need to build one of them someday. Cheers my friend.
you're welcome Pat :)
Whoa... I want «welding apparatus» like that!
Nice job,men !! Congratulations
thanks jupi jupi
Thank you so much. This is more simpler way to make a very durable clamp.
BTW what is the size of the flat bar?
Thank you . i used 40mm x 8mm flat bar in this project
Great content bro i like it
Простая и надежная струбцина!
Это 👍
Beats paying silly money for them! Sadly this comes too late for me(D'oh!) but then again I have had mine for years. Top job mate...(Think you're colour choice was inspired by halloween!🎃🎃🎃)👍
yup money is always an issue...the colour choice was " this is all i have" but you just gave me an idea..thanks Huey :)
Хорошая работа!!!
Спасибо
Very Good and Funny End Thanks
Thanks for watching modey
Another fine build buddy.
Thank you very much Mr Fences. thanks for your support buddy :)
ЛАЙК!!! Дякую за відео. УСПІХІВ.
Ти вітаєш, мій друг
I'll do it for myself, thank you.
@@ВікторОренчак ф им, игра
0
On my list of things to make
Go for it Rodney..I just paid out £360 for a few of them..made this one for less than a fiver!
@@MakeItMetal yes sir i seen some o.k. Amazon that weren't to expensive, but can be made a lot cheaper from scrap stuff lol
Спасибо за идею! Ну почему же я сам не догадался?!?!
Very nice👍👍👍👍
Buen aporte, a migo. Haré una igual.
Nice job man, I'll try to do one of these too, since I have some flat bars here, Mine is 2'' x 3/8'' I think it will be a little too heavy... but that's ok
Go for it!
Very cool 🤘😎
Thanks Green :)
Ciao amico buon lavori
Grazie amico
very nice
Thanks
Muito bom trabalho 😊🇧🇷
Делал такую струбцину, но из полосы 4*25, гнется. Не хватает жесткости. Так что учтите ) Если не сильно зажимать, пользоваться можно.
Отличный момент .. хотя этот работал нормально. Спасибо за ваш комментарий
Muy buen trabajo. 👍👍👍👍👍 Saludos José. M. De Chile 🇨🇱🇨🇱🇨🇱🇨🇱🇨🇱
gracias mi amigo
Awesome job well done 👍 you should be a welder 🤪seriously great job!!!
Lol..yup I keep trying..one day I'll get there 😛
Exelent brother saludos desde bogota col.
Отлично! Uzbekistan.
Esplêndido. Parabéns pelo excelente trabalho. Brazil
obrigado meu amigo
sopesando calidad, eficiencia, durabilidad y coste ¿creé usted que ésta prensa es más barata que de fabrica? Aunque no dejo decirle que resuelven y que uno mismo la fabrique deja satisfacción.
en términos de calidad y costos de producción, estoy muy contento con esto, no hay costosas herramientas de I + D y costosas para la producción en masa. Hacerte a ti mismo también es satisfactorio. Para mí esto cuesta menos de £ 3 :). gracias por tu comentario mi amigo
Excelente proyecto. Será tan amable de pasar las medidas de los sargentos?? Muchas gracias y saludos desde Argentina
Brasília - Brasil. Excelente , ficou muito bacana e bem didático valeu
Obrigado meu amigo
Might have to take this one from you to use at a later date
go for it. thanks for your support :)
Nice *Orange* color…
What type of welder? I think seen it said tig but I am not familiar with welding. Is this hard to learn to use? Compared to other types of welding would this type be considered easier or is that the wrong description? Home handmade occasional use. Suggestions appreciated
Mig welding process used in this build...it's easy to learn and can be quite cheap for the home set up 👍
@@MakeItMetal thank you for your reply. I will invest as soon as possible.
SUBSCRIBED 👍
Awesome ! When you see the price of those clamps in store... Will build one of JA patented soon :p
Thanks Shoyun...i just bought a load too! typical eh lol
نعم
Great!👍
thank you
Excelente trabajo
Muito bom 😉🤝
Excelente. Puedo preguntar que tipo de máquina de soldar usas.
Clamps in my area are pretty expensive. I can make a few of these with my powerarc welder and a bit of free elbow grease.
go for it Sebastian..they cost a fortune here too
My area too... they're very expressive..
Me too, they cost as much as a scaffolding leveling jacks if not more expensive smh
Good ones are hard to find, here - and then they are expensive!
BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO BRAVO
Спасибо за идею.
Genial muy profesional 👍
I never even thought about making my own tools with my powertig welder.
sometimes it's the only way to get the tools you need at an affordable price :)
Also using tools you've made yourself just feels better too.
Que fácil lo hace!
Maravilha meu migo!
Muito obrigado
excellent
I seen so many people making diy clamps they make it so difficult..glad I saw this video you made it so easy ..I jus wanna ask thickness of barstock you used on these ?
Hi Mark. the bar stock i used was 40 x 8 mm. thanks for the comment :)
You need a clamp to make a clamp.. 😉😁
Formidable
Super !!!!!!!!!!!!!!
Thanks buddy
Excelente trabajo amigo te felicito !!! solo quisiera saber las medidas de la planchuela que usaste para la fabricación. Saludos
Eu usei 40 milímetros x 8 milímetros flat bar ... tanto quanto as medidas foram .. eu só fiz isso para atender às minhas necessidades. você pode fazer isso tão longo ou curto quanto quiser.
Muito bom parabéns. A minha dúvida foi no parafuso de aperto como fazer para que ele fique fixo e não gire.
@@getuliocomiotto1230 -> o parafuso tem que girar, se não girar, não aperta nem desaperta
@@alphasigmasezon8597 Estava me referindo a Porquinha que fica na ponta do parafuso e faz o contato com a peça a ser presa. Entendeu?
@@getuliocomiotto1230 => agora entendi
Для себя самый раз, молодец.
Большое спасибо, мой друг
Bravo👍👍👏👏👏👏👏😉
великолепно молодец
благодарю вас
สุดยอดครับผม
Veri good !!!!
Abraços !!!
Thank you Rogerio
Excelente,
muito obrigado.
Грамотно 👍👍👍
Magnífico!!!