Good job 👍. The work is very appreciated! I know that Casey is stoked that his blazer is getting worked on. He's real and a cool guy, so he deserves all the blessings. By doing good work for this cool mechanic, you'll get a positive reputation out in the public for doing the job. Keep up the good work, it's appreciated by others. Great video 📸. Thanks.
I'm more impressed by the amateur built vehicles and as an amateur builder, you got this. I can't wait to see you finish yours as well, I think they'll compliment each other.
Looks friggin sweet! Kick ass fab work! You should french in some cup-holders in that console! Maybe even french in a cosole insert (Cooler for six packs of B....Soda.)
🎉🎉,Another longer lol video lol.😅😅 I look forward to ever week, n I like your cardboard Is technique with a roller. Like I've Said in my past comments.not everyone know how 🤔 took brother. Iam 52 n have forgotten alot of poop 💩 😕. Your skill on Sheet metal fab is awesome.😊I also use a plasma cutter. I CALLED IT MY STAR WARS LIGHT SAVEER !! IT SAVES NOT CHEAP 3in cutting disks lol Jason ,Wichita kansas 🤣 😆 ❤❤🎉🎉🎉🎉
I like that shop you have. Looks like a good size for a residential area. Where I used to live used to work on cars and neighbors always calling code enforcement. Put antique plates on everything I could so they were registered. 😁 I am out in the country now but no shop yet.
Locking pliers, Vice grips, trade name, in the UK I knew them as Mole grips, well, 20 years later I obtained a pair of, MOLE grips, stamped MOLE BIRMINGHAM 😂
Nice work for it being a first time for the metal consol and bead rolling! You do not learn unless you try 🤙 I been watching casey since the under 1000 f100 chassis swap build and just added you to the subscribe list also! love watching people to learn knew ways and who still show this kind of stuff can be done in the garage at home and do not need a ton of fancy tools to get stuff done. The jeep rim got me would have never thought about that tbh. What model welder is that titanium? how do you like it? I have a Lincoln flux/gas welder for the last 10 years and looking at upgrading tbh i think it is just that time ......built a lot of jeeps with it and currently working on a 55 f100 but anything above 3/16 it doesn't like much and overheats really quick. Doing the truss on the 8.8 was a struggle this past weekend lol
Not a fan of the square corners on the console, if they were rounded like the front it would look better, and be more elbow friendly! Good progress though!
🎉, Jason, Ks again, I forgot to Mention about free metal people don't think about, there's alot poop ton free, it's a old not working Washer n dyers, people set on Herbs. N they work awesome 👌 on floor pans, plus they won't Rust, they have FREE COATING LOL 😅😅😮,rember if u grind were PPE, the Porcelain Coatings can be harmful to your lungs 🫁 , Jason, Wichita, Ks ❤🎉🎉🎉
Just for future reference. When doing things like the console, do the majority of your welding on the backside/ inside. Way less work grinding and filling.
I’m done with this channel 5 min of work stretching it out to a 20 min video plus ads Stop milking this truck for your channel KC will get it back once done we’ll review your mediocre fab skills FINISH THE TRUCK
You should start a fab shop and TH-cam channel if you can do all that work in 5 minutes. Maybe you should have stepped up when KC (Casey) asked for help. Who hurt you?
WE NEED SHIRTS DAMNIT!!
@@CaseysCustoms I’m workin on it!! 😆
The bl,azer is looking good it's a dam shame you didn't accept my 100-buck offer...Lol I'm kidding It would look good pulling the Vett or that 50
Big and tall sizes also! Dont forget about the dad bod crew. @@TrailerTrashRacing
@@LilBellow that’s my crew. I gotchu!
Good job 👍. The work is very appreciated! I know that Casey is stoked that his blazer is getting worked on. He's real and a cool guy, so he deserves all the blessings. By doing good work for this cool mechanic, you'll get a positive reputation out in the public for doing the job. Keep up the good work, it's appreciated by others. Great video 📸. Thanks.
Glad I’m not the only one that reflects on a project and be like “Dang, I’m the man!” 😂. Looks great man
@@shawngrantham6606 dude you have to! 🤣
That looks awesome, cool to see a floor in there ,microphone sounds way better
Y’all doing great! Cannot wait to see your finished product!
Center console looks great!
Man she’s looking good!!! I’m excited
Bead work is awsome... console looks good so far.
The old Blazers looking good keep up the good work I can’t wait to see it all lined out
Keep doing what you're doing my guy. Haters are going to hate that's what they do lol. Keep up the good work 🤙🤙
For 1st metal attempt, well done
Thanks bud
Impressive. I love the transition from cab front to back. It flows well. Looks great so far. Lot of work getting it to this point.
Looking good. Audio is way better.
Let’s go. Making it happen
Looking good great job 😊
Wow that looks bad ass. Can’t wait to see the rest of it.
Looking good brother, that custom console ties it all together.
@@ThaParisite thanks bud. We’ve been trying to work on it. Audio is tough! 😆
Keep it up brother. Casey sent us over, glad the video recommendation popped this up. Awesome build.
@@calebsmith9720 thanks buddy and welcome!
First time visiting, and about to start on custom interior of my 65 c10 panel. Loved it, and definitely subscribed. Thank you for posting!
Awesome! Thank you!
Big Update Start😂Working
Kicking butt 🎉🎉🎉🎉❤❤
This thing is looking awesome, I've always wanted a K5 blazer
I love it!
I'm more impressed by the amateur built vehicles and as an amateur builder, you got this. I can't wait to see you finish yours as well, I think they'll compliment each other.
Thank you very much!
Looking good dude. Very impressed. From Australia.
Man that looks good
Fantastic work, definitely something to be proud of!
Thank you very much!
J$ !!! good work bro :) This is huge inspiring. Looking forward to the finished product
@@bastholio thanks buddy! She’s coming along.
Looks good from Michigan!
Thanks bud!
Looks really good. Simple and clean Nice job.
Looks good
@@WhiskeyDents thanks brother
Looks super clean, good work 👍
Rome wasn't built in a day lol. Keep it up 💪 your doing well
@@garylamb4777 thanks bud!
It's looking good man y'all are doing a good job. Keep up the good work.
Looks friggin sweet! Kick ass fab work! You should french in some cup-holders in that console! Maybe even french in a cosole insert (Cooler for six packs of B....Soda.)
@@simpleman1963 cupholders for sure. The cooler thing sounds like an awesome idea too
Love the content you guys are doing great keep it up 👍
Thank you! Will do!
🎉🎉,Another longer lol video lol.😅😅 I look forward to ever week, n I like your cardboard Is technique with a roller. Like I've Said in my past comments.not everyone know how 🤔 took brother. Iam 52 n have forgotten alot of poop 💩 😕. Your skill on Sheet metal fab is awesome.😊I also use a plasma cutter. I CALLED IT MY STAR WARS LIGHT SAVEER !! IT SAVES NOT CHEAP 3in cutting disks lol Jason ,Wichita kansas 🤣 😆 ❤❤🎉🎉🎉🎉
Looking dang good man, nice job!!!
I like that shop you have. Looks like a good size for a residential area. Where I used to live used to work on cars and neighbors always calling code enforcement. Put antique plates on everything I could so they were registered. 😁 I am out in the country now but no shop yet.
Right on
Thanks bud. We love it
You guys are doing great work honestly. I would struggle to get half of this work done :(
@@dukeriluo thanks bud! You could do it. Just takes a little time and effort. Nothing too crazy!
Nice work
Mic made a huge difference. Music is still a little louder than your voice but it's way better. Keep up the good work!
I'm not in love with the console(too high) but you do good work. I watch to see your methods and I think you are doing great!! 🎉
@@randallwilliams8742 thanks for the love!
Popped up on the feed and I fell like this will have to be an every week watch like puddin.
This comment made my day!
Locking pliers, Vice grips, trade name, in the UK I knew them as Mole grips, well, 20 years later I obtained a pair of, MOLE grips, stamped
MOLE
BIRMINGHAM
😂
lol nice!!
Thats the same mic set we have been using the past few years
Aye brother better get you an old basketball pole like Casey!!!! Audio is way better🤟
Nice work for it being a first time for the metal consol and bead rolling! You do not learn unless you try 🤙 I been watching casey since the under 1000 f100 chassis swap build and just added you to the subscribe list also! love watching people to learn knew ways and who still show this kind of stuff can be done in the garage at home and do not need a ton of fancy tools to get stuff done. The jeep rim got me would have never thought about that tbh. What model welder is that titanium? how do you like it? I have a Lincoln flux/gas welder for the last 10 years and looking at upgrading tbh i think it is just that time ......built a lot of jeeps with it and currently working on a 55 f100 but anything above 3/16 it doesn't like much and overheats really quick. Doing the truss on the 8.8 was a struggle this past weekend lol
Thanks for the live. It’s a titanium mig 140. And I love it.
Bad Chads channel has taught me a bunch of tricks over the years
@@umustwantme I’ll have to check it out
Do you think the consul is a bit long ? Hard to tell from video…
You picked up rolling the sheets great….
Looks great quality work buddy, good luck
I sat in it off camera. It’s actually pretty perfect. Shifter handle could be a bit longer but it’s not bad
It would be dope if you made the console go threw the back
If you know anything about Casey you know the only approved method for bending metal is to use that basketball hoop in the driveway!
@@jasonhalvorsen1248 lol 😆 trying that on the next one
What brand of plasma cutter do u have and also are u pleased with it I'm wanting to get one is why I'm asking
Dude I love it so much. My favorite tool in the shop. It’s a warfox. $144 on eBay. Just search “warfox plasma cutter”
What settings u have the titanium welder on for spot welding that metal if u don’t mind me asking
@@anthonyacevedo8366 like 18.3 on both sides. Gotta be quick at those settings though. Can still burn through
You do amazing work!!! Hope your channel builds lots of subscribers as u definitely deserve that
@@anthonyacevedo8366 thanks buddy! I appreciate all the love!
Not a fan of the square corners on the console, if they were rounded like the front it would look better, and be more elbow friendly! Good progress though!
The console idea is good. Maybe, not my flavor, but this is america... WHERE ARE THE CUP HOLDERS?
Haven’t gotten there yet. Definitely coming though!
Thanks for the love!
Please move the tank and compressor location. It's just out of place there.
🎉, Jason, Ks again, I forgot to Mention about free metal people don't think about, there's alot poop ton free, it's a old not working Washer n dyers, people set on Herbs. N they work awesome 👌 on floor pans, plus they won't Rust, they have FREE COATING LOL 😅😅😮,rember if u grind were PPE, the Porcelain
Coatings can be harmful to your lungs 🫁 , Jason, Wichita, Ks ❤🎉🎉🎉
What is your welder set up?
@@zach9515 it’s a titanium mig 140 from harbor freight. Running solid wire with 75/25 mix gas
What size is your shop?
It’s…. 24x60 I think. It’s Lester’s shop.
@@TrailerTrashRacing awsome. I am building a 40x60 shop in Colorado
@@workingmansrestorations7071 going to be awesome! That’s huge.
Just for future reference. When doing things like the console, do the majority of your welding on the backside/ inside. Way less work grinding and filling.
I’m done with this channel
5 min of work stretching it out to a 20 min video plus ads
Stop milking this truck for your channel
KC will get it back once done we’ll review your mediocre fab skills
FINISH THE TRUCK
What will I ever do if you don’t follow my channel? Please don’t leave. You’ve literally changed my life!!!!
You should start a fab shop and TH-cam channel if you can do all that work in 5 minutes. Maybe you should have stepped up when KC (Casey) asked for help. Who hurt you?