Thanks for this! Very informative. Even though I've Threadlocked EVERYTHING, I don't think I will add the Vibration Motor! 😳 Nice, just not my thing. Hobbyconcepts did a Video on this unit... He ripped it apart. Probably because his Store doesn't sell it!! Yours is the second Video I've seen, that gives it a good review. I may consider it. 😉
The sound module has a power input pin and. It needs to be powered by using an additional cable that connects from PPM on receiver to sound module power pin. Please watch same video from 4.50 ...hope this helps...
hi there Well done on this video very informative and great explanation of where all connections go, my Bro Col just purchased one and the instructions was a sheet of paper in very poorly translated to English, as you know names and numbers on unit and receiver don't match. We've had real problems trying to sort it out and gearchange servo keeps going to full throw every time we plug it in, (possibly Faulty) hopefully with help of you're video we'll get it running properly 10 out 0f 10 feller well done
hello there, thank you for your response and i am happy that this video really helped you wire the unit properly. yes you are correct, the instructions that come with the unit is totally useless. it took me almost a day to figure out the wiring. if you have any doubts, please send me an email at rctruckzblr@gmail.com
thx alot for the helpful explanation, i have one issue the vibration is not working, i try to connect it direct to electric and the motor works its not working with the sound system if u can help that will be great
Hi sorry for the late reply. I was held up with a bus build...the vibrating motor goes to pin 2. The white wire wld be on the topmost lead and the red wire on the middle pic. Im sure you are connecting it wrong..please recheck the leads where you are connecting it.
Kudos for this good step by step instructions mate, its going to help a lot of us out there who don't want to spend a fortune on Tamiyas MFCs which just for the similar kit you pay around $400 (insane prices and for the brand I suppose). I saw this GT ones going for about $120 on rcmart with a combo set. Going to get it and watch your vids again. PS - can you show how you set up the transmitter etc? thanks in advance!
Hi I am glad this video was of help to you. th-cam.com/video/U4esma5A1S4/w-d-xo.html Please click this link as i have a video about connecting futaba radios. most radios should be almost the same Hope this helps
@@RCTRUCKZ yup saw that, did you had to adjust the gimbals to self center on both sides? Most of if not all the stick type controllers are made for drones and flight RCs.
im sorry , not sure about it, but the futaba radio on my video is for the surface models. the G T Pro wiring video has the avionics radio, its for the airplanes. the control sticks on the avionics radio has the self center feature on one side.
@@RCTRUCKZ Ah ok, not the perfect solution. That's what I have now, and no matter how far I steer, it turns on the indicator. Is there a way to connect a trailer to this system?
Thank you for watching . Maybe you should try to see if you have wired it wrong. Just interchange the wires on your receiver so it works on the channel you need
RC TRUCKZ thank for the answear.i try to change the wired, but if i change it the front light are not working.only the signaling, and horn are working.
Pin 4 on the sound module input side goes to channel 1, pin 3 to channel 3, pin 2 to channel 5 and pin 1 to channel 2. My radio is a 6 channel unit. Between 6:50 till 8:15 on the time of the video this information is available. Hope this helps..
@@abhilashsukumarannair3246 that box has a micro processor which is coded to make sound and give lighting outputs to the truck from a transmitter The speakers and the lights are connected to the control box
@@RCTRUCKZ Ohh..yaahh..thank you dear.... I saw your KSRTC Volvo video....its very good and perfect... Are you making RC Miniature against outside order .....? Bcz if yes then I just want to have one Miniature.....
RC TRUCKZ Thanks mate!! I got in plans buying one of this lovely trucks from Tamiya. Probably Scania r620 plus topline head. 🧐😜plus gt power and good transmitter. Yours looks pretty good and I think it is! I check and look around..... price for this toys can kill 🤯🤯🤯😱😱😱 so before Christmas I don’t think I will be owner;)) more chance after New year. Any way thank you for info!! Take care!!!
@@TX010 wonderful news..!! Goodluck with the build and if you run in to any trouble feel free to email me at. rctruckzblr@gmail.com I will most probably come out with a video on connecting a futaba 4ywd. 4 channel radio to the GT power module. Lets see how it goes.. If cost is a problem you can try the hercules hobby tractor trucks as well. They have the scania 620(250usd) scania 470(220usd), benz actros 3363(210usd) benz 1851(199usd). You can check them out as well. And when you buy make sure you buy an esc and a 80 turns motor to give it a realistic run(videos on my list)....goodluck again...takecare
bonsoir , j'ai fait le même branchement que vous , et j ai l'accélérateur et le changement de vitesses et la direction sur la manette de droite sur la manette de gauche le klaxon et le démarrage moteur , comment faire aussi pour les feux avant allumés avec le feux rouge. merci a vous
salut. J'ai utilisé la connexion du voyant d'état rouge et j'ai ajouté des voyants rouges. le feu de stationnement bleu s'allume également du voyant d'état. le module d'alimentation GT n'a pas de connecteur de feu de stationnement sur son boîtier. nous devons prendre nos propres dispositions.
Bro keep on going u need 100K subs for this hardwork!!!!! keep it up!!!!
Thank you so much 😀 will try my best
Thank you very much! It helped a lot. I used to use 2 batteries, but now i use only one, good job. Btw i have the same Actros from HHobby.
Im happy ...my video was of help to you. Thank you
Thanks for this! Very informative.
Even though I've Threadlocked EVERYTHING, I don't think I will add the Vibration Motor! 😳 Nice, just not my thing.
Hobbyconcepts did a Video on this unit... He ripped it apart. Probably because his Store doesn't sell it!!
Yours is the second Video I've seen, that gives it a good review. I may consider it. 😉
Thanks for sharing your tutorial vid. So my question is how did you power the sound module? Thank you for your help!
The sound module has a power input pin and. It needs to be powered by using an additional cable that connects from PPM on receiver to sound module power pin. Please watch same video from 4.50 ...hope this helps...
hi there Well done on this video very informative and great explanation of where all connections go, my Bro Col just purchased one and the instructions was a sheet of paper in very poorly translated to English, as you know names and numbers on unit and receiver don't match. We've had real problems trying to sort it out and gearchange servo keeps going to full throw every time we plug it in, (possibly Faulty) hopefully with help of you're video we'll get it running properly 10 out 0f 10 feller well done
hello there, thank you for your response and i am happy that this video really helped you wire the unit properly. yes you are correct, the instructions that come with the unit is totally useless. it took me almost a day to figure out the wiring. if you have any doubts, please send me an email at rctruckzblr@gmail.com
Спасибо за видео , очень помог .
welcome
Good job 👏👏
Thank you..
Really helpful thanks Rc Truckz
Im glad it helped you....thanks
thx alot for the helpful explanation, i have one issue the vibration is not working, i try to connect it direct to electric and the motor works its not working with the sound system if u can help that will be great
Hi sorry for the late reply. I was held up with a bus build...the vibrating motor goes to pin 2. The white wire wld be on the topmost lead and the red wire on the middle pic. Im sure you are connecting it wrong..please recheck the leads where you are connecting it.
RC TRUCKZ thx for ur reply am connecting it as u said so realy am stuck with that issue
Kudos for this good step by step instructions mate, its going to help a lot of us out there who don't want to spend a fortune on Tamiyas MFCs which just for the similar kit you pay around $400 (insane prices and for the brand I suppose). I saw this GT ones going for about $120 on rcmart with a combo set. Going to get it and watch your vids again. PS - can you show how you set up the transmitter etc? thanks in advance!
Hi
I am glad this video was of help to you.
th-cam.com/video/U4esma5A1S4/w-d-xo.html
Please click this link as i have a video about connecting futaba radios. most radios should be almost the same
Hope this helps
@@RCTRUCKZ yup saw that, did you had to adjust the gimbals to self center on both sides? Most of if not all the stick type controllers are made for drones and flight RCs.
im sorry , not sure about it, but the futaba radio on my video is for the surface models. the G T Pro wiring video has the avionics radio, its for the airplanes. the control sticks on the avionics radio has the self center feature on one side.
Thant you very much .
Your welcome
Wow, this is very good. u r great thanks
Thank you.
Brasil🚛👏
Will this system work with a pistol grip controller thanx
If its a 2.4 ghz, 6 channel set....it must work. Never tried it with a pistol grip
So the indicator works as soon as you use the steering?
Yes, thats correct. Moving the steering stick either way..makes the indicators glow..
@@RCTRUCKZ Ah ok, not the perfect solution. That's what I have now, and no matter how far I steer, it turns on the indicator.
Is there a way to connect a trailer to this system?
plz try to include items link on description which ur using
Thank you for your suggestion, will add links to the descriptions.
Very nice video.I did the same as you, but I don't know why turning the wheels and going back and forth are on the same button.
Thank you for watching . Maybe you should try to see if you have wired it wrong. Just interchange the wires on your receiver so it works on the channel you need
RC TRUCKZ thank for the answear.i try to change the wired, but if i change it the front light are not working.only the signaling, and horn are working.
@@bologanbogdan6634 what radio are you using ?? Is it a 6 channel or a 4 channel radio??
RC TRUCKZ it a 6 chanel. Model are looking like fly sky, but it modelcraft mp26 dt.
@@bologanbogdan6634 can you email me @ rctruckblr@gmail.com
I've got a power unit but I'm having trouble with the channels what channels did u connect up to from the sound unit to the reciver
Pin 4 on the sound module input side goes to channel 1, pin 3 to channel 3, pin 2 to channel 5 and pin 1 to channel 2. My radio is a 6 channel unit. Between 6:50 till 8:15 on the time of the video this information is available. Hope this helps..
Hello, Can I use a 7.2 V battery?
Yes ...you can use it. It will work
@@RCTRUCKZ Why does it say in the switchboard that it works from 7.4 V up?
@@emergencystrobelight it works from 7.0volts and up
Where did you get the light kit, I haven’t seen that kit before,how much did it cost you for the kit.
Its available on Banggood and ali express, cost is around 50 or 60 USD
battery should be connected at the end
It has a power switch so, i guess its safe to connect the battery. Just my assumption
Hi dear please let me know that from where the engine sound coming very perfectly......please...
Its coming from the blue box(multi function control unit).
@@RCTRUCKZ
That box contains with speaker or sound producing something dear?
@@abhilashsukumarannair3246 that box has a micro processor which is coded to make sound and give lighting outputs to the truck from a transmitter
The speakers and the lights are connected to the control box
@@RCTRUCKZ
Ohh..yaahh..thank you dear....
I saw your KSRTC Volvo video....its very good and perfect...
Are you making RC Miniature against outside order .....? Bcz if yes then I just want to have one Miniature.....
@@abhilashsukumarannair3246 sorry..i have not started taking orders yet. Will let you know..once i start
Nice mate!!!!!!
Thank you
RC TRUCKZ
What model radios you used?
@@TX010 i use an Avionic 6i ...its a 6 channel digital proportional. FHSS 2.4ghz radio
RC TRUCKZ
Thanks mate!!
I got in plans buying one of this lovely trucks from Tamiya. Probably Scania r620 plus topline head. 🧐😜plus gt power and good transmitter. Yours looks pretty good and I think it is! I check and look around..... price for this toys can kill 🤯🤯🤯😱😱😱 so before Christmas I don’t think I will be owner;)) more chance after New year.
Any way thank you for info!! Take care!!!
@@TX010 wonderful news..!! Goodluck with the build and if you run in to any trouble feel free to email me at. rctruckzblr@gmail.com
I will most probably come out with a video on connecting a futaba 4ywd. 4 channel radio to the GT power module. Lets see how it goes.. If cost is a problem you can try the hercules hobby tractor trucks as well. They have the scania 620(250usd) scania 470(220usd), benz actros 3363(210usd) benz 1851(199usd). You can check them out as well. And when you buy make sure you buy an esc and a 80 turns motor to give it a realistic run(videos on my list)....goodluck again...takecare
Can we use fs-i6 6ch 2.4 GHz
yes, you can. it will work
Which site will be get sound system and what is the price please tell me
Please tell me bro
www.rcmart.com, www. aliexpress.com
Donde puedo adquirir un vehículo de esos y cuánto cuesta
puedes comprarlo en www.rcmart.com y el costo es de alrededor de 230 USD
Which ESC controller do you use?
th-cam.com/video/7u_dMizQun0/w-d-xo.html. pls check this link. The esc can be brought from www.rcmart.com
bonsoir , j'ai fait le même branchement que vous , et j ai l'accélérateur et le changement de vitesses et la direction sur la manette de droite
sur la manette de gauche le klaxon et le démarrage moteur , comment faire aussi pour les feux avant allumés avec le feux rouge.
merci a vous
salut. J'ai utilisé la connexion du voyant d'état rouge et j'ai ajouté des voyants rouges. le feu de stationnement bleu s'allume également du voyant d'état. le module d'alimentation GT n'a pas de connecteur de feu de stationnement sur son boîtier. nous devons prendre nos propres dispositions.
Bro where can I get those to buy I want to order one
www.rcmart.com or www.asiatees.com
подписался
thank you
Hi bro agar ap mere comment ko pad rahe ho to rply jarur kare mujhe apse bat karni thi
hi, email me at rctruckzblr@gmail.com
What is the Indian price
prototype, not for sale yet
Cool scania
Bro where are you from
Bengaluru, INDIA
It was all good until the music started and ya quit talking 🙄🤦
im sorry about the music. there was a copyright hit and i had to replace my voice with the music to keep the video there. very sorry.
Trimite mă și mie un cap tractor de la de acolo de la tine că ți le plătesc
vă rugăm să accesați www.rcmart.com
من فين نشتريهن لوسمحتو
www.rcmart.com
unclear bro...
sorry