Great guide this mate! Nice to see someone doing it with close ups and encountering and then resolving the issues every tinter has whilst starting out.
I saw this video when you posted it a few years ago. I just wanna say your video is hands down the best on youtube and a massive thank you sir for sharing your skills and knowledge 👍
My tinting foil came in as foil only, not a carton roll in there. Not expecting it to be that slippery, the whole inside of the roll just slide down and as an reacting I grabbed it harder, causing it to crease the whole roll..😭. for those who have a similar roll, I recommend holding it at the bottom or with two hands and roll it out over the window as you stick it to the window
You all prolly dont care at all but does anybody know a way to log back into an instagram account?? I was stupid lost the login password. I would love any tips you can give me
@Hezekiah Abdiel I really appreciate your reply. I found the site thru google and im waiting for the hacking stuff atm. Takes a while so I will reply here later with my results.
Great Demo Vid . Nice Work ! Easy to Follow instructions. I failed my first attempt on 2 small rear windows not realizing the cheap heat gun i got off ebay wasn't hot enough to actually shrink , so now im going to borrow a real heat gun and have another go soon.
Bro!! You're an absolute legend. I've watched a few videos now on this but nobody was answering the key questions. Is the tint directional? What solution are you using etc. You literally addressed every single point. I'm gonna attempt this over the weekend armed with all the knowledge you passed on. God bless you brother 🙏
@@ryanbrilliant6793 Fully flopped lol. Took the roll outside. A gust of wind came and creased the whole roll 😂 Tried cutting the film against the rubber seals but ended up with a fully jagged edge. I've done all sorts of mechanical, electrical and paint jobs but I think tinting just ain't for me 😂 I may try again when I have some free time
Thank you for the video, this really helped me a lot learning online., there was guy who tried to charge me £400 just to teach me how to tint the window.. ridiculous.. thank you again!!
This is the only video I've found where you explain how to shrink the fingers and where to place them first. I'm going to try and do mine Again with this extra knowledge. Thanks.
@@ryanbrilliant6793 yeah I messed it up 😒 it all went well except one of the corners wouldn't tuck in to both sides at the same time and it ended up creasing and not sticking down. But 3 of the windows were OK I still need to do the back 1. I bought ready cut tint so now I need to buy a roll to replace the 1 window. But I managed to get the fingers out by using this video. I guess i just need more practice. But thanks 😁
thank you for a clear easy to follow instruction, appreciate your video! I will attempt my first tint ever on the hatchback of my toyota hiace! do you think a hair dryer will be hot enough for shrinking? and..i've noticed small rectangular compartments on the inside of the glass itself that connect the defrosting wires..i reckon i'll cut from outside the window and see the line of the boxes..fingers cross it'll all line up nicely!! Thanks again.
Hey, can you tell me why you don't heat-shrink and cut to size, before moving to the inside? I don't understand that part. If you cut it when it's all wrinkled, how does it fit properly on the inside? Thanks in advance.
I don’t understand I was following all the steps an then it got to the bit where u first squeege the middle part and across then the two sides going up and down but even the first time I put there squeegee on the glass and went across it jus scrunched up and I ended up getting cracks everywhere in it where it wasn’t laying down was so fckn frustrating
Dan Davidson mate are you thicker than glass itself. Bro you always cut on the glass just don’t dig the knife in and you won’t scratch it. How else are you going to cut the tint to shape without being a bell end and wasting excess time
@@boblad77 got on fine apart from the door part. The rear did not shrink as well as I wanted. Be patient. I was hurrying it a bit. Turned out alright though.
Hi there dear friend, I like your video, if I use not expensive film tint, and like cheap as usual, they sell in accessories shops, is going to be easy to install, or I have to buy, something, quality, like something expensive , I will be happy to have your positive reply, any film tint company, recommendation
Yes mate this is me. Use Suntek tint. You can buy it from mdpsupplies.co.uk. Problem with the cheaper tint is that it won’t heat shrink and it makes the job a lot harder because it is such bad quality
Great vid. Fully explaining and getting rid of the fingers.... should have watch your vid before my first attempt on the rear window... 2nd attempt is going to be so much easier. Thanks
use a heat gun to heat the outside whilst pushing the bubbles back down. eventually they will stick. unless there to big and if so that means you did heat shrink sufficiently
no its much easier to do it on the outside because the film is thicker as u haven't removed the outer protective layer and also more space to work around
2 years later still waiting to tint my side window's, least the back looks sweet 😂😂
Its impossible in bravo 2 to tint side Windows without taking out Window from door 😓
You made it look so easy, I tried 4 times and couldn't even get creases out and wasted half the tint roll 🤣
Thank you for clearly explaining how to shrink the film.... many tutorials on here of how to tint but they gloss over the shrinking.
Great guide this mate! Nice to see someone doing it with close ups and encountering and then resolving the issues every tinter has whilst starting out.
thanks so much mate!
I saw this video when you posted it a few years ago. I just wanna say your video is hands down the best on youtube and a massive thank you sir for sharing your skills and knowledge 👍
My tinting foil came in as foil only, not a carton roll in there. Not expecting it to be that slippery, the whole inside of the roll just slide down and as an reacting I grabbed it harder, causing it to crease the whole roll..😭. for those who have a similar roll, I recommend holding it at the bottom or with two hands and roll it out over the window as you stick it to the window
You make it look so easy boss lol, I'm going to have a crack at doing it. Thanks for the guide
Can you use a hair dryer instead of the heat gun
You should post more videos!! You’re a true teacher. You have a clear way of explaining things
You all prolly dont care at all but does anybody know a way to log back into an instagram account??
I was stupid lost the login password. I would love any tips you can give me
@Nicolas Achilles instablaster ;)
@Hezekiah Abdiel I really appreciate your reply. I found the site thru google and im waiting for the hacking stuff atm.
Takes a while so I will reply here later with my results.
@Hezekiah Abdiel it did the trick and I finally got access to my account again. I'm so happy:D
Thanks so much, you saved my account!
@Nicolas Achilles No problem :D
I have a question, I don’t have a heat gun what can I do? I was thinking of using a hair dryer? Or is it necessary to use a heat gun?
Great Demo Vid . Nice Work ! Easy to Follow instructions. I failed my first attempt on 2 small rear windows not realizing the cheap heat gun i got off ebay wasn't hot enough to actually shrink , so now im going to borrow a real heat gun and have another go soon.
Nice job, never gonna attempt this but if i did, now i'm an expert. keep up the good work
Bro!! You're an absolute legend. I've watched a few videos now on this but nobody was answering the key questions. Is the tint directional? What solution are you using etc. You literally addressed every single point. I'm gonna attempt this over the weekend armed with all the knowledge you passed on.
God bless you brother 🙏
hey bro thanks so much for the positive comment. how did you get on? I can help you furthermore? thanks
@@ryanbrilliant6793 Fully flopped lol. Took the roll outside. A gust of wind came and creased the whole roll 😂
Tried cutting the film against the rubber seals but ended up with a fully jagged edge.
I've done all sorts of mechanical, electrical and paint jobs but I think tinting just ain't for me 😂
I may try again when I have some free time
@@salimsheikh2580 haha I fuck everything hopefully this not going to be the case with this
@@Prince-yw4lk Good luck broski!
Thank you for the video, this really helped me a lot learning online., there was guy who tried to charge me £400 just to teach me how to tint the window.. ridiculous.. thank you again!!
hi great to know. how can I help further? anything your struggling with?
@@ryanbrilliant6793 no brother! Now practicing on my mates cars..😅
If I buy pre cut tints do I still need the heat gun for it to work? Thanks for this video
yes
This is the only video I've found where you explain how to shrink the fingers and where to place them first.
I'm going to try and do mine Again with this extra knowledge.
Thanks.
your very welcome. how is it going? need more help?
@@ryanbrilliant6793 yeah I messed it up 😒 it all went well except one of the corners wouldn't tuck in to both sides at the same time and it ended up creasing and not sticking down.
But 3 of the windows were OK I still need to do the back 1.
I bought ready cut tint so now I need to buy a roll to replace the 1 window.
But I managed to get the fingers out by using this video.
I guess i just need more practice.
But thanks 😁
Bro 😅😅😆😆😆tf .. We in Jamaica only use the spray bottle, the squeegee and the stencil .. it turns out better than this 😂😂
Thanks dude a lot of healp , Peace
You taught me and now I’m teaching others! U a hero!
That was quite honest guide mate ty
thank you for a clear easy to follow instruction, appreciate your video! I will attempt my first tint ever on the hatchback of my toyota hiace! do you think a hair dryer will be hot enough for shrinking? and..i've noticed small rectangular compartments on the inside of the glass itself that connect the defrosting wires..i reckon i'll cut from outside the window and see the line of the boxes..fingers cross it'll all line up nicely!! Thanks again.
Hey Mate, great video! Just wanted to know what % tint did you use for this car ?
It’s limo tint, 5% light
How can i make the film adhere to the edges on the screen printing of the glass? I have the whole edge with the white effect of non-adhesion....
Way to complicated dry shrinking is much easier
Hi,like your video ,same rear car window price please.kind regards .are you near London
Brilliant video helped me
Alot cheers bud!
Helped me for real, no dry shrinking etc. Thanks boss.
How much do you charge for tinting?
Bro best window tint video I think I seen simple easy to follow. 👍
If u dont have a heat gun can u still go ahead with tinting
I don't know why but you make me laugh so much.
Nice and easy video for new people thanks
Great video, really helpful thank you
Why did i get a rainbow effect in some places when looking from outside?
probably just condensation so should go
Hey, can you tell me why you don't heat-shrink and cut to size, before moving to the inside? I don't understand that part. If you cut it when it's all wrinkled, how does it fit properly on the inside? Thanks in advance.
I been tinting for 2 days and swear down I think this guy is bullshitting us 20 years and I can do a better job 🤦🏽♂️fraud
Great done
Thanks Ryan, I was struggling to get a bubble free finish. I'm having one more attempt with the last of my tint using your tutorial.
How did it go
Would a hair dryer work any bit for this
Yes it will but will take longer
It's mi t my brother. Great job. I do great on all windows. Just have some trouble with the rear window and I just got a good lead. Tha KS again
Doing a H pattern this thick whilst also wet shrinking will cause you a world of problems on curvier windows
很棒的工作...
Just wondering why you didn't used soap with a cloth or baby powder ??? You just used water with washing up liquid and looks better I think
How can I purchase this tint film in the U.K?
I don’t understand I was following all the steps an then it got to the bit where u first squeege the middle part and across then the two sides going up and down but even the first time I put there squeegee on the glass and went across it jus scrunched up and I ended up getting cracks everywhere in it where it wasn’t laying down was so fckn frustrating
Reason that my foil doesn’t shrink right is just bad foil? What foil do i need to look at?
Brilliant job mate! How much would you charge for my 5 door mk5 vw golf?
what do you think of these ebay pre-cut tints? would that be a better option for non cutting?
All the ppl struggling to tint. Practise makes Perfect. You cant expect a perfect fit first time😂
Really good tutorial, make,s it look easy "I'am sure it's not though" lol .
Get onto a Golf 5 or a beetle !
www.sussexwindowtinting.co.uk/
Great video man. 👍
IsJohnsons baby shampoo is that Yelow one??
Good job, nice and clean and clear
Thank you, Easyest guide I seen online yet
this look very very bad i mean wtf u doing
Excellent vid ,not full of bulls...t straight to the job.thx
Mate this it full of bullshit you would never cut on the glass like that in case you damaged the glass
Dan Davidson mate are you thicker than glass itself. Bro you always cut on the glass just don’t dig the knife in and you won’t scratch it. How else are you going to cut the tint to shape without being a bell end and wasting excess time
Let's see the side window video!
yeah, i'mma just pay someone to do it lol
How do get a perfect dot matrix?
Hi. you said you leave us the links where we can find what we need..
Bro! Excellent tutorial
Hilarious
Can I use hair dryer instead heat gun?
Great tutorial. About to tackle mine today. this is very helpful indeed.
how did you get on? am going do mine tomorrow..
@@boblad77 got on fine apart from the door part. The rear did not shrink as well as I wanted. Be patient. I was hurrying it a bit. Turned out alright though.
A one hit wonder? ;)
Great job I need a heat gun 😁
Hi there dear friend, I like your video, if I use not expensive film tint, and like cheap as usual, they sell in accessories shops, is going to be easy to install, or I have to buy, something, quality, like something expensive , I will be happy to have your positive reply, any film tint company, recommendation
Yes mate this is me. Use Suntek tint. You can buy it from mdpsupplies.co.uk. Problem with the cheaper tint is that it won’t heat shrink and it makes the job a lot harder because it is such bad quality
Where do you get tint from ?
really east to follow
Great video
What brand tint do you use
ben chan nice t
Great vid. Fully explaining and getting rid of the fingers.... should have watch your vid before my first attempt on the rear window... 2nd attempt is going to be so much easier. Thanks
hey how did it go?
@@ryanbrilliant6793 sort of ok. Side widows was spot on, but the rear tailgate window, not so good
WOW! your good!
👍
Nice job, I'll give this a shot since I don't trust anyone else to touch my shitbox. Is it worth getting the expensive film?
yeap! you can try Llumar ATC. it is much better.
Excellent
Great video bro u made it look so easy
Excellent video
brilliant
Have never seen somebody shrink w a glove that’s dope 👍
Will be trying that
Good Mr
Greetings, what shampoo do you use?
Head and shoulders
If there is anyone here to learn how to tint please leave and dont take any of what he just said or did as a good thing!
Why, what is he doing wrong? Just asking.
Hi mate how much on average can you make doing this
Sky's the limit!
Hindi l..
Suntek it's a good film?
If it's carbon based then yes. The other/cheap stuff will fade in the sun as it's coloured using dye.
Ok now front doors please
The headace occurs later when the air bubbles creeks back on the edges.
use a heat gun to heat the outside whilst pushing the bubbles back down. eventually they will stick. unless there to big and if so that means you did heat shrink sufficiently
Did the tint ever interfere with the defrosting lines?
It doesn't
Can u use a hairdryer rather than a heat gun
Not not hot enough, tried with a crap heat gun and did not work
Bravvvo
Very nice 👌👌👌👌🚗🚗
i was wondering,could a home window tint film be used on a car window?would it shrink?
no it won't shrink
Why do we stick n shrink outside and place the sticker inside finally? Can we instead place the sticker inside directly and shrink it?
no its much easier to do it on the outside because the film is thicker as u haven't removed the outer protective layer and also more space to work around
@@ryanbrilliant6793 Got it. Thanks for the reply!
like
👨🎓👍
Great video
Thats one of the most easy back glass to do !
It all depends on the shape of the glass