i put 420 shocks on my 300 just experimenting back in 2013 and now a lot of people doing it. not to say i was the first person that done it but i helped a lot of people out for lifting their 300s cheaper than a lift.
I put a set of shocks from a fourtrax (rancher) 350 onto my 300, all around and it lifted it 2 inches on both ends. Good shock set up especially with a heavy load on the racks.
Mine came with the HiLifter kit and i really dislike the cv angle. The kit is just a little bit more than the foreman shocks. I think I’d like the foreman shocks would make the cv angle a slight bit better. They ride the cup with the highlifter kit. I have 26” as well that the previous owner installed.
Nice video the 300 looks good, but I have a quick question do you think Honda recon 250s are worth it I seen a couple up here in NC for like 800 bucks super clean just like that one I know there only 2wd but you don’t always need 4wd
Have you built any 2wd 300s the reason why I'm asking is I'm trying to get one and was just wondering what you recommend for tires, lift any help would be much appreciated. And I haven't seen a 300 that clean in a long long time absolutely mint 300 you are a lucky man. Also just watched your snorkel video on the beige 300 love the way you ran it. Sorry for the long post.
Hey, I made a 6in lift for my Honda 420, it worked alright, but it had bad bump steer because I tried to stretch it forward... how did you make your jig? I’d like to remake it soon and get her off the ground!!
I have a 89 and a 90 300 fourtrax and the front shocks has a big nut at the top where the shock bolts up. But the lower bolt is just like any old shock. How do I lift it
I have the same bike problem I’m having is my ignition bought one and for some reason the light will not turn green stays red. Do you happen to have the part number for the ignition?
There's a bunch of different things that could cause that. Which light is red? Reverse or oil? There are cheap aftermarket ignitions on Amazon if you just want to try that first
hey man do you think someone with no experience could take care of the polaris ace by himself (my parents don't want to do anything to it they want me to take responsibility) [im 15 if you are wondering]
My front tires are shaking on my fourwheeler we put new tie rods and ball joints on and re alighned then but it shakes the handle bars back and fourth and the u can see the tires shaking it is a 06 foreman 500. What should I do?
Hey man I’m a big fan I’m 13 and have a Honda recon 250 can u put some big tires on a ho da recon so I can see how it looks before I buy them also I think I will be a good idea to do because you haven’t done a ho da recon yet
i put 420 shocks on my 300 just experimenting back in 2013 and now a lot of people doing it. not to say i was the first person that done it but i helped a lot of people out for lifting their 300s cheaper than a lift.
Any tips?
I put a set of shocks from a fourtrax (rancher) 350 onto my 300, all around and it lifted it 2 inches on both ends. Good shock set up especially with a heavy load on the racks.
What yr rancher shocks did you use ? I'm looking into this myself. The video said 420 with 3 1/2 inch lift, I'm only wanting 2 inch
Daaamn that is such a majestic machine
I’ve heard of the brute force 750 shocks also.... that’s what I’ve always used, I’ll have to try out some of the foreman shocks though
foreman shocks are really hard to get in. they are to long
Will you make a video on how you lift and stretch the rear
Yep
Mine came with the HiLifter kit and i really dislike the cv angle. The kit is just a little bit more than the foreman shocks. I think I’d like the foreman shocks would make the cv angle a slight bit better. They ride the cup with the highlifter kit. I have 26” as well that the previous owner installed.
Keep it up 🤙🏼
When did they start makin a foreman 420 🤣
I think he meant rancher 420 or foreman 450 lol
Nice video the 300 looks good, but I have a quick question do you think Honda recon 250s are worth it I seen a couple up here in NC for like 800 bucks super clean just like that one I know there only 2wd but you don’t always need 4wd
No they are geared high no gear reductions available and weak rear ends
I think reduction boss started making a 30% for the recons about a year ago
Have you built any 2wd 300s the reason why I'm asking is I'm trying to get one and was just wondering what you recommend for tires, lift any help would be much appreciated. And I haven't seen a 300 that clean in a long long time absolutely mint 300 you are a lucky man. Also just watched your snorkel video on the beige 300 love the way you ran it. Sorry for the long post.
Did a 2wd 86 trx250 never messed with a 2wd 300
If I am running the same size tire front and back, what pressure difference would you recommend?
Is there anyway to correct the camber on a 300?
Hey, I made a 6in lift for my Honda 420, it worked alright, but it had bad bump steer because I tried to stretch it forward... how did you make your jig? I’d like to remake it soon and get her off the ground!!
I have a 89 and a 90 300 fourtrax and the front shocks has a big nut at the top where the shock bolts up. But the lower bolt is just like any old shock. How do I lift it
what did you do for the rear?
Can I put the 420 shocks and a 2 inch bracket lift on a 99 2wd Honda 300?
I may be wrong but I think your a arms will bottom out
Would foreman 450 shocks work
What thickness of spacers did you put on?
How do I lift my Honda Fourtrax 300 4x4 easy??
Sup dude I can’t believe I found you here lol I’m subbed btw
I have the same bike problem I’m having is my ignition bought one and for some reason the light will not turn green stays red. Do you happen to have the part number for the ignition?
There's a bunch of different things that could cause that. Which light is red? Reverse or oil? There are cheap aftermarket ignitions on Amazon if you just want to try that first
I was pulling some logs in reverse and popped something in my transfer case on a 98 Honda fourtraxs 300 4x4. Could someone tell what it mite be.
Take it apart your gonna find out pretty quick
What’s the difference between a hp4 shock and hp5
What about the back I’m about to do the same thing so what do I do about the back shock
Bc there ain’t no lift there
Im askin the same question tbh
What would be a shock replacement for a 01 rancher 350 4x4 to lift
what are you suppose to look for
What happened to the hondagade
Will this work on a 2wd 300 or just the 4x4.?
It will work on 2wd
Do you think my 2019 rancher can spin 28 inch moto havoks?
No.
hey man do you think someone with no experience could take care of the polaris ace by himself (my parents don't want to do anything to it they want me to take responsibility) [im 15 if you are wondering]
Yeah. Gotta learn somehow. Lots of info online
Cody Parker thanks - is polaris the best resource...?
Do u still have the honda gade
Those guards gonna go
What about the rear end???
Have other videos on that
Lot of angle on them front axles
I've ran way worse on 300s no problem
Will this work on a rancher 350?
Not sure
Wayne S id say yeah try it I put a 1997 foreman 400 shocks on my Honda recon
I used the Rancher 350 shocks on my 300 Honda four trax. Worked well. No worries about toe on the front end. Steers well.
My front tires are shaking on my fourwheeler we put new tie rods and ball joints on and re alighned then but it shakes the handle bars back and fourth and the u can see the tires shaking it is a 06 foreman 500. What should I do?
Man that would be a great question for the mudpuppy Q&A Facebook page
Also need to provide more details like what speed does this happened on and what sort of terrain
Wheel bearings bud
It’s not wheel bearings we put new wheel bearings in it
Hey man I’m a big fan I’m 13 and have a Honda recon 250 can u put some big tires on a ho da recon so I can see how it looks before I buy them also I think I will be a good idea to do because you haven’t done a ho da recon yet
he isn't gonna go out of his way to show you something, do some research
Second Gen 300 that’s a 94 right ?
97
My 300 has bear claws
Foreman 420
You talk so fast i miss a lot of what yur saying...