As an Australian Muscle car enthusiast, im blown away at the sheer size and scope of the American Muscle car scene from the 60/70's. Its very rare here, maybe once or twice a year that an old muscle car from that era is found, but you guys have them popping up on what seems a weekly basis.
'Young Punks' crack me up... I've been in MoPars since 1970, had a new GTX then. I've driven 150 miles at 80 plus MPH with 3.55 gears. Unless you have an existing problem, ANY MoPar engine from the 60's or 70's, even a 318 2 bbl will cruise 80 with 3.55 gears. You must remember... It's not an exploding Chevrolet!
Roy and jamie are amazing down to earth people. I have got some parts from them but the vintage parts are so over priced i cant afford them. Thus why they have all this stuff. Lol roy hates to sell stuff too but thats a roy thing 😂 nice job showing everything so much cool stuff.
All I can say is WOW!! Wish that gentelemen would have the time and more room to spread out all the parts he has on top of the car, these cars weren't meant to be tabletops! 😆
I had to sell my big block 440 auto duster few months back I still have hemi dart and formula s barracuda and Al the parts and still have my shop. Was lucky to have gotten a few neet jobs 1930 ford couoe with blower motor needing rebuild and a cool 48 Plymouth with magnum 360 and 727. Anyway love your channel and that's so awesome you answer me back !!!! Keep up the good work !!!!
The sad part about all this is is this stuff is actually not going to be worth that much in the years to come why because people like us are dying and younger generation doesn't care
You’re right unfortunately. Jay Leno even brought up this point. It’s like when I was growing up I couldn’t care less about Packards, and Model T’s and all the antique cars that our parents and grand parents went nuts over. I wanted muscle cars. Now I know some older than me guys that can barely give a model T away. Virtually no one wants them. And the same will happen to our lusted after cars.
Rambling again but case in point, I remember when I was 14 years old and we had this little old mechanic in clarksburg WV that my grandad knew. And we were in his shop once and my grandad took me back in this barely lit part of the old brick garage and he showed me this black dusty behemoth of an old car and said: You know what that is? I say, no grandad. THATS A DUESENBERG!!! He said all proud. And I still remember the feeling I had inside. Yay? I guess? Totally unimpressed. I always wondered where that car went since they’re all accounted for.
@@davidreed3165you’re spot on, the young people these days are gonna be full on into powerful electric vehicles. They won’t have any interest in comparatively slow old muscle cars
You are incorrect. We see that young people are heavily interested in Muscle Cars, they just are not able to afford them. As they get older, they are able to buy stuff, and the market will still be good.
Most of the sales records survived, and in the 90s Larry Weiner partnered with Mr Norm to sort through the sales folders and make them available for people to check with him to see if their Dodge was one of the cars sold there. He had the sales envelope for my T/A, which I purchased. It even included a set of keys for my car!
Sounds like they didn't really care about the O.G. engine to that super bee. ,they lost his number?? Sounds like they should've sold all those valuable parts ,& bought it
Hey it's al with the hemi and formula s cuda and other stuff. I am mechanic!!! Worked for dodge for years o before I got m own shop !!! So your misfire code !!! Did anybody do any work and then clear codes ???? If you don't clear codes on misfire especially!! It will keep missing !! Now you have code 300 so it's random misfire your chasing !!! But ask if they tryed clearing it dyer working on it and has to be cleared !! By decent scanner also not cheap parts store and as far as lifter. Is it making noise ?? Tapping ??? Have them pull valve covers look at rockers make sure every rocker is moving about same distance as others Incase you have bad lifter or god forbid camshaft too it's possible even know you mentioned it's new motor worth checking !!! Also good scanenrs like mine I have autell. It has option for misfire counter and you can watch all 8 cylinders and it will ount every misfire. So you can see witvh ones are missimg the most and can you tell me if you feel the misfire and if it's low rpm or higher then 3000 rpm also your thing over drive for your challenger!!!! Messge me about that I may be able to help you and very affordable as long as you use it in uur car
I had to sell my big block 440 auto duster few months back I still have hemi dart and formula s barracuda and Al the parts and still have my shop. Was lucky to have gotten a few neet jobs 1930 ford couoe with blower motor needing rebuild and a cool 48 Plymouth with magnum 360 and 727. Anyway love your channel and that's so awesome you answer me back !!!! Keep up the good work !!!!
Nice V-code car...and "Little Red Express" truck....good content and thanks...🔧🔧👍
Thanks 👍
As an Australian Muscle car enthusiast, im blown away at the sheer size and scope of the American Muscle car scene from the 60/70's.
Its very rare here, maybe once or twice a year that an old muscle car from that era is found, but you guys have them popping up on what seems a weekly basis.
they made millions of them for over a decade!
Wow - great 71 Superbee and all those parts are great to see. Thanks for sharing.
Great video Ryan, was fired up to see a lil red express in this one. Very special trucks.
Yes they are, but that one is even more special being they bought it new.
'Young Punks' crack me up... I've been in MoPars since 1970, had a new GTX then. I've driven 150 miles at 80 plus MPH with 3.55 gears. Unless you have an existing problem, ANY MoPar engine from the 60's or 70's, even a 318 2 bbl will cruise 80 with 3.55 gears.
You must remember... It's not an exploding Chevrolet!
Roy and jamie are amazing down to earth people. I have got some parts from them but the vintage parts are so over priced i cant afford them. Thus why they have all this stuff. Lol roy hates to sell stuff too but thats a roy thing 😂 nice job showing everything so much cool stuff.
All I can say is WOW!! Wish that gentelemen would have the time and more room to spread out all the parts he has on top of the car, these cars weren't meant to be tabletops! 😆
That '71 Suoerbee 6-pack is the shiz! ❤
You should make a story about this one person in the San Francisco Bay Area who has over 40 Mopar 440 6 and hemi cars
I've heard of them, but no actual info on what's up with the guy.
I had to sell my big block 440 auto duster few months back I still have hemi dart and formula s barracuda and Al the parts and still have my shop. Was lucky to have gotten a few neet jobs 1930 ford couoe with blower motor needing rebuild and a cool 48 Plymouth with magnum 360 and 727. Anyway love your channel and that's so awesome you answer me back !!!! Keep up the good work !!!!
You have colapsed lifter or a pushrod or loose distbuter messing or a broken drivelock pin in the end gear.
Ryan I want to see you finsh your challenger and enjoy it . Lfe goes fast my friend
Someday I hope
Have you checked the wiring harness to the coil packs and injectors I know this may sound crazy but the evaporator canister is another place to check
We checked the harness on the coils, and they all seem fine. I am going to check the injectors today.
I want to see that lil' red express!! Maybe u can pull it out and do a video?
The sad part about all this is is this stuff is actually not going to be worth that much in the years to come why because people like us are dying and younger generation doesn't care
You’re right unfortunately. Jay Leno even brought up this point. It’s like when I was growing up I couldn’t care less about Packards, and Model T’s and all the antique cars that our parents and grand parents went nuts over. I wanted muscle cars. Now I know some older than me guys that can barely give a model T away. Virtually no one wants them. And the same will happen to our lusted after cars.
Rambling again but case in point, I remember when I was 14 years old and we had this little old mechanic in clarksburg WV that my grandad knew. And we were in his shop once and my grandad took me back in this barely lit part of the old brick garage and he showed me this black dusty behemoth of an old car and said: You know what that is? I say, no grandad. THATS A DUESENBERG!!! He said all proud. And I still remember the feeling I had inside. Yay? I guess? Totally unimpressed. I always wondered where that car went since they’re all accounted for.
Very true,
@@davidreed3165you’re spot on, the young people these days are gonna be full on into powerful electric vehicles. They won’t have any interest in comparatively slow old muscle cars
You are incorrect. We see that young people are heavily interested in Muscle Cars, they just are not able to afford them. As they get older, they are able to buy stuff, and the market will still be good.
Man , a friend in my brother's drove one identical, v code same color 4 speed, I recall he wrecked it in the late 70s . St. Louis local back then
Oye!
Whats the tell tale sign of a Mr. Norms car. What paperwork proves the authenticy of it?
Most of the sales records survived, and in the 90s Larry Weiner partnered with Mr Norm to sort through the sales folders and make them available for people to check with him to see if their Dodge was one of the cars sold there.
He had the sales envelope for my T/A, which I purchased. It even included a set of keys for my car!
Seth got to travel to Moparty in a new Challenger instead of your worn out old one 😎😝
He was definitely in quality this time.
A 440 block is about $1,000 dollars. That's at HP block
Why didn't you try trading parts, you know old school style???
Sounds like they didn't really care about the O.G. engine to that super bee. ,they lost his number?? Sounds like they should've sold all those valuable parts ,& bought it
Hey it's al with the hemi and formula s cuda and other stuff. I am mechanic!!! Worked for dodge for years o before I got m own shop !!! So your misfire code !!! Did anybody do any work and then clear codes ???? If you don't clear codes on misfire especially!! It will keep missing !! Now you have code 300 so it's random misfire your chasing !!! But ask if they tryed clearing it dyer working on it and has to be cleared !! By decent scanner also not cheap parts store and as far as lifter. Is it making noise ?? Tapping ??? Have them pull valve covers look at rockers make sure every rocker is moving about same distance as others Incase you have bad lifter or god forbid camshaft too it's possible even know you mentioned it's new motor worth checking !!! Also good scanenrs like mine I have autell. It has option for misfire counter and you can watch all 8 cylinders and it will ount every misfire. So you can see witvh ones are missimg the most and can you tell me if you feel the misfire and if it's low rpm or higher then 3000 rpm also your thing over drive for your challenger!!!! Messge me about that I may be able to help you and very affordable as long as you use it in uur car
It is definitely low speed. And we have cleared the code. As long as I go and drive, no problem. It's happening at low speed usually.
Yeee Yeee 😊
Come back in five more years and it will be completely stuffed full and covered with boxes.
I lived around the lacrosse area all my life. I think it’s a shit hole.
I mean, they all have some bad areas. I really like the lakefront area and the downtown.
Trust me message back for info on misfire !!! I can help !!! Wish you lived on long island or close I'd love to help you !!
It's just a P0300 code for a misfire. Just trying to find out where.
I had to sell my big block 440 auto duster few months back I still have hemi dart and formula s barracuda and Al the parts and still have my shop. Was lucky to have gotten a few neet jobs 1930 ford couoe with blower motor needing rebuild and a cool 48 Plymouth with magnum 360 and 727. Anyway love your channel and that's so awesome you answer me back !!!! Keep up the good work !!!!
That's cool! Thank you