Thanks for watching, don't forget to subscribe! I have tested many treads for handle wrapping but couldn't find one. But later at that night while brushing teeth I found the perfect string for wrapping 😁. I was not able to produce a hamon because of thin blade, later I will try to fine-tune that. Please put any suggestions for future projects, feedback's and questions in the comment section.
Rather than making it with a thread you can also use electronic tape that black colour one and cut in into really thin rectangular line and than making tsukamaki The fact that you made it in full traditional way is just too amazing because I made a miniature myself using popsicle sticks Great work love this
no offence but i was hoping for more of a how to than a here watch me make it with out actually teaching you how to like a how to video goes but i still think it was a good video and you put in a lot of effort and how much to get one from you i also saw that you said what materials you used but not exactly how you made it so id love to know how you did it but also even if i did i probably would never be able to and i don't have the tools or experience that you do to be able to make it overall great video and very helpful saying the materials just need the steps on how to do it
Amazing job😍!!! No words to explain the craftsmanship😲. Every single piece is a beauty and worth the trials! Good to know the anatomy of Katana😎🤺. The whole video is kinda creative meditation to watch & final bgm reminded me of Bahubali🤩. Keep it up👍🏻
Hello, I am also making similar kind of blade but the difference is I have a nail instead of the metal sheet. I always see your video and then proceed for ry work. Thanks
Your are exactly right. I learned that after making the video. I am planning to make a full explained tutorial, that time I will be careful. thIs Is jUst To trigGer YouR OCd 😜 It's setting off my OCD also 😑
no offence but i was hoping for more of a how to than a here watch me make it with out actually teaching you how to like a how to video goes but i still think it was a good video and you put in a lot of effort and how much to get one from you i also saw that you said what materials you used but not exactly how you made it so id love to know how you did it but also even if i did i probably would never be able to and i don't have the tools or experience that you do to be able to make it overall great video and very helpful saying the materials just need the steps on how to do it
First video of yours that I’m seeing and I have to agree with some of the comments. You could really become popular with enough exposure. Your content is really unique and interesting.
Hello, is it possible to buy a Katana on request? I am interested in the same model in the video. How much would its value be in American dollars (USD)? I will be attentive to your answer. thanks in advance.
@@bibinsagaram Good :( but your answer makes me very sad. I have budgeted $ 85.00 (USD) for the Katana. If you are interested let me know. I'm in no rush to manufacture, I can wait for whatever I see fit. And from now on I apologize if my translation is not good, I actually speak Spanish.
Awesome video, gave me loads of tips for making one! I just got a 1/3 scale doll and realised theres virtually no 1/3 scale accessories out there, so will have a go at making one myself.
Excellent work! My friend can you tell me at 1:30 why you file the sword in this way (file together with wood and iron bar)instead of just keeping the file on your hand. thank you
How about you make a miniature model of a plane hmm? Ik u have done it in the past and I've taken inspiration from that project of yours, So I'd love it if u try making a fa/18 hornet
Thanks for watching, don't forget to subscribe!
I have tested many treads for handle wrapping but couldn't find one. But later at that night while brushing teeth I found the perfect string for wrapping 😁.
I was not able to produce a hamon because of thin blade, later I will try to fine-tune that.
Please put any suggestions for future projects, feedback's and questions in the comment section.
100% Perfection! Nice bgm too!
Thanks Cheta 😊
Nice!!
Rather than making it with a thread you can also use electronic tape that black colour one and cut in into really thin rectangular line and than making tsukamaki
The fact that you made it in full traditional way is just too amazing because I made a miniature myself using popsicle sticks
Great work love this
no offence but i was hoping for more of a how to than a here watch me make it with out actually teaching you how to like a how to video goes but i still think it was a good video and you put in a lot of effort and how much to get one from you i also saw that you said what materials you used but not exactly how you made it so id love to know how you did it but also even if i did i probably would never be able to and i don't have the tools or experience that you do to be able to make it overall great video and very helpful saying the materials just need the steps on how to do it
You should promote your channel across TH-cam, you have a huge potential to become very successful.
Awesome videos!!🔥
Thanks a lot 😁
for some reason watching you make this is oddly satisfying anyways keep up the good work!
Thanks a lot ☺️
Done with great finesse 👌🏽nice one man 😀
Thanks bro 😊
Mini he man sword meking video
👍
Bárcsak én is tudnák ilyet.
😀
Nem tudnál nekem is készíteni egyet?😀😋
Awesome job, you are the only person I can find that pays so much attention to detail and makes a katana the right way even though its mini.
Thanks a Lot !
Wow.The fact that it actually cuts takes it to the next level.
😊 yeah
Why so small views?
TH-cam Algorithm haven't started recommending my videos. Most of my views are coming from search. Thanks for the support 😊
This is called Perfection. It is really amazing. Hats off to your hard work and patience. Bgm is also awsome. Keep going.
Thanks da 😊👍
Amazing job😍!!! No words to explain the craftsmanship😲. Every single piece is a beauty and worth the trials! Good to know the anatomy of Katana😎🤺. The whole video is kinda creative meditation to watch & final bgm reminded me of Bahubali🤩. Keep it up👍🏻
😘😘😘
I love watching these types of videos because I know I’ll never be able to do what they do
Try, you will be able to do it someday.
I’m making one right now.
This could literally become a pocket knife... I mean pocket katana
Yes!
Sir can you give tamplate in this video ... please....i am waiting 😟😟😟
Link to the drawing is attached on the description.
drive.google.com/drive/folders/1WMRNfmdea31_yvtg74V6TNdDBadbvjBx?usp=sharing
Super Unni Chetta
Thanks Pranav 😊👍👍
What was the main reason you applied the clay mixture on the blade?
Please read the description on the video.
This man truly loves what he does. Such dedication level and patience ❤️. Amazing Craftsmanship. So much to learn from you brother😇
Thanks a lot for the support 😊
Hello, I am also making similar kind of blade but the difference is I have a nail instead of the metal sheet. I always see your video and then proceed for ry work.
Thanks
Thanks a lot ☺️
Make sure that the nail is high carbon steel, then only it can be heat-treated. Spark test will do the trick.
Good work bro😍
Thank you so much 😀
Thank you for including the drawings. i’m going to try to make my own one. You might not see this, but if you do thx anyway
👍 welcome
Perfection! 💯 😍
Amazing Job Brother!❣️
Thanks bro 😊
One of the awesome video i have seen in recent year 👍👍👍👍👍
Thanks a lot Ananthakrishnan :)
Nice work but the habaki is upside down
Sorry didn't understand.
wooooooooow i have making this katana from your video thats works !!! 😁😁😁
Thanks brother 🙏
Thank you for anserw me !!! 😍😍😍😍😍😍😍😍
Perfect Katana waiting for next video bro
Thanks Bro ☺️
sir, how can i make a bevel....ple make a tutorial for how to do it....that jig thing...thanks
I will try 😊
I didn't think too much of it until I realised how small some of the parts were! This is AMAZING! I wish I could do this!
Thank you so much!
Tuyệt vời
Ao ước có được một thanh kiếm này ❤️❤️❤️❤️❤️
cảm ơn !😊
Why i am watching only 293 views there should be minimum 10 million views
Thanks 👍👍☺️
What’s the glue called? Good job btw. Looks amazing💯
Thanks a lot, it's CA glue.
Can you give it to me please ,please,please,please,please,please,please,😇😇😇😇😇😇😇😇😇😇
🤭
Damn cool!
Thanks Bro 😊
Bruh, this is so amazing. If only I could buy something like this
Thanks bro 😊
My ocd here,don't put the katana faced down.itl slowly over time cut through the sheith and keep the handle to the left
Your are exactly right. I learned that after making the video. I am planning to make a full explained tutorial, that time I will be careful.
thIs Is jUst To trigGer YouR OCd 😜
It's setting off my OCD also 😑
Amazing ..! I wish I could buy that ...:
Thanks
Sir , what is the size of brass sheet for guard ........ I am waiting 😟😟
1.5 mm thick
no offence but i was hoping for more of a how to than a here watch me make it with out actually teaching you how to like a how to video goes but i still think it was a good video and you put in a lot of effort and how much to get one from you i also saw that you said what materials you used but not exactly how you made it so id love to know how you did it but also even if i did i probably would never be able to and i don't have the tools or experience that you do to be able to make it overall great video and very helpful saying the materials just need the steps on how to do it
Thanks 😊, I will probably make one more video with explanation. Stay tuned.
First video of yours that I’m seeing and I have to agree with some of the comments. You could really become popular with enough exposure. Your content is really unique and interesting.
Thanks a lot 😊
I wish I could have it :/
:)
Super👍👍👍
Thank you 👍
Wow!! Pretty amazing! I actually collect sword / letter openers and this bad boy can open just about any delivery.
Thanks a lot :) That's right!
Can we buy 1mm thick plywood by online but what is the application
Name is Birch plywood, used for aeromodelling and model making.
You have the best talent man youre definitely worth to subscribe
Thanks a lot bro!
Beautifully crafted. Attention to detail is awesome. 👍🏼👍🏼
Thanks Arul 👍😊
I want to make one but even smaller. Where do you get tiny drill bits?
Amazon
Hello, is it possible to buy a Katana on request? I am interested in the same model in the video.
How much would its value be in American dollars (USD)?
I will be attentive to your answer. thanks in advance.
Thanks a lot for your enquiry. I am sorry to inform you that currently I am not planning selling it. If I have any plans I will let you know 👍
@@bibinsagaram Good :( but your answer makes me very sad.
I have budgeted $ 85.00 (USD) for the Katana. If you are interested let me know.
I'm in no rush to manufacture, I can wait for whatever I see fit.
And from now on I apologize if my translation is not good, I actually speak Spanish.
Mind blowing👌🏻 This requires great amount of patience and dedication
Thanks bro 😊
Sir , where i can buy 1mm thick plywood ?
Online, search for birch plywood
Please sir tell me about the mixed paste. The name what is the name of that thing.
Please read description below the video.
I really love it. Maybe it’s very expensive 🤔
Thanks a lot :)
Truely marvellous bro !! 🤩🤩 amazing perfection 🤩
Thanks Bro 😁
The detail on this .... omg I'm sitting here like 😯
Thanks a lot Ferny 😊
Also I wanted to know that are u from kurnool and in andra pradesh
I am from Trivandrum, Kerala
Amazing, really good work 💪🏻
Thanks a lot !
Awesome video, gave me loads of tips for making one! I just got a 1/3 scale doll and realised theres virtually no 1/3 scale accessories out there, so will have a go at making one myself.
Thanks 👍
Really amazing one👏👏👏👏
Thanks 😊👍
Master craftsman!
Thanks Bro ☺️
And my question is are you from India and where
Yes! I am form Kerala.
Amazing job😍 👍 Loved the last few seconds... the BGM was awesome...got goosebumps 😃
Thanks Cheta 😊😊
Cooooooooooooooooooooooooooooooool!
Thanks 👍
Unbelievable!! 😍😍😍 How many hours did it take to complete this?
Thanks 😊.About 60 hrs, I made a lot of mistakes. Most of the parts had multiple trials.
@@bibinsagaram Wow!! Dedication 💯💯💯💯
круто
Благодарность
Super👍
Thanks 👍
does it made from iron ???? or steel tell me know
Made of steel, 1095 high carbon steel
Super
Thanks Arshida 👍
BO STAFF
👍
Excellent work! My friend can you tell me at 1:30 why you file the sword in this way (file together with wood and iron bar)instead of just keeping the file on your hand. thank you
Thanks a lot! That is jig is used to keep a correct bevel angle. Same angle can be replicated easily in both sides.
@@bibinsagaram the other side of the jig is steady in a certain point? Thank you
@@GunmanBricks th-cam.com/video/r9iNDRwwBQQ/w-d-xo.html this video will help you to understand it better.
@@bibinsagaram thanks man
How about you make a miniature model of a plane hmm?
Ik u have done it in the past and I've taken inspiration from that project of yours, So I'd love it if u try making a fa/18 hornet
Sure I will add it to idea list 🙂
Day 2 of asking for mini rpg
😇
Is this for sale if so I’m interested!
Thanks for asking, don't have plans to sell it.
damn i want to make these to but i dont have the tools lol
Thanks a lot, try making
@@bibinsagaram dude you did an awesome job on the sword
@@bibinsagaram is there anyway you can sell it to me?
@@arcy6669 only have one, not planning to sell.
I made this too in last year. But from 12cm nail, and Need 7 day to completely that sword. but unfortunately I didn't film it
Next time film 🎥 it and put it on TH-cam! 😊
@@bibinsagaram yes I will start the video. even if only using a cellphone camera haha
@@chefbulengcorp9751 that will be fine 👍
Wow such a delight to watch!
Thanks Bro ☺️
Be care full mam you are gonna cut one of your fingers trust me it will hurt so bad
👍
And the small katan is real?
awesome.this looks like nihonto
Thank you 😊
Qual a chapa que foi usada para fazer a espada
1095 High carbon steel
Superb. Would you consider selling it? Or making one as a custom order?
Thanks a lot, not yet since it takes a lot of time.
@@bibinsagaram I understand the humongous effort. Great work man. Any day you are ready to sell it or make one more, You have me on waiting list.
Thanks man, sure 👍
can i buy it or give a order for a mini katana
Sorry not for sale
Nice. Very dope blade👍
Thanks a lot
whoa that is very nice
Thanks a lot!
Very nice..can i buy it sir.?
Thanks 😊. Sorry, Not for sale.
This vid is mad, u deserve a sub.
Thanks a lot 👍
you forgot hamon line
No, there was a problem while making Hamon. I have given details on the description of the video.
youre is master sir 👍
Thanks a lot !
Sir what is the katana height
14.6cm long
One day a rat will pick this up
Teenage Mutant Ninja Rat's
i wanna try to make one of these, a bit bigger though maybe around 8 inches
👍 all the best
how to buy that and where
Sorry, don't have plans to sell
Brother your creativity is next level .... superb finishing.... and the way of making is awesome 👌
Thanks a lot bro 😊
how much does it cost?
Sorry, not selling it.
I want one! 🔥🔥🔥🔥🔥🔥🔥
😁👍
are you selling?
sorry, no
So cute i want this
Thanks a lot 👍
Subscribed ❤️❤️❤️
Thanks for your support :)
Nicely done 👌.
Thanks 👍
Granade launcher
👍
Awesome stuff bro! I really loved the fact that you heat treated your blade!😁
Thanks Bro 😁
give me mini katana
😬
Wow😮😮😮😮😮😮😮😮😎
Thanks a lot ☺️
Can I buy one?
Sorry, not for sale