Thanks for watching! :) 👉 If you enjoyed this content, please consider leaving a tip! It helps a lot! :) Tip via PayPal: bit.ly/3EA04xP 🏅 New! Become a member of the AviationPro channel & unlock extra perks! th-cam.com/channels/eAbVr5nEFwtYnEY42dIuuA.htmljoin 👉 Check out my Dash-8 Q400 Cold & Dark Startup Tutorial! th-cam.com/video/pXY6O3WhxpM/w-d-xo.html
Hi teacher.thanks for this video.im from iran.787 is my favorit.but you teach only cold and dark and taxi of this aircraft?i dont know decsent and landing.help me please
My neighbour is a B787 captain and because of Corona mostly at home. He asked me about a sim model. I am using X-Plane11.50 and there is no such a suitable model! Now I saw your tutorial and the QualityWings Boeing 787 on Prepare3D (that I son't own) and sent him the link. His reaction was "I'm really shocked - I never knew there was such software for amateurs !!! And I'm serious In my opinion, the resolution and reliability of the displays are really fantastic and represent the plane 1: 1". As I have simulation hardwire, he asked if I can set Windows, prepare3D and the QualityWings model on my iMac27 (High End), so he can train too. Long story because I would like to get some tips and hints for Prepare3D usage and aircraft model installation (need of additional plugins etc.) Thanks for help
16:20 A little bit surprised the speed brake is deployed, and worry if it will be recovered. 44:58 "Speedbrake, oh, it's on for some reason XDD" Good catch!!
This is a very comprehensive and focused video that manages to communicate an enormous amount of relevant information in an easy, friendly and efficient manner. Thank you.
I've been contemplating on getting into this aircraft and now I think I feel comfortable enough to get started. I'm a Boeing guy so this is pretty easy to learn, thanks for the tips and the guidance, extremely helpful.
Another way to make the QW787 cold and dark automatically is to go to the QW787.cfg in the QW folder in P3D folder, and then remove the // from //panelstate=coldanddark.pnl If you know a thing or two about Java programming you would know that // is a comment to your code, so in other words the text behind the //does not have any meaning. But if you remove the // it will become a coded command to start the plane in a cold and dark state by default.
Nice video, so we maintenance crew rarely keep the battery on, we only use it if we need to start the APU when there are no external powers… also the 787 is very hungry for electrical power it has 2 generators on each engine with a total of four each capable of supplying 235VAC 250KVA
You can use the keyboard, you used to enter the ZFW into the EFB, to put in the exact fuel and passenger payloads, instead of using those very annoying sliders ;-)
Good video! But one thing I noticed was that you left the strobe light on the whole time. This isn’t your fault though because cold and dark panel does not turn off the strobe light, so if anyone else is reading this remember to turn it off when you set cold and dark. Great video though as always!
Thanks! Yeah indeed, good catch. When I was editing I was wondering: is that switch really on? Never touched it! Hope they update the panel state sometime :)
Very nice video! I fly the 787 in FSX-SE and found it really hard to use the EFB to begin with, especially getting an accurate value for the takeoff trim setting. But your video has exposed much more of what it available on this aircraft model, much of which does not seem to be very well documented ! Thank you. Like you, I add my approach and landing into the FMC, knowing I can always change it later if need be. It gives a more accurate distance/fuel burn calculation. My only criticism would be to maybe go a little slower! You speak quite quickly and move across the displays very quickly. Some viewers might find this a problem when trying to learn. Well done. Great piece of work!
Can you please make a video of how to plan an approach and land 787 please. I prefer listening to you then other yt video. I can understand your teaching more easier.
I am a beginner of this simulator, please teach how to you switch the cam smoothly, I need to click me right buttom of my mouse everytime and its annoying
Thanks for the very detailed tutorial! You explained each step very well. If I wanted to save the panel state up to but not including Start R engine (and then left) could load it without going thru entire process on next flight? TIA.
You are amazing..I loved this video..I retired from American Airlines..6 years ago.and this is so fun for me...I was a Ramper...so I want to see the take off,and landing...is it out...????
Does REX Skyforce gives you the sunlight illumination on panels? Actually it was moving with the aircraft when it was doing pushback! That was awesome. How can I set that up?
Hi. Amazing tutorial!! Thank you so much!! I have a question How can I know how much runway I have to spare in case of a rejected takeoff when I'm doing my performance calculations because it doesn't show there
Great video. How do you enter Mach speed into legs page in this aircraft? Also, releasing parking brakes is done via pressing the brake/rudder pedals, not the parking brake lever. It will release the parking brake and will keep aircraft from doing any sudden movements.
@@AviationPro Yeah those modes work, but I was wondering if I could customize my vertical profile as such from the legs page. I myself have tried many combinations and have not been able to enter Mach speed as sector restriction. Really useful for oceanic crossing, especially when you plan on being away at the transit point. One would think they would include such a simple, but really useful FMS feature.
Hi, Very informative. Question thou! Is it still buggy? For instance I’ve read that sometimes one of the engines won’t start on pushback? VNAV issues? Also watching videos, I’ve noticed there is flaps retract call outs after take off. Which is neat, does it also do it on approach and landing phase of flight? Thanks Merry Christmas
great video thank ! after 4yrs of having a break of flightsim I would like to move from fsx to p3dv4.And of course 787 is my fav aircraft. just wondering if asn weather prog would work? thanks for any replies
Nice video, helped me a lot, but how do you get the dispatcher to show you kg and not lbs, would be glad if you can help me fix this little problem. Thx :)
AviationPro thank you very much. Found it and now it works, i would love to see from you a pfpx tutorial and how you plan your flights etc. Would be interesting. Keep up the good work
AviationPro I really did, it was greatly accurate, and not only that, it’s shows me what to expect from a future 787. I have one at the mo in x-plane 11, but no pop out windows! I’m about to add a second display for the PFD/MFD and a 3rd display for the centre console. This won’t work with my 787 😢. But just getting one up and running WITH FMC! great video dude. 👌🏻👌🏻
Hi...have a question ... when I take off with 787 qualitywings ... without a flight plan the engines go to a standstill minimum speed and the plane stalls. I don't understand why happening this?? Is normal.? Don't want flight plan only...take off.
Very helpful tutorial, alleen vroeg ik me af bij het invullen van de waardes van de fuel en de payload. Ik heb alleen een slider in de sim jij kan de waardes ook zelf invullen. Weet je waar ik dat zou kunnen instellen?
Great video...but I do have 1 question...with the ETOPS portion and following a NAT track..is it possible to simulate SLOP with a right deviation of 1 or 2nm? Or is there no way to offset your track with this aircraft?
Do we know of a way to contact MagKnight regarding this aircraft? I have it all up and running fine. However, I did only buy this particular one, because of a specific livery was available for it. Just as soon as I went to look after installation the livery has been removed 😞😞 (I know this is the quality wings model) but same idea.
Thanks for watching! :) 👉 If you enjoyed this content, please consider leaving a tip! It helps a lot! :) Tip via PayPal: bit.ly/3EA04xP
🏅 New! Become a member of the AviationPro channel & unlock extra perks!
th-cam.com/channels/eAbVr5nEFwtYnEY42dIuuA.htmljoin
👉 Check out my Dash-8 Q400 Cold & Dark Startup Tutorial! th-cam.com/video/pXY6O3WhxpM/w-d-xo.html
AviationPro how do you contact tower?
Hi teacher.thanks for this video.im from iran.787 is my favorit.but you teach only cold and dark and taxi of this aircraft?i dont know decsent and landing.help me please
Thank u so much sir
My neighbour is a B787 captain and because of Corona mostly at home. He asked me about a sim model. I am using X-Plane11.50 and there is no such a suitable model! Now I saw your tutorial and the QualityWings Boeing 787 on Prepare3D (that I son't own) and sent him the link. His reaction was "I'm really shocked - I never knew there was such software for amateurs !!!
And I'm serious In my opinion, the resolution and reliability of the displays are really fantastic and represent the plane 1: 1". As I have simulation hardwire, he asked if I can set Windows, prepare3D and the QualityWings model on my iMac27 (High End), so he can train too. Long story because I would like to get some tips and hints for Prepare3D usage and aircraft model installation (need of additional plugins etc.) Thanks for help
16:20 A little bit surprised the speed brake is deployed, and worry if it will be recovered.
44:58 "Speedbrake, oh, it's on for some reason XDD" Good catch!!
🤷🏼♂️
I’m here before the MSFS rush to learn now
Great video. The 787, is my favorite Boeing
Thanks!
Me too, it is my favourite Aircraft of all aircrafts🤩
Me too, better than any other plane!
Same
This is a very comprehensive and focused video that manages to communicate an enormous amount of relevant information in an easy, friendly and efficient manner. Thank you.
Thanks!
I'm used to flying the A320 series planes; so this tutorial was very much very needed when I wanted to start flying the 787 as well.
Thank you :)
You’re welcome!
Airbus user, new to Boeing. This tutorial helped me a lottttttttt
Amazing video. You're a natural born teacher. Congrats and thanks! Will there be a sequence of this video?
Thanks! Probably not, but I will probably feature the 787 in a VATSIM full flight some day :)
I've been contemplating on getting into this aircraft and now I think I feel comfortable enough to get started. I'm a Boeing guy so this is pretty easy to learn, thanks for the tips and the guidance, extremely helpful.
You're welcome!
Just purchased this jet. Your tutorial was outstanding. Thank you very much.
Another way to make the QW787 cold and dark automatically is to go to the QW787.cfg in the QW folder in P3D folder, and then remove the // from //panelstate=coldanddark.pnl
If you know a thing or two about Java programming you would know that // is a comment to your code, so in other words the text behind the //does not have any meaning.
But if you remove the // it will become a coded command to start the plane in a cold and dark state by default.
Thank you for your time putting this together. Very informative. now time for me to practice.
very well done video. Do you have any more videos in this particular plane? Would love to see a Part 2 where you show us from takeoff to landing
Nice video, so we maintenance crew rarely keep the battery on, we only use it if we need to start the APU when there are no external powers… also the 787 is very hungry for electrical power it has 2 generators on each engine with a total of four each capable of supplying 235VAC 250KVA
You can use the keyboard, you used to enter the ZFW into the EFB, to put in the exact fuel and passenger payloads, instead of using those very annoying sliders ;-)
Great video. I cannot believe how simple the overhead on the B787 is as compared to the B737NG or the B737MAX.
Thank you!
Thanks! The 788 is my favourite plane and now I can buy it! I didn’t know how to start it
You're welcome!
Great plane it's my main P3D aircraft. Can't wait for the update out shortly.
This helped me a lot. Can you do a tutorial for the 777 landing??? Thanks!
Check out some full flight videos with the 777 here on the channel, they should help!
Thanks for your well guided tutorial ❤️
Dear
Aviation Pro ;)
You have such great Content
Keep it up!
Thank you! :)
Good video! But one thing I noticed was that you left the strobe light on the whole time. This isn’t your fault though because cold and dark panel does not turn off the strobe light, so if anyone else is reading this remember to turn it off when you set cold and dark. Great video though as always!
Thanks! Yeah indeed, good catch. When I was editing I was wondering: is that switch really on? Never touched it! Hope they update the panel state sometime :)
Very nice video! I fly the 787 in FSX-SE and found it really hard to use the EFB to begin with, especially getting an accurate value for the takeoff trim setting. But your video has exposed much more of what it available on this aircraft model, much of which does not seem to be very well documented ! Thank you. Like you, I add my approach and landing into the FMC, knowing I can always change it later if need be. It gives a more accurate distance/fuel burn calculation. My only criticism would be to maybe go a little slower! You speak quite quickly and move across the displays very quickly. Some viewers might find this a problem when trying to learn. Well done. Great piece of work!
Thank you, and for your feedback! :)
great, wonderfull. I will try this.
Clearly explained, thank you so much. Your teaching is much easier to understand then other yt videos. Thanks a lot 🙏
You’re welcome!
Can you please make a video of how to plan an approach and land 787 please. I prefer listening to you then other yt video. I can understand your teaching more easier.
know that how you do a tutorialshowing just what you talking about sir keep up the good work
Thanks!
What a great timing,actually just got this bird in my virtual hangar 😁
Awesome! :)
I am a beginner of this simulator, please teach how to you switch the cam smoothly, I need to click me right buttom of my mouse everytime and its annoying
Best video I have ever seen! Great job! Thank you for taking the time to make this video
Thank you! :)
Amazing job and thank you! You helped me a lot!
You're welcome! :)
Thanks for the very detailed tutorial! You explained each step very well.
If I wanted to save the panel state up to but not including Start R engine (and then left) could load it without going thru entire process on next flight? TIA.
How do you make the cockpit texture so clean and no blurry?
My cockpit looks incredibly dark compared to yours. Any tips on getting it lighter with the cockpit textures?
Thank you for this video but i wont ask you about TCAS how can i use TCAS in 787 ?
and i wont video for take off and aproch and desent and landing ?
Very nice tutorial!
Thanks!
@@AviationPro Next the Airbus maybe? ;-)
Another excellent instructional video, thank you!
You’re welcome!
I love this tutorial …Any chance to see the rest … such as onflight - approach and landing tutorials ??
Thanks! I might take the 787 out on a flight some day
Excellent video! Debating about getting this and the QW757. Keep up the great work.
Thanks!
My good man please PLEASE do FSLabs A319/A320X. There is no good tutorial on them for Cold and Dark imo.
hello my question is does the qw 787 have a working weather radar and if so how do you activate it? hopefully someone else sees it. Thanks!
Just excellent
Very Nice Thanks
beatifulllllll video you are a really great man you taught me everything about aviation. can I ask how to do the route offset in the 787?
You are amazing..I loved this video..I retired from American Airlines..6 years ago.and this is so fun for me...I was a Ramper...so I want to see the take off,and landing...is it out...????
Thanks!
Thank you very much for your explanation. How can I change the settings from lbs to kg ?
Does REX Skyforce gives you the sunlight illumination on panels? Actually it was moving with the aircraft when it was doing pushback! That was awesome. How can I set that up?
No that's default in Prepar3D in you enable internal shadows ;)
nice video! thank you for the job you have done, dude!
Hi. Amazing tutorial!! Thank you so much!! I have a question How can I know how much runway I have to spare in case of a rejected takeoff when I'm doing my performance calculations because it doesn't show there
Once you reach V1, you cant reject the take off anymore. The V1 Will be determined in your perf init
@@guilhermeeloy6433 Yes but shouldn't I know how much runway to spare I have after reaching V1?
how come when export a flight plane with simbrie \f and savy it in the qualitwings folder, i hit route request and nothing shows up. plz help
Great video. How do you enter Mach speed into legs page in this aircraft? Also, releasing parking brakes is done via pressing the brake/rudder pedals, not the parking brake lever. It will release the parking brake and will keep aircraft from doing any sudden movements.
Thanks! That should be possible through the VNAV CRZ page or simply selecting a MACH number in the speed window and hit the speed selector.
@@AviationPro Yeah those modes work, but I was wondering if I could customize my vertical profile as such from the legs page. I myself have tried many combinations and have not been able to enter Mach speed as sector restriction. Really useful for oceanic crossing, especially when you plan on being away at the transit point. One would think they would include such a simple, but really useful FMS feature.
wow the IRS align is only off and on, in the 747 there were a few more selections
Thank you for this very good tutorial. may I ask if the VOR of your QW787 works properly ? how can I set VOR course in the FMC?
Thank you.
Great video. thanks for sharing.
By the way what is that ''info'' key on display selected panel is used for?
Hello with which application you calculate the fuel and those things would help me a lot for my flights
Hi,
Very informative.
Question thou! Is it still buggy?
For instance I’ve read that sometimes one of the engines won’t start on pushback?
VNAV issues?
Also watching videos, I’ve noticed there is flaps retract call outs after take off.
Which is neat, does it also do it on approach and landing phase of flight?
Thanks
Merry Christmas
Very helpful, even for a MSFS sim pilot. Subscribed :)
INCREDIBLE...thank you!!
Nicely explained,easy to follow
Thanks! :)
Wow very informative. Thank you!
Thanks for watching!
How you achieve the reflecion in the displays ? thanks
Not sure, but somewhere on the forum there are instructions to enable high quality displays
There's a new qw787 update
How can I change the settings from lbs to kg ?
Never knew a jet of this size is soo easy to set up
great video thank ! after 4yrs of having a break of flightsim I would like to move from fsx to p3dv4.And of course 787 is my fav aircraft. just wondering if asn weather prog would work? thanks for any replies
Requesting the wind data on mine says data 0 hours old
Hallo at my Sim dont open the Qualitywings Panel can you say me Why?
Hey How can I dim my FMC because it is very Bright
Nice video, helped me a lot, but how do you get the dispatcher to show you kg and not lbs, would be glad if you can help me fix this little problem. Thx :)
You’re welcome! You have to put the entire aircraft in KGs. It’s done via the INFO page in the PFD, or you can adjust it in the livery manager
AviationPro thank you very much. Found it and now it works, i would love to see from you a pfpx tutorial and how you plan your flights etc. Would be interesting. Keep up the good work
Hi, is possible to set a DIRECT in the FMC? I seem it doesn't work like other Boeing.
Mine said UNABLE TO START QW787-1
HOW TO SET THE TRIM, IT STAYS AT 0
Can you please make a start up tutorial on airbus a330neo??
where do you get the add on for the QUALITY-WINGS ULTIMATE 787?
great video 👍 where i can switch from lbs to kg? ...thank you
@RedBullRacing Thank you...figured out..thanks again
Loved it !!!
😃
AviationPro I really did, it was greatly accurate, and not only that, it’s shows me what to expect from a future 787. I have one at the mo in x-plane 11, but no pop out windows! I’m about to add a second display for the PFD/MFD and a 3rd display for the centre console. This won’t work with my 787 😢. But just getting one up and running WITH FMC! great video dude. 👌🏻👌🏻
How do I change the bright of the PFD and CDU screen?
PREPAR3D V4.5???
Great video!
Top Tutoriel tanks
Hello dude, how did you get this TUG for GSX? I don't have it in p3dv5
I wish the Xbox version would come with all the perks, all the add-ons. Maybe someday
This isn’t MSFS2020
What an awesome video. Thx😁
Thanks for watching!
May I suggest you enable the shadows. The plane looks like it floating or something.
They are enabled actually, however they might not always appear in the video due to the camera angle.
How did you set your fuel calculating unit as KGS? Although I set that in the Dispatcher app, it’s still LBS.
Hi...have a question ... when I take off with 787 qualitywings ... without a flight plan the engines go to a standstill minimum speed and the plane stalls. I don't understand why happening this?? Is normal.? Don't want flight plan only...take off.
Is there a way to spawn cold and dark ?
Nice video! Thanks. Are you returning to flightsim at any point?
Thanks! I do still flightsim every now and then
Very helpful tutorial, alleen vroeg ik me af bij het invullen van de waardes van de fuel en de payload. Ik heb alleen een slider in de sim jij kan de waardes ook zelf invullen. Weet je waar ik dat zou kunnen instellen?
Je moet gewoon op die waardes klikken, als het goed is kan je het dan invullen.
Following your videos I got enthusiast to the virtual flight. I would like advice if to buy FSX or Prepared3D. Tanks
Go for Prepar3D if you are choosing between those two, it's a lot more optimized than FSX and will be in the future :)
@@AviationPro thanks for your advice
Hello, can you tell me, how i can pushback my qw787 like i dont have gsx and different program to pushback?
Nice video man!
Thanks!
good.
nice video, how do you change pounds to kg on the 787?
I want the simulator that you use now
how did you set the efb to kgs? i checked it on the qw dispatcher but hasnt changed in the efb
Do you think this is the best 787 model?
Whaaaaaaaaaaaaaaat niiice, i didn't know thet you have b787👌👌👌
I actually reviewed it some time ago! :)
Great video...but I do have 1 question...with the ETOPS portion and following a NAT track..is it possible to simulate SLOP with a right deviation of 1 or 2nm? Or is there no way to offset your track with this aircraft?
Thanks! It should be possible, never tried that myself in the QW787 though, but it would be weird if it's not there..
@@AviationPro Ya..no option in FMC for offset..the manual shows the dotted track for offset but doesn't show how to do it...so thats awesome lol
Do we know of a way to contact MagKnight regarding this aircraft? I have it all up and running fine. However, I did only buy this particular one, because of a specific livery was available for it. Just as soon as I went to look after installation the livery has been removed 😞😞 (I know this is the quality wings model) but same idea.