I'm having this issue where I set my perf cut just right with the test cut, do a job and the top right of any cut doesn't come out clean, rest of everything is perfect, then as I approach the left side of the platen the cut pressures seem even more off...
This is kicking my Arse. Machine cut great for the first month. Now i can't die cut worth a hoot. Kiss cut works fine but it bangs really loud when it "cuts" I set the blade depth exactly like you did, I'm all the way up to 450 and I can't cut through the backer and Vinyl at all. (4 mm ) I basically have to turn the blade manually down a little more to get it to try and cut through then I get jagged edge problems. Replaced the cutting stick too. I don't even cut much. About to just buy an offline cutter because of the time I waste trying to get this thing to die cut. I dread people asking for contour cut because I can't get this thing to work correctly. New blades, new stick, what am I missing here?
I have been trying to do this for 5 years, thank you for your help, !!! now,,,, can you do this thru fine cut??? i tried and was able to but i did it by mistake. i notice if i send the file as eps and open it the colors are there. I made 2 fine cut contour layers (corel) when i got to the fine cut macro i assigned each cut layer a panel cut name, eg cut1 and cut 2. it worked one time then i must have changed something. Where the difference is, is when i went into cut edit i saw the 2 cut layers but instead of showing the color it was showing a number instead. I did it a couple times and the number kept changing. It was getting late and i was loosing focus. Thanks for the video this is the furthest i ever got.
Do you know what would be causing my file/Mimaki to be cutting the perf 3 times instead of once? It goes back and forth on each side for a total of 3 times before moving on to the top, right side, and bottom. Otherwise settings are perfect.
Just want to thank you again for taking the time to make these video's. They are worth their weight in gold.
Thanks for this video, it helps me a lot. Especially the info with Half Cut.
The knowledge acquired surpassed the background noise and bad camera angles. Great info and was able to setup my print-cut workflow properly
Operator did very bad job
are you using the pen line rubber or sponge when when doing the cuts? I only have the penline rubber
Camera man is not good
We do the best we can..... Is there something you need help with? We would be glad to help you
I'm having this issue where I set my perf cut just right with the test cut, do a job and the top right of any cut doesn't come out clean, rest of everything is perfect, then as I approach the left side of the platen the cut pressures seem even more off...
This is kicking my Arse. Machine cut great for the first month. Now i can't die cut worth a hoot. Kiss cut works fine but it bangs really loud when it "cuts" I set the blade depth exactly like you did, I'm all the way up to 450 and I can't cut through the backer and Vinyl at all. (4 mm ) I basically have to turn the blade manually down a little more to get it to try and cut through then I get jagged edge problems. Replaced the cutting stick too. I don't even cut much. About to just buy an offline cutter because of the time I waste trying to get this thing to die cut. I dread people asking for contour cut because I can't get this thing to work correctly. New blades, new stick, what am I missing here?
Thanks for the video. Pls sir can I get your WhatsApp number
I have been trying to do this for 5 years, thank you for your help, !!! now,,,, can you do this thru fine cut??? i tried and was able to but i did it by mistake. i notice if i send the file as eps and open it the colors are there. I made 2 fine cut contour layers (corel) when i got to the fine cut macro i assigned each cut layer a panel cut name, eg cut1 and cut 2. it worked one time then i must have changed something. Where the difference is, is when i went into cut edit i saw the 2 cut layers but instead of showing the color it was showing a number instead. I did it a couple times and the number kept changing. It was getting late and i was loosing focus. Thanks for the video this is the furthest i ever got.
white print on blue foil with cutout, how do you do what I have tried but it can not find the marks?
I have a UCJV300 series
This guy is a god send, Still cant get it to work tho😭
Do you have any tips for ID Cut on chrome?
Do you know what would be causing my file/Mimaki to be cutting the perf 3 times instead of once? It goes back and forth on each side for a total of 3 times before moving on to the top, right side, and bottom. Otherwise settings are perfect.
Part 3 coming anytime??
Really helpful information. Thank you.
Hello, Part 3 is up. LEt me know if you have any questions
Good afternoon sir is it possible can you assist with us for mimaki printer how to set ailments
GOOD JOB ...
how do you tell it to do a perf cut?
What happen to part 3
Thank you Sir!
I got this machine and the support is laughable.
Who is your dealer?