GMC Tail Light Problems /Repair not working 2015 and up "FIXED WITH SOLDERING BREAK"

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 มิ.ย. 2018
  • This Video Shows the Problems that happen with the new model of 2015 and up GMC Yukons. The entire light works but the brake light did not.

ความคิดเห็น • 37

  • @lenrobledo67
    @lenrobledo67 4 ปีที่แล้ว +1

    Good work. now I know what it look like inside. thanks

  • @MarcellHobbs
    @MarcellHobbs 6 ปีที่แล้ว +2

    I have the same problem. Looking for help videos. Thanks for posting. These suckers cost $800 to replace!

    • @samsquires2877
      @samsquires2877 5 ปีที่แล้ว +1

      Marcell Hobbs yeah garbage designed to break.

  • @jmm866
    @jmm866 5 ปีที่แล้ว +1

    I have same problem with my 2015 Yukon. Right side went out and I tapped it, now it stays on. Wish I didn’t get it to work since it’s still under warranty. Dealer says they need to see that it’s not working. Just today the left is out, so I’m hoping to get it down there and at least get the left fixed. Praying the right goes out before warranty is up. Problem is they’ll probably replace it with new ones that will have the same problem eventually.

  • @GoblinsWorkshop
    @GoblinsWorkshop 5 ปีที่แล้ว

    Thank you!

  • @Laserblade
    @Laserblade 5 ปีที่แล้ว +2

    The Guru page shows some of the people soldering jumpers across the breaks, which actually short the circuit. The repair is accomplished by soldering the skinny bridges you can see in this video.
    The pictures there do show you where to cut small openings in the plastic through the back, but don't jump across the clearance between the two contact traces. I just sealed the hole I cut with hot melt glue to keep moisture out. My job only had one of them broken, but others have had both broken.
    It took me about an hour to fix. $800 an hour is pretty good wages...

    • @terrancegrady699
      @terrancegrady699 2 ปีที่แล้ว

      I dont mean to be off topic but does someone know of a way to get back into an instagram account?
      I was stupid forgot my login password. I appreciate any help you can offer me.

    • @dakarikellen6709
      @dakarikellen6709 2 ปีที่แล้ว

      @Terrance Grady Instablaster ;)

    • @terrancegrady699
      @terrancegrady699 2 ปีที่แล้ว

      @Dakari Kellen I really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff now.
      Seems to take quite some time so I will get back to you later with my results.

    • @terrancegrady699
      @terrancegrady699 2 ปีที่แล้ว

      @Dakari Kellen it worked and I finally got access to my account again. I am so happy!
      Thanks so much, you saved my account :D

    • @dakarikellen6709
      @dakarikellen6709 2 ปีที่แล้ว

      @Terrance Grady Happy to help xD

  • @abrahamogbatsiyon6591
    @abrahamogbatsiyon6591 3 ปีที่แล้ว +1

    can the program be brake light fusi. what do you think. before I go through this process.

  • @SuperDbrown23
    @SuperDbrown23 5 ปีที่แล้ว +2

    Gerardo Gallardo Jr how did you remove the lens did you heat it in the oven or did you use a heat gun

    • @Fambamg
      @Fambamg  5 ปีที่แล้ว

      SuperDbrown23
      Hey man, this is a video without taking anything apart
      th-cam.com/video/2RzRclHGj9o/w-d-xo.html
      Super easy. I fixed my second light like this.
      I used a grinder and cut around the index edges. Not easy or clean.

  • @crwatson07
    @crwatson07 4 ปีที่แล้ว +5

    Can you please tell me how to take the light part off before repairing the light? (Not taking light from Yukon).

  • @rosarioladuca3624
    @rosarioladuca3624 2 ปีที่แล้ว

    How did you separate the lense from the back

  • @moejrbig
    @moejrbig 4 ปีที่แล้ว +1

    I took all the screws out of the bottom. I tried snapping the lens off with a screwdriver. Bad move as the clear lens cracked in two. If I ever did it again I would use a dremmel tool with a cutting wheel. I did find that small piece of silver aluminum plate cracked. I threw the complete piece out and bought a new one from JC Whitney for $386.00. GM should make it easier to remove the clear lens so the light can be fixed.

    • @xTheGamerHeart
      @xTheGamerHeart 4 ปีที่แล้ว

      The screws is for the inner parts not the clear plastic cover. also you can easily open it up if you heat it properly.

  • @noahtramposh3350
    @noahtramposh3350 3 ปีที่แล้ว +2

    you can just hot knife through the two parts where it breaks, instead of taking the entire light apart

    • @jonathans1472
      @jonathans1472 3 ปีที่แล้ว

      Type. There are other videos out there where they just cut two squares from the back to access the breaks. Search form them. This is not how you want to do it.

  • @omermalik7177
    @omermalik7177 6 ปีที่แล้ว +2

    How to open rear lights gmc 2016

    • @omermalik7177
      @omermalik7177 6 ปีที่แล้ว +1

      Explain how to open the lights

  • @ikermax12
    @ikermax12 6 ปีที่แล้ว +2

    Were you able to fix it?

    • @Fambamg
      @Fambamg  6 ปีที่แล้ว +2

      Yes it worked soldering that crack completed the circut.

    • @JJS_NINERS
      @JJS_NINERS 6 ปีที่แล้ว +1

      Is there a better way to disassemble the taillight? And cool I’m glad it’s just a solder job!

    • @Fambamg
      @Fambamg  6 ปีที่แล้ว +1

      Not that Im aware of unfortunate. I would suggest buying a Dremel. You want a clean cut so you can apply plastic weld between.

    • @jennifercoulter9808
      @jennifercoulter9808 6 ปีที่แล้ว

      www.cargurus.com/Cars/Discussion-t53845_ds768963?sntEmlId=1978970334#msg852716

  • @thefightofthelamb
    @thefightofthelamb 3 ปีที่แล้ว

    you still have the outside housing casing ill buy it off of you :)

  • @jaycross2562
    @jaycross2562 5 ปีที่แล้ว +2

    Fucken GMC!!! So disappointed.

  • @ClarkBR549
    @ClarkBR549 5 ปีที่แล้ว +2

    Buy a $60,000 SUV and gotta put up with piece of shit taillights. Another reason why I don't buy GM.

  • @dustinholt7308
    @dustinholt7308 3 ปีที่แล้ว

    Unethical?

  • @madmike4
    @madmike4 4 ปีที่แล้ว +2

    Toyota Tundra all the way .