04 How to Upload and setup Cisco IOU L2 and L3 Switch in GNS3 Client

[@benjaminboateng3276]

Many thanks Md Anwar Hossan. After a long search to get GNS3 working, this video have helped me in getting GNS3 up and running with both L2 and L3 IOU working perfectly.

[@tatendamasawi8913]

you are a life saver been on youtube for the past 13 hours trying to figure this out. thank you.

[@GamerVega]

Bro..you saved my course... i have searched whole internet and then yours only worked. thank you!!

[@varusaimohamedshahulhameed8953]

i didn’t see any kind of video like this, hats off to you brother, its very nice

[@MdAnwarHossain]

Thank you so much 😀

[@akaninyenearnoldsunday3903]

This is the solution to my problems; thanks a lot.

[@damodarswami1533]

Thanks for this quick and exact guidance

[@naimahassan2715]

WOW...Thanks a lot, bro. At last, fixed my problem with your amazing video.

[@pabasararavishan6337]

.py file is not in the folder that I downloaded from your link

[@reginaldopires4982]

vc é o cara man, obrigado!!

[@loganbala1029]

Your video saved me sir. Thank you very much.

[@fairplay8347]

Error
No such file or directory
Or
32bit binary not installed
Why

[@alexander1885x]

Thank you! You saved me

[@jenkinsalerts]

Awesome you save me a lot of time. Thanks a lot!!

[@mUsTaFaMaHeR-zo5mo]

You are amazing

[@loganbala1450]

Thank you very much sir. Your video was really helpful.

[@mustelex]

thank you bro ....its work i am very happy

[@Kukooooo1]

Superb bro...

[@ukaipk]

All I can say is thank you!!!

[@faridaliev3057]

thank you broo..it was very useful..

[@JT-qt5fl]

how to do this with web client

[@nikoladunjic8907]

thank you man great video

[@danyjacob9557]

unable to see /opt in root

[@wneitonluizgomes1620]

very nice your tutorial! thanks

[@riezzo1350]

wow well done bro

[@mlungisivilakazi6504]

Great video!

[@vinayyadav-cm3hw]

Awesome 👍

[@MdAnwarHossain]

Thank you! Cheers!

[@thomassheyin1537]

Thank you for your videos. please can i use gns3 2.2.25 version with this same steps?

[@ciscoking2276]

que pro, perfect and thank you

[@syedmohammadshahbaz3304]

superb bro

[@roshansha7937]

damn bro it works

[@lucylu7161]

Thanks for your training videos. my GNS3 show below. " Could not start IOU: [Errno 2] No such file or directory: '/opt/gns3/images/IOU/i86bi-linux-l3-adventerprisek9-15.4.1T.bin': 32-bit binary support is probably not installed" What's that meaning ? Could you please help

[@padmaraj100]

I have downloaded the Cisco IOS but its opening in GNS file extension . While uploading from GNS3 .bin file is not showing. Pls Help

[@MdAnwarHossain]

did you run python script ?

[@padmaraj100]

@@MdAnwarHossain Not Yet

[@MdAnwarHossain]

Step 01: upload Cisco l2 and l3 switch image to gns3 client (Click edit> IOS on UNIX> IOU> Click New> Select "Run the IOU device on the GNS3" then click next> Name it and select and click browse and select the image file.
Step 02: Open winscp
Input hostname gns3 vm IP
Port: 22
Username: gns3
Password: gns3
Then click login
After login you need to upload CiscoIOUKeygn3f.py file to /opt/gns3/images/IOU
Step 03: Go to gns3 vm and select Shell
Run following command
> cd /opt/gns3/images/IOU/
> sudo python3 CiscoIOUKeygen3f.py
After run python script go back to winscp
And click refresh in gns3 vm end
Then you will see iourc
Drug this iourc file and drop to your local drive.
After all again go back to gns3 client Click edit > Preference> IOS on UNIX > Click browse and open the iourc.txt file
Follow this steps carefully also follow the video 1st to last.

[@MdAnwarHossain]

After all if you fail let me know I will help you remotely run anydesk and give me anydesk I'd to my email. [e-mail]

[@ARsagorcse]

অসংখ্য ধন্যবাদ। অনেক দিন পর ফেলাম এমন একটা টিউটোরিয়াল ।
ডাউনলোড করা সিসকো আইওস ফাইল দেখি GNS3A extension . bin ফাইল এর জন্য আপলোড করতে পারছি না। কি করবো এখন ?

[@MdAnwarHossain]

Yes this is the correct extension

[@MdAnwarHossain]

Step 01: upload Cisco l2 and l3 switch image to gns3 client (Click edit> IOS on UNIX> IOU> Click New> Select "Run the IOU device on the GNS3" then click next> Name it and select and click browse and select the image file.
Step 02: Open winscp
Input hostname gns3 vm IP
Port: 22
Username: gns3
Password: gns3
Then click login
After login you need to upload CiscoIOUKeygn3f.py file to /opt/gns3/images/IOU
Step 03: Go to gns3 vm and select Shell
Run following command
> cd /opt/gns3/images/IOU/
> sudo python3 CiscoIOUKeygen3f.py
After run python script go back to winscp
And click refresh in gns3 vm end
Then you will see iourc
Drug this iourc file and drop to your local drive.
After all again go back to gns3 client Click edit > Preference> IOS on UNIX > Click browse and open the iourc.txt file
Follow this steps carefully also follow the video 1st to last.

[@Eyemama]

😭😭😭thank you sir......

[@ccppqq1984]

Hello , thank your share，i have a question can you help me? the L3 image no switch port command . it is correct image?

[@mirho3ein]

same issue! seems its a ROUTER IMAGE and not a L3 switch os !

[@redaelmokhtari6934]

Thanks a lot

[@salemalkliebat3442]

thanks

[@allana4034]

thanks! share the image please 😉

[@MdAnwarHossain]

In video description it is there

[@MdAnwarHossain]

drive.google.com/drive/mobile/folders/1HYyaJ0kXB3XuMLoRFMyl20mo79omXv8n?usp=drive_open

[@aboubacardiallo898]

Thanks

[@MdAnwarHossain]

My pleasure

[@lucylu7161]

Found the answer : th-cam.com/video/HwDcTzFPm1k/w-d-xo.html

[@somphousasengbong2510]

thank so much.....