How To Make Water Wheel House With Wind Turbine By Using Popsicle Sticks! Easy Techniques

To create space for windows and doors, place sticks side by side, leaving gaps or using half-sticks. Sticks are joined by gluing support sticks across the ends of two opposing walls (top and bottom pictured); these provide a surface for glueing to neighboring walls. On the remaining walls and where the windows will be, glue the center supports.
Glue whole and half sticks together; for the panes, use toothpicks.
Layout half-sticks; affix a support stick at an angle and a doorknob with beads. To create a doorstep, glue together stacked half-sticks.
Stick two cut-off sticks together at an angle with glue (add clay inside; flowers are beads and paper leaves on cut-off toothpicks). Attach windows and window boxes using glue. Glue ribbon to the door and the door frame for the hinge. attach walls with glue. #popsiclestickshouse #minihouse
Lay out two rows of sticks, one as broad as the house, for the sides, and glue the supports in the middle. Glue two A-frames together. Two wide craft sticks should be cut into the chimney form as shown and glued together at the sides. Apply glue to the edge of one roof side and the flat side of one A-frame. Repeat for the other roof side. Second A-frame should be adhered. A chimney should be adhered. Attach the house's roof.

[@user-nm8hw4hp3t]

I love this one 🎉

[@tonisanders6922]

What tool are you using to cut the sticks

[@user-ky6qk2pw6x]

Please make mini size ice stick

[@veysel0001]

Hi.

[@user-ky6qk2pw6x]

Kindly you make this 10 mm stick

[@seeanddo]

Certainly! If you need to make a 10 mm stick using popsicle sticks, here's a simple approach:
1. **Materials:**
- Popsicle sticks
- Ruler
- Pencil
- Craft knife or scissors (for adult use)
2. **Instructions:**
a. Measure 10 mm on one of the popsicle sticks using a ruler and mark it with a pencil.
b. Carefully cut the popsicle stick at the marked point using a craft knife or scissors. If you're not allowed to cut, seek adult assistance.
c. Sand the cut edge gently to make it smooth and remove any splinters.
Now, you should have a popsicle stick that is approximately 10 mm in length. Remember to prioritize safety, and if cutting is not an option, consider alternative methods or seek help from an adult. If you have more details about your project or specific constraints, feel free to provide them for more tailored advice.

[@veysel0001]

I have a project homework next week. I'm having trouble making a tree. How can I do it?

[@user-ky6qk2pw6x]

Correct size video send me please