ฝัง
- เผยแพร่เมื่อ 31 พ.ค. 2022
- Callibration and Update ELRS via EdgeTX Passthrough.
The latest Radio Transmitter from BetaFPV
#BetaFPV #LiteRadio 3 Pro #ELRS 2.4ghz
.
For Unboxing & First impression, watch on :
• BetaFPV LiteRadio 3 Pr...
.
Specification
Item: LiteRadio 3 Pro Radio Transmitter
Channel: 8 Channels
Gimbal: Hall Sensor
Frequency Range: 2.4G
RF System: SX1280 / CC2500
Antenna: Internal Antenna
RF Output Power: 50mW, 100mW, 250mW, 500mW (ELRS 2.4G)
Screen: 1.3 inch OLED display screen
Protocol Option: ExpressLRS 2.4G
Battery: Built-in 2000mAh 1S Battery
Operating system: EdgeTX 2.6 Santa
Port: Type-C USB 3.0 port / 3.5mm Audio port
USB Support: Most Practice Simulator / USB charging / Firmware update / Passthrough (ELRS 2.4G)
.
Get it now on
Droniac Bandung : www.tokopedia.com/droniac
Official BetaFPV Store : betafpv.com/collections/tx/pr...
.
Get EdgeTX :
edgetx.org/getedgetx
Get ELRS Configurator :
github.com/ExpressLRS/Express...
. - กีฬา
![☀ Аппа с ELRS для НОВИЧКОВ! А заменит ли она TBS TANGO? [Betafpv LiteRadio 3 ELRS]](http://i.ytimg.com/vi/JUWJps5ToCY/mqdefault.jpg)
![☀ Аппа с ELRS для НОВИЧКОВ! А заменит ли она TBS TANGO? [Betafpv LiteRadio 3 ELRS]](/img/tr.png)
![อาจารย์ยอด : ลุงแว่วเล่าเรื่องผี [ผี]](http://i.ytimg.com/vi/Fd2Qsy4dqpM/mqdefault.jpg)
Terima kasih atas video sauadara ini. Amat membantu. Terbaik 👍👍👍.
Amazing video
Trying to figure this out still
Binding ELRS 3 pro radio to a Betafpv 75mm pro
Think we can video chat to walk me through please?
If your 75pro is using the new fc with elrs serial rx then you have to update your literadio firmware to v.3.x because the rx in your fc probably use elrs v.3.x
Downgrading your fc elrs serial rx to v.2.5.x will work just fine but i suggest to update your radio firmware. Let me know in comment if you need help.
Would greatly appreciate your help.
Will to video chat if it helps
Nice tutorial! Could you make similar video about upgrade edgeTx on literadio3pro?
Yes, soon
Here it is update edge tx th-cam.com/video/WcGOHsM1Yzw/w-d-xo.html
Hi, I have literadio 3 pro elrs and I update my literadio 3 pro and also my namimno receiver but when I am flying I see some slowness(dropping frames) in my view with dji o3 unit. This is not happening with my crossfire.But video recording is ok. This also happened in two receivers and my 2 flight controllers. I don't understand why? Do you? Thanks!
sorry I don't use DJI O3 so I don't have idea why that's happen. elrs use 2.4gHz while crsf use 868-915mHz, however I haven't hear such problem from my friend who use O3 & elrs
@@gonebdg I tried everything and I figure out that there is interference between literadio 3 pro and dji o3. I changed the literadio frequency a little and it is much betterbut still not smooth like crossfire . Thanks
Hello I mostly everything in your tutorial and I've updated my ExpressLRS to 3.2.1(Tx and Rx) but I have a problem with my AUXes.
Everytime I restart my radio I only have set sticks and AUX1 in my mixes so I have to add the rest manually and every time I did it it just consumes my memory/space in mixes. Right it is at 25/64 but I can see only 5 channels there(sticks and AUX1) so where is the rest?.
Do you know what the reason might be?
Create new model and start over.
The existing/previous models might corrupted after update, you better delete all.
@@gonebdg Thank you!!! Auxes don't disappear now. I just can't change my model name because I can edit the first letter but I think that's not a big deal.
Om saya punya liteRadio 3 pro juga, cuma jaraknya pendek banget buat nerbangin Cinebot30, di 200m sudah lost signal. Ada yg nyaranin naikan mw nya ke 100-120mw, bagaimana menurut om apakah aman?
LR 3 Pro max 250mW. Daya 50 - 100 mW & packet rate di 150Hz sdh aman utk 500m s.d 1.5km (tergantung sikon lingkungan terbang). Packet rate di 500Hz hanya sy gunakan utk race.
Kalau ragu dgn interferensi sinyal dan kondisi lingkungan, ya set max saja di 250mW (aman walau jadi agak boros baterai), lalu set juga packet rate di 150Hz.
Jika ingin lbh mantap lagi ya modif antenna, ganti internal ant. Dgn Moxon Radiomaster di 250mW & 150Hz bisa 5Km.
@@gonebdg iya om, tadi juga ada yg nyaranin upgrade antena ke RadioMaster RP4TD 2.4GHz ExpressLRS ELRS Diversity Receiver RX, cuma sy belum tau compatible atau engganya dengan LR3 pro, masih sy cari tau.
Btw thanks banget om sarannya!
@@gonebdg saya subscribe dulu ah! jarang banget dapet channel yg se-teknis ini. Mantap om
Wah sebenarnya ga perlu upgrade ke RX Diversity kecuali mau longrange atau terbang di lingkungan yg banyak interverensi & noise seperti konser musik. Kalau utk harian mid-range cukup modif Antenna TX Lite3Pro nya seperti yg saya lakukan.
Ada video / contoh modif TX nya kah om?
Mine says INT-RF for option one not ELRS?? But my box stated i have the elrs model? Have i been sent the wrong one?
How did you know it wasn't ELRS ?
model > Internal RF > mode = CRSF
@@gonebdg its elrs lol i just paniced because yours said elrs i will follow your video i hope it fixes my problem lol im a noob
@@zombie_brainsgaming9562 i see ... hope it help 😉
Halo om kalau boleh tau cc2500 itu sama dengan elrs tak ya ?
Tidak sama dan samasekali berbeda.
CC2500 adalah chip wireless module 2.4ghz yg biasa digunakan utk multi-protocol Tx.
ELRS adalah radio control link baru yg mendukung 2 jenis standar komunikasi RF : LoRa & FLRC, dan saat ini umumnya menggunakan RF chip SX1280 (2.4Ghz) atau SX127x (868 / 900Mhz)
hello, is it possible to get the last GPS coordinates on the screen?
Yes it possible
@@gonebdg do you know how to do it? That’s the main thing stopping me from getting it!
@@giuroy make sure your quad bound to yiur radio. Next, on your radio go to your model then open telemetry page 10/11
Scroll down to menu "Discover new"
Stop if all sensors especially GPS already found.
Next open page Display 11/11
Feel free to arrange where you want to display GPS or other sensors on the available screens (1 - 4)
After all of those are done, go back to homepage and press down the right joystick/button for 1.5 - 2 seconds to open/switch between Screen 1 - 4
kalo downgrade firmware drone g masalah om? atau ada dampaknya?
Ga masalah, tapi utk apa downgrade.
Dampak pasti ada namun bukan berarti masalah. Baca saja changelog dan release note versinya.
@gonebdg soalnya drone crux35 fimrware v3, ga bisa binding ke remot betafpv literadio 3. jadi pen coba downgrade drone nya om ke v2
@@gonebdg biasanya dampaknya seperti apa om?
@@dkf0303 itu crux rx elrs nya serial atau spi? Qlo serial cukup rx elrs nya saja yg di downgradr tapi qlo spi ya ga ada pilihan lain memang harus downgrade versi BTFL di FC nya.
Dampak downgrade versi, fitur² tidak selengkap yg di atasnya lalu perbaikan dan optimalisasi yg ada di versi atas juga jadi "hilang" di versi bawah, namun semua itu blm tentu dibutuhkan.
kalo remot ini bisa binding ke crux35 elrs terbaru?
Bisa dan akan selalu bisa di upgrade versi ke rilis terbaru
kalo untuk betafpv lite 3 bukan yg pro bisa di upgrade firmware nya ke 3.0?
Beda, update & settings pakai betafpv configurator dan blm bisa up ke elrs v.3 sejak 2thn lalu blm ada update dari betafpv nya. Cek di github.com/BETAFPV/BETAFPV_Configurator/releases
@@gonebdg kenapa ga bisa om ya? elrs bukannnya bisa di update?
@@dkf0303 sebenarnya sdh cukup jelas di komen saya sebelumnya, tapi ok saya jelaskan lebih lanjut :
betafpv radio lite (1/2/3, dst) dibuat secara khusus dan di maintain sendiri oleh betafpv jadi segala hal terkait firmwarenya baik protocol link (khususnya elrs) maupun radio tx OS nya tergantung team devs. betafpv berikut configuratornya
betafpv radio "PRO" dibuat "mengikuti standard" jadi segala hal terkait firmwarenya baik protocol (khususnya elrs) maupun radio OS nya mengikuti rilis resmi masing-masing protocol link maupun radio tx OS
apa itu OS ?
OS = Operating System (OpenTX, EdgeTX, dll)
@@gonebdg ok om mksh bnyak nih penjelasannya. ntar saya maen ke bandung
My controller betafpv cannot working in liftoff, i play in windows 11, but its work on diff simulator, can you help me?
Hello, if it work with other sim then it should work (no driver issue). Please try to check the liftoff config or check windows tasks manager, maybe there is an app. which still using it in background
@@gonebdg what about the liftoff config settings, the problem is I'm not opening another simulator, but it's still like that
@@yttwo3887 you can check it with your steam app. Menu > View >> Settings >>> Controller
click "General controller settings" and you should see Detected Controllers = BETAFPV LiteRadio 3 Pro Joystick
if you didn't see it or your steam app. doesn't detecting it then you can try "Recover Steam Controller Firmware"
om, stm32 udah di instal tapi ga kebaca om gmna?
Coba ganti kabel dan pastikan daya di komputernya masih mencukupi utk mensuplai daya ke setiap I/O yg di pakai khususnya USB port. Check juga di device manager kedetect sebagai apa.
Tanya bang aku ngikuti cara upgrate fIrmware abang dan repotnya sukuses pas mau update Lua nya menu setup nya page 1 hilang page 2 sd 7 masih jadi g bisa update dan stiknya tidak respon sampai sekarang masih cari penyebabnya abang ada solusi ….. thank
Cek sd card
@@gonebdg apakah perlu diformat atau apa bang karena fisik sdcardnya kan g kelihatan di dalam ya mohon penjelasannya thank banget sebelumnya
@@sigitgunawan-tv7xc sd card kan kebaca di komputer via usb cable ke dectect removable disk. Qlo ga kebaca di komputer berarti ada yg salah.
Qlo mau cek fisik ato ganti sd card yg bagus, bongkar remote nya.
@@gonebdg ok masih kebaca bang ada 2 directory USB Drive (D) dan directoRy R
ADIO (E) tapi kalau di flamboyan selalu gagal
Topo di flash
my elrs keeps loading and knothing shows up :/
Make sure that your radio is the elrs version instead of multiprotocol and use the correct version of LUAscript
@@gonebdg it is and the LUA script I updated, I gotta open the script in the controller??
@@beni_Silvaplease watch again between minutes 18-21
@@gonebdg It worked for me thanks I just can connect the fc to betaflight idk why it keeps "connecting"
@@beni_Silva the elrs should be in the same major version. If elrs in your controller is V3 then the elrs in your fc should be V3.