SACHS Stay Mo. Old German 2 stroke engine.
ฝัง
- เผยแพร่เมื่อ 18 ก.ย. 2024
- So the old lightweight 2 stroke I pulled out from under the bench is finally running after many decades of just sitting there unloved.
so relax and enjoy this "Will it start" video. ow when i try to start it make sure your volume is low if you are wearing headphones 🎧 😉.
![[FULL EP.16] เซียนพาลุย "เผือก-ฟรอยด์" กรี๊ดลั่น จนปูหนี | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/FsqUvwS3b-Y/mqdefault.jpg)
I love your videos very good
on hard or stubborn to get off petrol lines i use a safe way of using my wifes old hairdryer on hot setting works every time.sometimes works on stubborn screws heat em up.but dont pinch mrs mancaves hairdryer she uses.
I bought one last year from stalham . It was part of a really nice air compressor set for 50 quid. Just sat outside the guys house with some mowers. No spark and I sold it as it was taking up space . Guy txt 2 days later to say it was running great and in his van for use as mobile air unit. Another regrettable sale really but u can't keep them all. Nice video as always
Sounds sweet ! German craftsmanship some of the best in the world .
It's a Sachs Stamo 30. Sachs (pronounced Saks) are renowned for two strokes most commonly alongside Dolmar for chainsaws and other garden power tools.
was going to say the same as I used to work on Sachs Dolmar chainsaws and disc cutters
Needs an expansion exhaust. Those Stamos are tuned quite hot. With a proper chamber they sound like a dirt bike. Especially the bigger Stamos (there is a 350cc variant).
I use household fuse wire to clear the jets
What a ripper little engine, all alloy by the looks 👍
Carb looks a similar design to a 49cc Puch maxi moped.
Yes, think it's a Bing carb.
Nice work once again Adam. Really enjoyed this one
Fantastic, Sounds like a doberman after a curry!
you should say "zaks"
I really like such small engines.
Nice entertaining vid, like usual. Thanks for uploading, sir.
Hey, just came across your channel after hearing about you on one of MyMateVince’s videos.
Looks like you’re just up the road from me, I’m in Swaffham.
Keep up the good work, I love watching stuff like this 👍
Love to see that tank polished up and yes a pulley would be good , or research what they were used for ?
really cool little engine adam
Reckon a can of brake clean with a straw may have preserved that brass filter and cleared the blockage. Had a lot of two strokes in my life and if you want your engines to last then I'd highly suggest 32:1 using a good quality two stroke oil. Cheers
Sachs engines were used on snowmobiles in 60s 70s were a strong engine
awesome sounding without a muffkin
It would make a nice boat motor - run it on Kerosene
I will be there with one of your favourite engines good ole lister dk but give me slack its my first stationary engine wanted something simple
Awesome vid had no doubt that engine would run good ole sachs would love to hear it with a ptoper exhaust cant beat sound of 2stroke or small haha
Take a picture of the label and ask Google to translate. Nice job
again.
Just buy some fuel line if it's bad. Tighten that sentiment bowl up before you forget.
Clean the whole carb. in the ultra sonic. And if the Carb. has needles, turn them in FIRST so you know how many turns to screw it in after cleaning!
There's NO NEED to use that drill/brush on the bowel if your going to use the ultra sonic. If it has a main jet and an emulsion tube, remove them as well,
otherwise, why clean the carb.!? You'll still have troubles with it running.
---
Wishing detergent WILL NOT do the job! Get some Simply Green. At 25:27 NO! DON'T PUT OIL INSIDE A CARB.!! It should move freely if the carb. cleaned properly.
If u Google bead threaders I found some of them were fine enough for tiny jets.
Not only does it run,it also walks.
Das war ein poppen und bangen motoren mit blauen auspuftgas!
Now all you need is a strimmer to put it on - or eine kleine chainsaw!
Kraftstoff = fuel
Einstellen = starting
Abstellen = stopping
Zundekurz = sparkplug
At least, for all intents and purposes.
Just for fun; Sauerstoff = fresh air. Auspuftgas = exhaust gas. Tankstellung = refuelling.
Frisch und sauber = fresh and clean.
I'm sure I'll have got something wrong, but my German is well and truly rusty!!
Friend from the States here. Aluminum 😂
Cracking little engine. Selling it Adam?
your welcome
Doesn't The "B" on the carb float stand for Bing carburettors who were a well known German carb manufacturer?
LOL yep Aluminum or Alimenium
Lovely little piece of kit wonder how old it is perhaps that vin number is similar to briggs engines and it has the year in it?
The German military used have lots of Sachs two strokes running charging sets, from the look of the drive end on that engine it's likely that is what that one originally had unless it was a pump. There is a you tuber goes by the name of "the post apocalyptic inventor" that recently got a whole bunch of Sachs gen sets and renovated them. heres a link.th-cam.com/video/oaP-DABtThE/w-d-xo.htmlsi=mxdklXVe2AG4aTuY
What a bu
DUDE!! REMOVE THE TANK AND CLEAN IT BEFORE YOU TRY TO START THAT ENGINE!! OTHERWISE YOU'LL BE CLEANING THAT CARB. AGAIN!!
YOU'RE BENDING THE CRAP OUT OF THAT TANK MOUNT!! You will have to fill that tank with Vap-O-Rust and lots of nuts & bolts and shake the CRAP
out of it! You will also need to TRY and use the ultra sonic to clean that fitting, or replace it. It's running rough because that Carb. needs cleaning! SOME MORE!
Or it needs rings. I'd check the oil level. If your going to put it aside, shut the fuel off and run it until the Carb. is out of fuel, otherwise it will just varnish up!!
---
You need to watch: *James Condon* on how to clean Tanks and Carb's. CORRECTLY!
you could attach a tiny little pump that would be cute
The name is pronounced 'Sacks' mate.
What about go cart, or maybe a band saw.. Or water pump.
as much as i love the small british engines, sachs were superior in my opinion
This it a two stroke oter one its a 4 strok not the same sound
tiny enough to be an airplane engine
Repeat after me... Fish-tell-oont-sax... OK, you're from Norfolk and can't even pronounce English. I'll have you know that I was drummed out of Somerset for saying you are instead of you'm... 👍