Thanks for showing telling,cause I ordered a Z3 be here in about the first of 2023 hope it’s a good one. Thanks again for showing telling,have a good one see ya next time see ya bye.
Great info on the 23’s👍usually I upgrade every 2 yrs…but not this yr due to the high prices. Great video on the new ones, and look forward to your 1000 hr review on the 2019s . I have 500, and going into my 3rd yr on my (2) 52”/61” Z3X’s. Love these mowers, and not going to anything else. Love your leaf setup, and would love to go that route. My Grasshopper 721 D with the 25 cubic ft hopper has worked great over the past 11 yrs. I only use it for Leaf Removal. Good luck this yr on the new equipment👍always nice to have some freshies✌️
Thanks for another super informative video. I always appreciate how thorough you are. I have actually broken the front washer on my 2018. I like the bolt on idea for outside scalp wheel. I've bent that area on one of mine a few times and had to take it to a welding shop to fix. The reinforcement on the deck looks like a great idea too. I agree with you I'm happy with the cut but anything better will be an added bonus. Hoping that you have a great season.
That tunnel across the front is to help move air out from under the deck, they increased the size so it must be moving more cfm's. That raises the grass up so you get more even cut. About 1/2 the air comes off the end of the blade as thru the blade tunnel. Look at your cars fan, typically a good third of the blade is exposed outside the shroud. Nice looking machines you have. I drove mine with the stander seat, brain was confused- azz goes one way, brain expected it to go the other. Lol. I only put it on the 61, small intermediate yards I have to crouch down to get under trees and its in the way of the hitch.
I believe that red upholstery detail is called piping. Congrats on the new mowers. Was the pricing not up drastically from last year, or you just didn't care? 😂 Nothing like a shiny new mower. Not sure how I like that electronic throttle control 🤔 Yep, looks like the front baffles of both mowers are a little higher that the rear baffles.....
The price was locked in from last year which saved me almost $2000 total, but it was still $3000 more than the 2 2019 models. I don't plan on buying any more mowers until these are completely wore out and not repairable. They are really nice, but they will never be this clean and shiny again. I'm looking forward to seeing how they cut and how well the throttle control works out for the long run.
I was just at my dealer today checking out this new Ferris mower! Comparing it to my 2020 Z3X my dealer told me they fixed all the issues with the older Z3X and made a perfect Z3X. The 2 biggest changes mentioned are the 60" deck which should improve cut quality and get any stragglers since the blades are now overlapping. The second change is the ETC engine or Electric Throttle Control engine. It keeps the RPMs up so the engine shouldn't bog down. This will cut down on your run time by working faster on this engine than the older engines. The muffler they got rid of the CO2 detector and put a heat blocker behind the front engine protector bar. I can't wait to demo one! How are you liking it so far? Great video, and you have a great season!
Awesome review and preview videos. Such a strong endorsement from you buying exact same machines. Maybe I missed it on the new ones, but which HP are the new ones? Have a great season!
Nice showing. They look awesome. Is there an option to raise the blades? Having the blades below the deck could kick leaves out the front and wouldn't mulch as well for lack of sealed suction that a lower deck/higher blade height provides.. Seems to work best blade level or slightly above.
Have you got to use the 2023 models yet? If so can you tell any difference in the cut ? better or cant tell any differnce, Im picking up my new 2023 Z3X this saturday,Thanks
Hey Bud, How do you like rhe 60" deck compared to the 61" after using it all summer? I have a 2019 61" Z3, going to add another before the year end but can get either deck I want as I have both deck options available by me yet. How do you like the electronic throttle? Pricing has definitely changed but not horrible. I paid 8600 in 2019, right around 11k now.
I really like the 60" deck and the electronic throttle. I definitely think the 60" has superior cut quality and the blades are the same as the 61" so I didn't have to purchase extra blades.
Do you have a video on leveling the deck on these? Mine is off by 1” at the moment. A local dealer said that it’s from the bracket being worn out but I don’t know how an 1/8” can throw it off by 1”🤷♂️ And where or how did you get a bagging system?
Hello - just wondering have you tried to put tweels on your new Ferris ZX3 52 inch deck machine ? And do tweels fit are they different size tweels compared with your older 52 inch machine? did they stick out too far from the deck, etc. I wanna purchase a new 2024 ZX3 52 inch deck model but the OEM tires are so narrow. That’s the only thing I don’t like. Thank you
Thx for the update - when time permits could you do a follow up video on how the new mowers are cutting and also with the tweels on the new 52” ZX3? - im assuming your referring to the 24x12N12 tweels correct? The same ones that you put on your older machine - Also I’ve had good luck with the front tweels on my Ferris SRS Z2 - Thx
@@HandyGuy2016 Hello - I was wondering if you even purchased a 52" ZX3 so that makes more sense now - I look forward to the Video on how the new mowers are cutting, doing, Etc. Be safe out there - Blessings :+)
I got to demo a 52 Z3X the other day. Very impressive and really close to ordering one. 1 issue for me was the platform seemed pretty angled towards the pad and the ride was pretty stiff. I now know there's ways to adjust the platform for a softer ride if you're a lighter operator like me. Have you or could you verify those settings and how much of a difference they made?
Mine are set in the middle setting which is comfortable for me at 180#. I have adjusted it to test the different settings and it is a noticeable difference.
Lol, I'm aware, I have a very calm laid back personality. I appreciate people with good energy, that's just not me. I do appreciate your critique though.
![เจ้าผู้เดียว - ดิด คิตตี้ [OFFICIAL MV]](http://i.ytimg.com/vi/q0NLCYKBOTo/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 73 วันนี้!! คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
Thanks for showing under the mower. That new design is gonna cut down on the clumping for sure.
The red vinyl stripe where you sit or stand on that mower is called piping
Thanks for showing telling,cause I ordered a Z3 be here in about the first of 2023 hope it’s a good one. Thanks again for showing telling,have a good one see ya next time see ya bye.
Excellent review especially on differences between the decks, Thank You
Thank you
Great video. Looking forward to your review of the cut quality comparison.
Beautiful mower I will never buy another brand mower, I just came from the dealer looking to get a 36in vanguard engine, you always inspire me
Thank you
Great info on the 23’s👍usually I upgrade every 2 yrs…but not this yr due to the high prices. Great video on the new ones, and look forward to your 1000 hr review on the 2019s . I have 500, and going into my 3rd yr on my (2) 52”/61” Z3X’s. Love these mowers, and not going to anything else. Love your leaf setup, and would love to go that route. My Grasshopper 721 D with the 25 cubic ft hopper has worked great over the past 11 yrs. I only use it for Leaf Removal. Good luck this yr on the new equipment👍always nice to have some freshies✌️
Thanks for another super informative video. I always appreciate how thorough you are. I have actually broken the front washer on my 2018. I like the bolt on idea for outside scalp wheel. I've bent that area on one of mine a few times and had to take it to a welding shop to fix. The reinforcement on the deck looks like a great idea too. I agree with you I'm happy with the cut but anything better will be an added bonus. Hoping that you have a great season.
Thank you
Beautiful mowers! My next stander will be a Ferris z3x! I’m liking them more every time I see them!
They are awesome, you won't be disappointed.
I love my bobcat zs4000 throttle control. It's a turn dial just like the skid steers
That's cool
That is some collection brother I like that
That tunnel across the front is to help move air out from under the deck, they increased the size so it must be moving more cfm's. That raises the grass up so you get more even cut. About 1/2 the air comes off the end of the blade as thru the blade tunnel. Look at your cars fan, typically a good third of the blade is exposed outside the shroud. Nice looking machines you have.
I drove mine with the stander seat, brain was confused- azz goes one way, brain expected it to go the other. Lol. I only put it on the 61, small intermediate yards I have to crouch down to get under trees and its in the way of the hitch.
Isn’t to allow the grass to stand up to be cut?
I believe that red upholstery detail is called piping. Congrats on the new mowers. Was the pricing not up drastically from last year, or you just didn't care? 😂 Nothing like a shiny new mower. Not sure how I like that electronic throttle control 🤔 Yep, looks like the front baffles of both mowers are a little higher that the rear baffles.....
The price was locked in from last year which saved me almost $2000 total, but it was still $3000 more than the 2 2019 models. I don't plan on buying any more mowers until these are completely wore out and not repairable. They are really nice, but they will never be this clean and shiny again. I'm looking forward to seeing how they cut and how well the throttle control works out for the long run.
Great video we just bought two new scag vride 2
Scag mowers are another top pick of mine. I had a hard time deciding between Scag and Ferris.
How was the price? I know all commercial mowers cost about the same now.
I was just at my dealer today checking out this new Ferris mower! Comparing it to my 2020 Z3X my dealer told me they fixed all the issues with the older Z3X and made a perfect Z3X. The 2 biggest changes mentioned are the 60" deck which should improve cut quality and get any stragglers since the blades are now overlapping. The second change is the ETC engine or Electric Throttle Control engine. It keeps the RPMs up so the engine shouldn't bog down. This will cut down on your run time by working faster on this engine than the older engines. The muffler they got rid of the CO2 detector and put a heat blocker behind the front engine protector bar. I can't wait to demo one! How are you liking it so far? Great video, and you have a great season!
Awesome, good season so far and the 2023 Z3X's are doing great! Definitely can see the improvement in the deck design.
Will the 72s have the new deck
Good question, I have not seen a new 72" yet so I don't know. Or a 52" for that matter.
@@HandyGuy2016 ok I have one coming in on Wednesday in a 72 I’m so excited
Awesome review and preview videos. Such a strong endorsement from you buying exact same machines. Maybe I missed it on the new ones, but which HP are the new ones? Have a great season!
Thank you. They are 37 hp
Nice! Congrats on the new beasts! They’re really pretty!If you don’t mind me asking was the price comparable to the 2019’s?
The price has gone up $2500 each. I got a better deal since I ordered them last year.
Awesome stuff man! 🤔 I'd probably check to see if the height adjustments all match up with your older mowers 🤷
Definitely, I'm going to go through them with a fine tooth comb before I put them in service.
Have you had a chance to compare the cut quality yet?
It's definitely an improvement in cut quality
@@HandyGuy2016 awesome 😎👍
Would like to see a side by side cut comparison video!
I will try to arrange that.
Nice showing. They look awesome. Is there an option to raise the blades? Having the blades below the deck could kick leaves out the front and wouldn't mulch as well for lack of sealed suction that a lower deck/higher blade height provides.. Seems to work best blade level or slightly above.
I'm not sure, I don't think there are spacers though.
I thought they keep the blade lower to cut longer/stem type grasses better.
I'm not sure, but they cut nice.
Have you got to use the 2023 models yet? If so can you tell any difference in the cut ? better or cant tell any differnce, Im picking up my new 2023 Z3X this saturday,Thanks
Yes, I have been using them as my main mowers this season and so far I think they cut better. I have not noticed any stragglers.
Nice setup looks good.
Have you ever thought about getting a Z3X 72?
I got the 52 and the 72 and I love them both don’t have the 60 though.
Thank you. I thought seriously about getting a 72" a couple years ago but I got rid of my big properties instead.
Would love to know your thoughts on the new deck after a year
I like it, it's an improvement in my opinion.
baffle helps air flow and grass getting out of the deck
looks closer to 7 iron deck design like it better for stragglers for sure
Hey Bud,
How do you like rhe 60" deck compared to the 61" after using it all summer? I have a 2019 61" Z3, going to add another before the year end but can get either deck I want as I have both deck options available by me yet. How do you like the electronic throttle? Pricing has definitely changed but not horrible. I paid 8600 in 2019, right around 11k now.
I really like the 60" deck and the electronic throttle. I definitely think the 60" has superior cut quality and the blades are the same as the 61" so I didn't have to purchase extra blades.
your 19 deck is clean did you paint it? let us know on cut quality differences?
Original paint on the 19. The cut quality on the 2023 60" is fantastic! Only the first week of the season, but it does seem to be an improvement.
Do you have a video on leveling the deck on these? Mine is off by 1” at the moment. A local dealer said that it’s from the bracket being worn out but I don’t know how an 1/8” can throw it off by 1”🤷♂️ And where or how did you get a bagging system?
By the way, you are amazing for the brand and extremely mechanically knowledgeable!
I don't have a video on deck leveling but follow the operation manual to the T. Make sure you check the tire pressure and measure to the blade tips.
Not 2023 I’ll get it about 2024 , I was thinking wrong on the year. see ya next time see ya bye
Did you go with the 27 or 37 horsepower on the new 2023 52 inch deck? Thanks.
Both of them are 37 HP with the 60" deck. The 52" I have is a 2019 with a 33 HP. I definitely recommend the 33 and 37.
Hello - just wondering have you tried to put tweels on your new Ferris ZX3 52 inch deck machine ? And do tweels fit are they different size tweels compared with your older 52 inch machine? did they stick out too far from the deck, etc. I wanna purchase a new 2024 ZX3 52 inch deck model but the OEM tires are so narrow. That’s the only thing I don’t like. Thank you
The tweels that work on the 61" and 60" also work great on the 52" turned inside out.
Thx for the update - when time permits could you do a follow up video on how the new mowers are cutting and also with the tweels on the new 52” ZX3? - im assuming your referring to the 24x12N12 tweels correct? The same ones that you put on your older machine - Also I’ve had good luck with the front tweels on my Ferris SRS Z2 - Thx
@@larrya2344 Correct but both of my new mowers are 60" the tweels worked great on my 2019 52".
@@HandyGuy2016 Hello - I was wondering if you even purchased a 52" ZX3 so that makes more sense now - I look forward to the Video on how the new mowers are cutting, doing, Etc. Be safe out there - Blessings :+)
@larrya2344 Thank you and so far they cut better and are doing great.
I just bought a 3300ISX 72”. I can tell a big difference in the updated decks. I have a 61”.
Do you foresee Ferris putting the 40hp on the Z3X?
Possibly
I haven't seen any chatter on the 40HP release. Hoping it comes soon!
@@frangeech Same here. Wright ZK and VRide both offer them. You would think it would be an offering.
@@wadebearden2009 Maybe they will announce/release this coming October at GIE? Wright didn't wait, so what's up Ferris?
@@frangeech very well could be a cost savings.
I got to demo a 52 Z3X the other day. Very impressive and really close to ordering one. 1 issue for me was the platform seemed pretty angled towards the pad and the ride was pretty stiff. I now know there's ways to adjust the platform for a softer ride if you're a lighter operator like me. Have you or could you verify those settings and how much of a difference they made?
Mine are set in the middle setting which is comfortable for me at 180#. I have adjusted it to test the different settings and it is a noticeable difference.
@HandyGuy2016 I'm 170# and I'm pretty sure the demo was set in the stiffest position. Thanks for the info and quick reply! New sub here.👍
Brother. I like your content & you do good reviews. Can I critique just a bit? You gotta speed it up. You are almost asleep.
Lol, I'm aware, I have a very calm laid back personality. I appreciate people with good energy, that's just not me. I do appreciate your critique though.
You can adjust the playback speed . That's how I watch TH-cam
speed the video up lol......
Are both new ones 60” units?
Yes they are brother.
Yea? Good luck with that lol
I'm selling my isx2200 61 120 hours